Effects of soft phase on the mechanical behaviors of hierarchical Mg nanocomposites
Source abstract
Abstract
Abstract The magnesium matrix nanocomposites (10 vol% and 15 vol% of SiC particles) with a hierarchical structure, which contained flake-like soft phases, were investigated by compression and modeling. Fortunately, the unique malleability of hierarchical Mg nanocomposites was observed. The fracture surfaces indicated that the hierarchical Mg nanocomposites demonstrated ductile rupture. The “pull-out” phenomenon on the fracture surfaces suggested that the flake-like soft phase could sustain the additional deformation, consequently improving the malleability of Mg nanocomposites. Additionally, the modeling demonstrated that the effects from soft phase were not negligible, where the modified model exhibited a better agreement on the yield strength of the hierarchical Mg nanocomposites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Light weight materials for automotive applications10.1016/1044-5803(95)00063-1 ↗
2. Advanced metals for aerospace and automotive use10.1016/0921-5093(94)91026-X ↗
3. Enhanced deformation mechanisms by anisotropic plasticity in polycrystalline Mg alloys at room temperature10.1007/s11661-005-0032-4 ↗
4. The origins of high hardening and low ductility in magnesium10.1038/nature15364 ↗
5. Deformation behavior of magnesium in the grain size spectrum from nano- to micrometer10.1016/j.msea.2009.10.035 ↗
6. What is going on in magnesium alloys?10.1016/j.jmst.2017.07.019 ↗
7. Synthesis and characterization of nano boron nitride reinforced magnesium composites produced by the microwave sintering method10.3390/ma6051940 ↗
8. Particle reinforced aluminum and magnesium matrix composites10.1179/imr.1994.39.1.1 ↗
9. Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles10.1038/nature16445 ↗
10. Dry sliding wear behavior of Mg-SiC nanocomposites with high volume fractions of reinforcement10.1016/j.matlet.2018.05.114 ↗
11. Metal matrix composites reinforced by nano-particles—a review10.3390/met4010065 ↗
12. Magnesium-based nanocomposites: lightweight materials of the future10.1016/j.matchar.2015.04.015 ↗
13. Mechanically alloyed nanocomposites10.1016/j.pmatsci.2012.10.001 ↗
14. The conflicts between strength and toughness10.1038/nmat3115 ↗
15. Processing, microstructure and mechanical properties of micro-SiC particles reinforced magnesium matrix composites fabricated by stir casting assisted by ultrasonic treatment processing10.1016/j.matdes.2014.01.022 ↗
16. Microstructure and tensile properties of micro-SiC particles reinforced magnesium matrix composites produced by semisolid stirring assisted ultrasonic vibration10.1016/j.msea.2011.08.035 ↗
17. Effect of submicron size SiC particulates on microstructure and mechanical properties of AZ91 magnesium matrix composites10.1016/j.jallcom.2010.05.159 ↗
18. Magnesium strengthened by SiC nanoparticles10.1016/S0921-5093(00)01283-1 ↗
19. Mechanical properties and microstructure of SiC-reinforced Mg-(2,4)A1-1Si nanocomposites fabricated by ultrasonic cavitation based solidification processing10.1016/j.msea.2007.09.054 ↗
20. Effect of ceramic nanoparticle reinforcements o. The quasistatic and dynamic mechanical properties of magnesium-based metal matrix composites10.1557/jmr.2013.16 ↗
21. Magnesium nanocomposites reinforced with a high volume fraction of SiC particulates10.3139/146.111546 ↗
22. Bioinspired structural materials10.1038/nmat4089 ↗
23. High performance heterogeneous magnesium-based nanocomposite10.1016/j.matlet.2014.12.099 ↗
24. The mechanical behavior of hierarchical Mg matrix nanocomposite with high volume fraction reinforcement10.1016/j.msea.2017.05.067 ↗
25. Effect of special microstructure on the mechanical properties of nanocomposite10.1016/j.msea.2007.10.072 ↗
26. A unified model for the prediction of yield strength in particulate-reinforced metal matrix nanocomposites10.3390/ma8085138 ↗
27. Enhanced properties of Mg-based nano-composites reinforced with Al2O3 nano-particles10.1016/j.msea.2009.05.001 ↗
28. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
29. The cleavage strength of polycrystals
30. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
31. Mg–6Zn/1.5%SiC nanocomposites fabricated by ultrasonic cavitation-based solidification processing10.1007/s10853-008-2785-9 ↗
32. Mechanical properties and microstructure of Mg/SiC nanocomposites fabricated by ultrasonic cavitation based nanomanufacturing
33. Enhanced performance of nano-sized SiC reinforced Al metal matrix nanocomposites synthesized through microwave sintering and hot extrusion techniques
34. Microstructure evolution and mechanical properties of Mg matrix composites reinforced with Al and nano SiC particles using spark plasma sintering followed by hot extrusion10.1016/j.jallcom.2017.07.159 ↗
35. Toughening of aluminum matrix nanocomposites via spatial arrays of boron carbide spherical nanoparticles10.1016/j.actamat.2015.09.057 ↗
36. An analytical study on strengthening of particulate reinforced metal matrix composites10.1016/1359-6454(95)00150-9 ↗
37. A generalized law of mixtures10.1007/BF00356585 ↗
38. Fe-Cu two-phase nanocomposites: application of a modified rule of mixtures10.1016/S1359-6462(99)00300-0 ↗
39. Nanomechanical modeling of the nanostructures and dispersed composites10.1016/j.commatsci.2003.08.010 ↗
40. Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: a model for predicting their yield strength10.1016/j.scriptamat.2005.12.017 ↗
41. A model for predicting the particle size dependence of the low cycle fatigue life in discontinuously reinforced MMCs10.1016/j.scriptamat.2004.07.006 ↗
42. The effect of grain size and strain on the tensile flow stress of copper at room temperature10.1016/0001-6160(77)90171-7 ↗
43. Taya · 1989
44. Strengthening of composites due to microstructural changes in the matrix10.1016/0956-7151(91)90327-W ↗
45. Direct versus indirect dispersion hardening10.1016/0956-716X(92)90368-O ↗
46. A numerical study of effect of grain boundaries on elastic and plastic properties in nanocomposite materials
47. Deformation mechanism in high strength Cu/Nb nanocomposites10.1016/S0921-5093(00)01661-0 ↗
48. Dieter · 2011 · 212
49. The influence of particle size and particle fracture on the elastic/plastic deformation of metal matrix composites10.1016/1359-6454(96)00008-0 ↗
50. Mechanical properties and microstructure of cast oxide-dispersion-strengthened aluminum10.1016/0921-5093(94)09741-0 ↗
51. On plastic relaxation of thermal stresses in reinforced metals10.1016/0956-7151(91)90261-X ↗