Revealing abnormal {112¯1} twins in commercial purity Ti subjected to split Hopkinson pressure bar
Source abstract
Abstract
The deformation behavior of Ti alloys during conventional deformation, such as rolling and compression, have been extensively investigated, while it is less understood during high strain rate deformation. In the present work, a commercial purity (CP) Ti alloy was subjected to high strain rate (∼600 s −1 ) compression deformation using a split Hopkinson pressure bar (SHPB) system. By multi-impacts, an accumulative deformation strain of ∼0.15 was achieved. The microstructural evolution has been systematically analyzed by electron backscatter diffraction (EBSD). It is found that the CP-Ti alloy has been deformed predominantly by three different twinning modes, {10 1 ¯ 2} (T1), {11 2 ¯ 1} (T2) and {11 2 ¯ 2} (C1). A large fraction of the {11 2 ¯ 1} (T2) twin boundary (TB) segments are found to be in connection with deformation band (DB) boundary segments with misorientation angles much lower than the theoretical value of the {11 2 ¯ 1} (T2) TB, ∼35°. Based on the analysis of the crystallographic nature of these abnormal {11 2 ¯ 1} (T2) TBs and the calculation of Schmid factor, it is suggested that these abnormal {11 2 ¯ 1} (T2) TBs are evolved from DB boundaries through the accumulative slip of single basal-〈a〉 dislocations, namely a kinking mechanism. This special twinning mode of the {11 2 ¯ 1} (T2) twin has been attributed to the high strain rate deformation during SHPB compression, which is helpful for understanding the deformation and twinning behavior during high strain rate deformation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and mechanical properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Structural refinement and deformation mechanisms in nanostructured metals10.1016/j.scriptamat.2009.02.027 ↗
2. Formation of Σ3{110} incoherent twin boundaries through geometrically necessary boundaries in an Al-8Zn alloy subjected to one pass of equal channel angular pressing10.1016/j.jallcom.2018.05.168 ↗
3. Role of twinning in texture development and in plastic deformation of hexagonal materials10.1155/TSM.7.265 ↗
4. XCIII. The development of deformation textures in metals.—Part III. Hexagonal structures10.1080/14786445108561320 ↗
5. Effect of deformation twinning on microstructure and texture evolution during cold rolling of CP-titanium10.1016/j.msea.2005.03.019 ↗
6. The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials10.1016/j.pmatsci.2017.10.004 ↗
7. Slip, twinning, and fracture in hexagonal close-packed metals10.1007/BF02648537 ↗
8. Twinning and the ductility of magnesium alloys10.1016/j.msea.2006.12.037 ↗
9. Relationship between deformation twinning and the stress-strain behavior of polycrystalline titanium and zirconium at 77 K10.1007/BF02669391 ↗
10. The interaction between slip and twinning systems and the influence of twinning on the mechanical behavior of fcc metals and alloys10.1007/BF02648536 ↗
11. Strain hardening of titanium: role of deformation twinning10.1016/S1359-6454(03)00239-8 ↗
12. Role of twinning in the hardening response of zirconium during temperature reloads10.1016/j.actamat.2006.02.036 ↗
13. The importance of mechanical twinning in the stress-strain behavior of swaged high purity fine-grained titanium below 424°K10.1007/BF02813267 ↗
14. Superplastic extensibility of nanocrystalline copper at room temperature10.1126/science.287.5457.1463 ↗
15. Ultrahigh strength and high electrical conductivity in copper10.1126/science.1092905 ↗
16. Strengthening materials by engineering coherent internal boundaries at the nanoscale10.1126/science.1159610 ↗
17. Quantitative analysis of grain refinement in titanium during equal channel angular pressing10.1016/j.scriptamat.2011.01.030 ↗
18. Microstructure evolution of commercial pure titanium during equal channel angular pressing10.1016/j.msea.2009.09.005 ↗
19. Faceted interfacial structure of {10-11} twins in Ti formed during equal channel angular pressing10.1016/j.scriptamat.2009.11.039 ↗
