The effect of the ternary elements B, Ti, Cr, Cu, and Mo on fully lamellar FeAl + FeAl2 alloys
Source abstract
Abstract
Abstract Binary Fe-Al alloys in the composition range of 53–65 at.% Al contain finely lamellar microstructures formed of the intermetallic phases FeAl and FeAl 2 as a result of a rapid eutectoid decomposition reaction on cooling. Here, we study the effect of ternary additions of up to 2 at.% B, Ti, Cr, Cu and Mo on a fully lamellar alloy with respect to the resulting microstructures, crystal structures of the phases, thermal stability, and mechanical properties. The ternary alloys containing B or Cu preserve the fully lamellar microstructure while those with additions of Mo and Ti show formation of third, ternary phases (Al 8 FeMo 3 and Al 2 FeTi, respectively). Melting temperatures as well as the formation temperatures of the lamellar microstructure are either unaffected or decrease by the ternary additions compared to the binary case. The hardness of the FeAl phase is much more affected by the ternary additions than that of the FeAl 2 phase. The brittle-to-ductile transition temperatures and the yield stresses were studied for all ternary alloys and compared to the binary case, for which also the effect of variations in the Al content was investigated. Especially in case of B additions, an unexpected increase in the brittle-to-ductile transition temperature was observed. Atom probe tomographic experiments reveal that B does not segregate at the phase boundaries but instead forms fine boride particles inside the FeAl lamellae.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced Materials Characterization Techniques · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. A review of recent developments in Fe3Al-based alloys10.1557/JMR.1991.1779 ↗
2. Mechanical properties of FeAl10.1179/imr.1997.42.5.181 ↗
3. Recent advances in B2 iron aluminide alloys: deformation, fracture and alloy design10.1016/S0921-5093(98)00921-6 ↗
4. Iron aluminides - present status and future prospects10.1016/S0921-5093(98)00909-5 ↗
5. Concepts derived from phase diagram studies for the strengthening of Fe-Al-based alloys10.1016/j.intermet.2004.10.015 ↗
6. Fe-Al materials for structural applications at high temperatures: current research at MPIE10.3139/146.110056 ↗
7. Recent developments toward the application of iron aluminides in fossil fuel technologies10.1002/adem.201000210 ↗
8. Effect of boron on the tensile properties of B2 FeAl10.1016/0025-5416(86)90323-X ↗
9. Tensile ductility, slow crack growth, and fracture mode of ternary B2 iron aluminides at room temperature10.1016/S0966-9795(96)00087-8 ↗
10. Room-temperature mechanical behavior of FeAl: effects of stoichiometry, environment, and boron addition10.1016/S1359-6454(98)00254-7 ↗
11. The room-temperature strengthening effect of boron as a function of aluminum concentration in FeAl10.1016/S0966-9795(97)00063-0 ↗
12. On the boron effect in FeAl (B2) intermetallic alloys10.1016/S0921-5093(98)00923-X ↗
13. Influence of boron on the mechanical-properties of B2-ordered FeAl alloys10.2320/matertrans1989.41.166 ↗
14. Atomic-scale investigation of boron nanosegregation in FeAl intermetallics10.1016/S1359-6462(99)00106-2 ↗
15. Microstructure and phase transformation temperatures of two-phase FeAl (B2) + FeAl2 alloys
16. The Al-rich part of the Fe-Al phase diagram10.1007/s11669-015-0446-7 ↗
17. Determination of the crystal structure of the ε phase in the Fe-Al system by high-temperature neutron diffraction10.1016/j.intermet.2009.07.006 ↗
18. Effects of microstructure on the deformation and fracture of γ-TiAl alloys10.1016/0921-5093(94)03271-8 ↗
19. Development of ultrafine lamellar structures in two-phase γ-TiAl alloys10.1007/s11661-998-0163-5 ↗
20. Influence of heating rate in α + γ dual phase field on lamellar morphology and creep property of fully lamellar Ti–48Al alloy10.1016/j.msea.2005.02.055 ↗
21. In situ site-specific specimen preparation for atom probe tomography10.1016/j.ultramic.2006.06.008 ↗
22. Orientation relationship of eutectoid FeAl and FeAl210.1107/S1600576716000911 ↗
23. Coarsening kinetics of lamellar microstructures: experimental and simulations on a fully-lamellar Fe-Al in situ composite10.1016/j.actamat.2017.01.041 ↗
24. Phase equilibria in the Fe-Al-Mo system-Part I: stability of the Laves phase Fe2Mo and isothermal section at 800 °C10.1016/j.intermet.2008.02.006 ↗
25. Phase equilibria in the Fe-Al-Mo system - Part II: isothermal sections at 1000 and 1150°C10.1016/j.intermet.2008.04.001 ↗
26. Phase equilibria in the ternary systems Ti-Fe-O and Ti-Al-Fe
27. The Fe-Al-Ti system10.1007/BF02667305 ↗
28. Dependence of the brittle-to-ductile transition temperature (BDTT) on the Al content of Fe-Al alloys10.1016/j.intermet.2005.02.007 ↗
29. A new tetragonal boride phase in FeAl+B type alloys10.1557/PROC-460-331 ↗
30. Precipitation in an extruded Fe-40 at.% Al-0.5 at.% B-0.7 at.% C alloy10.1080/095008397178922 ↗
31. Fe16Al14B2 phase in Fe-Al alloys10.1080/01418610008216502 ↗
32. Flow stress anomaly and order-disorder transitions in Fe3Al-based Fe-Al-Ti-X alloys with X=V, Cr, Nb, or Mo10.1016/S0966-9795(02)00187-5 ↗