journal article·2025-01

Annealing treatment's impact on the microstructure and mechanical properties of HVOF-sprayed high-entropy alloy coatings with AlxCoCrFeNi composition (x = 0.4, 0.7, 1.0)

Yong-kuan Zhou, Jia-jie Kang, Guo-zheng Ma, Li-na Zhu, Qiang Da, Bin Liu, Rui-feng Li

Publisher page

Abstract

In this study, the High Velocity Oxygen Fuel (HVOF) technology was utilized to fabricate HEA coatings composed of Al xCoCrFeNi (x = 0.4, 0.7, 1.0), followed by subsequent vacuum annealing conducted at temperatures spanning 500, 700, 900, and 1100 ℃. The microstructure, phase compositions and mechanical properties of HVOF-sprayed Al xCoCrFeNi HEA coatings before and after vacuum annealing were analyzed. Our findings indicate that the HVOF-sprayed Al xCoCrFeNi HEA coatings demonstrate a single solid solution phase (either FCC or BCC). As the Al content rises, the phase structure of the HEA coating shifts from FCC to BCC, resulting in increased hardness, H/E ratio, and H 3/E 2 ratio. After undergoing vacuum annealing at 500℃, the Al xCoCrFeNi HEA coatings retain the identical microstructure and phase composition as the as-sprayed state. With increasing annealing temperature, the BCC phase to FCC phase transformation occurs and the microstructure coarsens. After vacuum annealing at 500℃, the hardness, H/E and H 3/E 2 values of the coatings are most significantly enhanced due to the grain boundary dislocation source strengthening. At 700 and 900℃, the mechanical properties of the coatings are also improved as a result of the existence of the σ phase. However, at 1100℃, the mechanical properties of the coatings decline due to phase transformation and grain coarsen. This indicates that HVOF technology and appropriate annealing process may be a new strategy for designing high-performance HEA coatings, which has potential applications in aerospace, geological drilling, marine ships and other fields.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Transmission electron microscopy characterization of dislocation structure in a face-centered cubic high-entropy alloy Al0.1CoCrFeNi10.1016/j.actamat.2017.10.050 ↗
2. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
3. Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys10.1016/j.intermet.2012.03.005 ↗
4. The sliding wear behaviour of CoCrFeMnNi and AlxCoCrFeNi high entropy alloys at elevated temperatures10.1016/j.wear.2019.03.002 ↗
5. Microstructure and mechanical property of as-cast, -homogenized, and -deformed AlxCoCrFeNi (0≤x≤2) high-entropy alloys10.1016/j.jallcom.2009.08.090 ↗
6. Influence of Al and Cu elements on the microstructure and properties of (FeCrNiCo)AlxCuy high-entropy alloys10.1016/j.jallcom.2014.06.090 ↗
7. Effect of Al content on structure and mechanical properties of the AlxCrNbTiVZr (x=0; 0.25; 0.5; 1) high-entropy alloys10.1016/j.matchar.2016.09.039 ↗
8. Effect of annealing treatment on microstructures and mechanical properties of FeCoNiCuAl high entropy alloys10.1016/j.msea.2013.01.081 ↗
9. Developing novel ultra-thin refractory medium-entropy foils with excellent strength-ductility synergy
10. Mechanical properties improvement of AlCrFeNi2Ti0.5 high entropy alloy through annealing design and its relationship with its particle-reinforced microstructures10.1016/j.jmst.2014.09.011 ↗
11. Strengthening of nanoprecipitations in an annealed Al0.5CoCrFeNi high entropy alloy10.1016/j.msea.2016.06.040 ↗
12. Microstructural characterization and mechanical properties of an Al0.5CoCrFeCuNi high-entropy alloy in as-cast and heat-treated/quenched conditions10.1016/j.msea.2013.01.006 ↗
13. Effects of annealing on microstructure, mechanical and electrical properties of AlCrCuFeMnTi high entropy alloy10.1007/s11595-013-0844-9 ↗
14. Corrosion behavior of AlCrVTi light-weight high-entropy alloy coating in different corrosion environments10.1007/s44251-023-00020-7 ↗
15. Tailoring microstructure and corrosion behavior of CoNiCrFeMoBSi high-entropy alloy coatings via Mo addition10.1016/j.surfcoat.2024.131129 ↗
16. Microstructure and wear resistance of CoCrNbNiW high-entropy alloy coating prepared by laser melting deposition10.1007/s12598-019-01342-y ↗
17. Microstructure and wear behaviour of AlCoCrFeNi-coated SS316L by atmospheric plasma spray process10.1080/14686996.2024.2341611 ↗
18. Nano- and micro-mechanical properties and corrosion performance of a HVOF sprayed AlCoCrFeNi high-entropy alloy coating10.1016/j.jallcom.2022.165000 ↗
19. Influence of annealing on microstructure and cavitation erosion resistance of iron-based metallic glass coatings synthesized by HVOF thermal spraying10.1016/j.intermet.2023.107970 ↗
20. Niobium and molybdenum as alloying constituents in Al0.3CoCrFeNi to develop eutectic high-entropy alloys for HVOF spraying10.1007/s11666-022-01417-w ↗
