journal article·2019-07

Micromechanical estimation of effective thermal conductivities of metal matrix nanocomposites with local carbon nanotube agglomeration

Chuanzhen Wang, Xiaolu Sun, Jianjun Deng

Publisher page

Abstract

Abstract This study aims to estimate effective thermal conductivities of metal matrix nanocomposites (MMNCs) containing carbon nanotubes (CNTs) using a new hierarchical micromechanical method. Nano-filler agglomeration made of CNTs into the MMNCs, frequently encountered in real engineering situations, is considered as the main novelty of this approach. Also, two important parameters, including CNT curvature and interfacial thermal resistance between the CNT and metal matrix are taken into account in the micromechanical modeling. The developed hierarchical approach is validated through the comparison with the experimental measurements available in the literature. When CNTs are not well dispersed into the metal matrix, by incorporating the interfacial thermal resistance, CNT curvature and agglomeration, the predictions are in good agreement with the experiment of MMNC thermal conductivities. The results reveal that the CNT agglomeration can dramatically decrease the MMNC thermal properties. It is confirmed that the key issues to enhance the thermal conductivity of CNT-reinforced MMNCs are homogeneous distribution of CNTs and decrease of CNT/metal interfacial thermal resistance. Also, it is observed that the MMNCs show a significant improvement of thermal conductivity by alignment of CNTs into the metal matrix. The effects of CNT volume fraction, diameter and length on the MMNC thermal conductivities are examined.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermal properties of materials · Aluminum Alloys Composites Properties · Composite Material Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Interface in carbon nanotube reinforced aluminum silicon composites: thermodynamic analysis and experimental verification10.1016/j.jallcom.2009.03.055 ↗
2. Mechanical and thermal properties of nanocarbon-reinforced aluminum matrix composites at elevated temperatures10.1016/j.compositesb.2016.09.017 ↗
3. Thermal conductivity of polymer composites based on the length of multi-walled carbon nanotubes10.1016/j.compositesb.2015.05.012 ↗
4. Improving the strengthening efficiency of carbon nanotubes in titanium metal matrix composites10.1016/j.msea.2017.04.026 ↗
5. Prediction of the mechanical characteristics of multi-walled carbon nanotube/epoxy composites using a new form of the rule of mixtures10.1016/j.carbon.2010.05.007 ↗
6. Effects of interphase on tensile strength of polymer/CNT nanocomposites by Kelly–Tyson theory10.1016/j.mechmat.2015.02.002 ↗
7. Micromechanics modeling of the electrical conductivity of carbon nanotube (CNT)–polymer nanocomposites10.1016/j.compositesa.2012.12.008 ↗
8. A review on the strengthening of nanostructured materials
9. Synergistic effect of CNTs reinforcement and precipitation hardening in in-situ CNTs/Al–Cu composites10.1016/j.msea.2015.03.007 ↗
10. Improving the mechanical properties of carbon nanotubes reinforced pure aluminum matrix composites by achieving non-equilibrium interface10.1016/j.matdes.2017.01.096 ↗
11. Effectively enhanced load transfer by interfacial reactions in multi-walled carbon nanotube reinforced Al matrix composites10.1016/j.actamat.2016.12.022 ↗
12. Investigation of the interfacial reaction between multi-walled carbon nanotubes and aluminum10.1016/j.actamat.2006.06.031 ↗
13. Extraordinary strengthening effect of carbon nanotubes in metal-matrix nanocomposites processed by molecular-level mixing10.1002/adma.200401933 ↗
14. Reinforcement with carbon nanotubes in aluminum matrix composites10.1016/j.scriptamat.2008.04.006 ↗
15. Length effect of carbon nanotubes on the strengthening mechanisms in metal matrix composites10.1016/j.actamat.2017.08.048 ↗
16. Balanced strength and ductility in CNT/Al composites achieved by flake powder metallurgy via shift-speed ball milling10.1016/j.compositesa.2017.02.017 ↗