20. Strain hardening due to deformation twinning in α-titanium: constitutive relations and crystal-plasticity modeling10.1016/j.actamat.2005.04.014 ↗
21. Deformation twinning and the Hall–Petch relation in commercial purity Ti10.1007/s11661-007-9442-9 ↗
22. Misorientations induced by deformation twinning in titanium10.1107/S0021889810008228 ↗
23. Study of {11-21} twinning in α-Ti by EBSD and laue microdiffraction10.1007/s11661-013-1714-y ↗
24. Plastic deformation of titanium at elevated temperatures10.1007/BF03037822 ↗
25. The effects of deformation conditions on microstructure and texture of commercially pure Ti10.1016/j.actamat.2009.08.016 ↗
26. Deformation twinning10.1016/0079-6425(94)00007-7 ↗
27. Quantifying the grain boundary segregation strengthening induced by post-ECAP aging in an Al-5Cu alloy10.1016/j.actamat.2018.05.075 ↗
28. The deformation and work hardening behaviour of a SPD processed Al-5Cu alloy10.1016/j.jallcom.2016.11.353 ↗
29. Soft particles assisted grain refinement and strengthening of an Al-Bi-Zn alloy subjected to ECAP10.1016/j.msea.2017.07.064 ↗
30. Effect of soft Bi particles on grain refinement during severe plastic deformation10.1016/S1003-6326(17)60114-6 ↗
31. Grain refinement of magnesium alloys processed by severe plastic deformation10.1016/S1003-6326(14)63528-7 ↗
32. The high-strain-rate response of alpha-titanium: experiments, deformation mechanisms and modeling10.1016/S1359-6454(97)00287-5 ↗
33. A model for experimentally-observed high-strain-rate dynamic strain aging in titanium10.1016/S1359-6454(00)00124-5 ↗
34. Experimental study on the dynamic tensile behavior of a poly-crystal pure titanium at elevated temperatures10.1016/j.msea.2006.06.041 ↗
35. {11-24} deformation twinning in commercial purity titanium at room temperature10.1080/14786435.2015.1051157 ↗
36. Formation of {11-21} twin boundaries in titanium by kinking mechanism through accumulative dislocation slip10.1016/j.actamat.2016.08.042 ↗
37. Effects of strain rates on deformation twinning behavior in α-titanium10.1016/j.matchar.2015.05.016 ↗
38. {11-24} deformation twinning in pure Ti during dynamic plastic deformation10.1016/j.msea.2012.02.021 ↗
39. Characterization and modeling of mechanical behavior of polymer/clay nanocomposites10.1016/S0266-3538(03)00060-5 ↗
40. Deformation behavior and plastic instabilities of ultrafine-grained titanium10.1063/1.1384000 ↗
41. Effect of twinning on microstructure and texture evolutions of pure Ti during dynamic plastic deformation10.1016/j.msea.2012.11.097 ↗
42. Deformation behaviour of commercially pure titanium at extreme strain rates10.1016/j.actamat.2011.02.018 ↗
43. The onset of twinning in metals: a constitutive description10.1016/S1359-6454(01)00300-7 ↗
44. Twinning effects in a rod-textured AM30 Magnesium alloy10.1016/j.ijplas.2011.08.001 ↗
45. Single and double twin nucleation, growth, and interaction in an extruded magnesium alloy10.1016/j.matdes.2017.01.072 ↗
46. Experimental characterization and crystal plasticity modeling of heterogeneous deformation in polycrystalline α-Ti10.1007/s11661-010-0249-8 ↗
47. Novel deformation structures of pure titanium induced by room temperature equal channel angular pressing10.1016/j.matlet.2013.11.111 ↗
48. First-principles study of dislocations in hcp metals through the investigation of the (11-21) twin boundary10.1103/PhysRevB.84.184101 ↗
49. Structure and nature of kink bands in zinc
50. Crystallographic nature of deformation bands shown in Zn and Mg-based long-period stacking ordered (LPSO) phase10.1080/14786435.2014.987843 ↗
51. The crystallography of deformation kinking10.1080/00318087608225776 ↗
52. Anisotropy in the plastic flow properties of single-crystal α titanium determined from micro-cantilever beams10.1016/j.actamat.2009.07.064 ↗
53. The slip modes of titanium and the effect of purity on their occurrence during tensile deformation of single crystals10.1098/rspa.1954.0250 ↗
54. Microstructure development during equal-channel angular pressing of titanium10.1016/S1359-6454(02)00501-3 ↗
55. Sensitivity of deformation twinning to grain size in titanium and magnesium10.1016/j.actamat.2011.09.018 ↗