21. Microstructure and wear resistance of AlCoCrFeNiTi high-entropy alloy coatings produced by HVOF10.3390/coatings7090144 ↗
22. Nano oxides reinforced high-entropy alloy coatings synthesized by atmospheric plasma spraying10.1080/21663831.2019.1604443 ↗
23. Cold spray additive manufacturing of CoCrFeNiMn high-entropy alloy: process development, microstructure, and mechanical properties10.1007/s11666-022-01374-4 ↗
24. The comparative study of the microstructural and corrosion behaviour of laser-deposited high entropy alloys10.1016/j.jallcom.2021.158777 ↗
25. Deposition of FeCoNiCrMn high entropy alloy (HEA) coating via cold spraying10.1016/j.jmst.2018.12.015 ↗
26. Microstructure, multi-scale mechanical and tribological performance of HVAF sprayed AlCoCrFeNi high-entropy alloy coating10.1016/j.jallcom.2024.175962 ↗
27. Microstructure and magnetic properties evolution of Al/CoCrFeNi nanocrystalline high-entropy alloy composite10.1007/s12598-021-01931-w ↗
28. Effect of Fe on microstructure and properties of AlCoCrFexNi (x=1.5, 2.5) high entropy alloy coatings prepared by laser cladding10.1016/j.intermet.2020.106722 ↗
29. Wear behavior of HVOF-sprayed Al0.6TiCrFeCoNi high entropy alloy coatings at different temperatures10.1016/j.surfcoat.2018.11.052 ↗
30. Frictional wear and corrosion behavior of AlCoCrFeNi high-entropy alloy coatings synthesized by atmospheric plasma spraying10.3390/e22070740 ↗
31. Research on the construction of gradient nanostructure and anti-tribocorrosion behavior of aluminum alloy surface
32. Mapping hierarchical and heterogeneous micromechanics of a transformative high entropy alloy by nanoindentation and machine learning augmented clustering10.1016/j.matdes.2023.111957 ↗
33. Effect of cooling rate on the phase formation of AlCoCrFeNi high-entropy alloy10.1007/s11669-021-00918-5 ↗
34. Microstructure and strengthening mechanisms in FCC-structured single-phase TiC-CoCrFeCuNiAl0.3 HEACs with deformation twinning10.1016/j.msea.2021.141215 ↗
35. Effects of nanotwins on the mechanical properties of AlxCoCrFeNi high entropy alloy thin films10.1016/j.scriptamat.2017.06.009 ↗
36. Microstructure and wear behavior of FeCoNiCrMn high entropy alloy coating deposited by plasma spraying10.1016/j.surfcoat.2020.125430 ↗
37. Improved tribological performance and enhanced tensile adhesive strength of micro- to near-nanocrystalline WC-17 wt%Co coatings sprayed using HVOF10.1016/j.ceramint.2024.01.064 ↗
38. A systematic investigation of the tribological behaviour of oxides formed on AlSiTiN, CrAlTiN, and CrAlSiTiN coatings10.1016/j.wear.2022.204552 ↗
39. Effect of B/Si ratio on structure and properties of high-entropy glassy Fe25Co25Ni25(BxSi1-x)25 coating prepared by laser cladding10.1016/j.surfcoat.2020.126320 ↗
40. W Microstructure and thermal stability of Ni-Cr-Co-Ti-V-Al high-entropy alloy coating by laser surface alloying10.1007/s12540-017-6583-2 ↗
41. Effect of annealing treatment on the microstructure and hardness of AlxCoCrFeNi (x =0.75, 1.25) high entropy alloys10.1007/s11665-021-06240-y ↗
42. Microstructure evolution and mechanical properties of atmosphere plasma sprayed AlCoCrFeNi high-entropy alloy coatings under post-annealing10.1016/j.jallcom.2021.159607 ↗
43. Heat treatment impacts the micro-structure and mechanical properties of AlCoCrFeNi high entropy alloy10.1016/j.jallcom.2016.05.034 ↗
44. Secondary phases in AlxCoCrFeNi high-entropy alloys: an in-situ TEM heating study and thermodynamic appraisal10.1016/j.actamat.2017.03.066 ↗
45. Effect of annealing treatment on the microstructure and hardness of AlxCoCrFeNi (x = 0.75, 1.25) high entropy alloys10.1007/s11665-021-06240-y ↗
46. Heat treatment impacts the micro-structure and mechanical properties of AlCoCrFeNi high entropy alloy10.1016/j.jallcom.2016.05.034 ↗
47. Effect of heat treatment on the phase evolution and mechanical properties of atomized AlCoCrFeNi high-entropy alloy powders10.1016/j.jallcom.2019.06.301 ↗
48. A superior combination of strength-ductility in CoCrFeNiMn high-entropy alloy induced by asymmetric rolling and subsequent annealing treatment10.1016/j.matchar.2018.09.029 ↗
49. Regulating the strength and ductility of a cold rolled FeCrCoMnNi high-entropy alloy via annealing treatment10.1016/j.msea.2019.04.025 ↗
50. L12-strengthened Co-rich alloys for high-temperature structural applications: a critical review10.1002/adem.202100453 ↗
51. Hardening by annealing and softening by deformation in nanostructured metals10.1126/science.1124268 ↗
52. Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed10.1016/j.actamat.2009.05.017 ↗
53. Annealing-induced hardening in high-pressure torsion processed CoCrNi medium entropy alloy10.1016/j.msea.2018.07.107 ↗