17. On elastic modulus and biaxial initial yield surface of carbon nanotube-reinforced aluminum nanocomposites10.1016/j.mechmat.2016.07.008 ↗
18. Molecular dynamics studies of CNT-reinforced aluminum composites under uniaxial tensile loading10.1016/j.compositesb.2015.12.031 ↗
19. Effective elastoplastic properties of carbon nanotube-reinforced aluminum nanocomposites considering the residual stresses10.1016/j.jallcom.2018.04.168 ↗
20. An analysis of the factors affecting strengthening in carbon nanotube reinforced aluminum composites10.1016/j.carbon.2010.09.054 ↗
21. Micromechanical analysis of elastic modulus of carbon nanotube-aluminum nanocomposites with random microstructures10.1016/j.jallcom.2018.11.326 ↗
22. Mechanical properties and microstructures of carbon nanotube-reinforced Al matrix composite fabricated by in situ chemical vapor deposition10.1016/j.jallcom.2009.07.099 ↗
23. Balanced strength and ductility in CNT/Al composites achieved by flake powder metallurgy via shift-speed ball milling10.1016/j.compositesa.2017.02.017 ↗
24. Strengthening behavior of chopped multi-walled carbon nanotube reinforced aluminum matrix composites10.1016/j.matchar.2013.05.018 ↗
25. Synergistic effect of CNTs reinforcement and precipitation hardening in in-situ CNTs/Al–Cu composites10.1016/j.msea.2015.03.007 ↗
26. Ceramic matrix composites containing carbon nanotubes10.1007/s10853-009-3262-9 ↗
27. Effect of milling time and CNT concentration on hardness of CNT/Al2024 composites produced by mechanical alloying10.1016/j.matchar.2012.09.005 ↗
28. Review of metal matrix composites with high thermal conductivity for thermal management applications10.1016/S1002-0071(12)60029-X ↗
29. Thermal expansion anisotropy in extruded SiC particle reinforced 2080 aluminum alloy matrix composites10.1016/j.msea.2006.04.054 ↗
30. Fabrication and thermal evaluation of carbon nanotube/aluminium composite by spark plasma sintering method10.2497/jjspm.53.965 ↗
31. Thermal properties of carbon nanotube-copper composites for thermal management applications10.1007/s11671-010-9577-2 ↗
32. Fabrication and effective thermal conductivity of multi-walled carbon nanotubes reinforced Cu matrix composites for heat sink applications10.1016/j.compscitech.2009.10.021 ↗
33. Thermal conductivity of carbon nanotube reinforced aluminum composites: a multi-scale study using object oriented finite element method10.1016/j.commatsci.2010.08.034 ↗
34. Effective thermal conductivity of particulate composites with interfacial thermal resistance10.1063/1.365209 ↗
35. Interface effect on thermal conductivity of carbon nanotube composites10.1063/1.1808874 ↗
36. Single wall carbon nanotube/polyethylene nanocomposites: thermal and electrical conductivity10.1021/ma0615046 ↗
37. Colloidal metal particles as probes of nanoscale thermal transport in fluids10.1103/PhysRevB.66.224301 ↗
38. Interfacial heat flow in carbon nanotube suspensions10.1038/nmat996 ↗
39. Inverse problem for composites with imperfect interface: determination of interfacial thermal resistance, thermal conductivity of constituents, and microstructural parameters10.1111/j.1151-2916.2000.tb01284.x ↗
40. Aboudi · 2012
41. Thermomechanical investigation of unidirectional carbon fiber-polymer hybrid composites containing CNTs
42. The effect of nanotubes waviness on mechanical properties of CNT/SMP composites10.1016/j.compscitech.2013.07.012 ↗
43. Coefficients of thermal expansion of carbon nanotube-reinforced polyimide nanocomposites: a micromechanical analysis
44. Effects of CNT waviness on the effective elastic responses of CNT-reinforced polymer composites10.1007/s00707-013-0808-3 ↗
45. Thermal conductivity of carbon nanotube-silver composite10.1016/S1003-6326(15)63590-7 ↗
46. Future trends in materials for lightweight microwave packaging10.1108/13565369810233104 ↗
47. Mechanical properties of silver matrix composites reinforced with ceramic particles