Microstructure observation of T-phase in Al-Zn-Mg alloy with low Zn/Mg ratio
Source abstract
Abstract
For the first time, this study clarifies the interface of the T’’, T’, and T-phase in Al-Zn-Mg alloy with a low Zn/Mg ratio and evaluates the shape of the precipitate morphology according to different zone directions of the Al matrix. The orientation relationship, shape, misfit, and interfacial conditions between the T’’, T’, and T-phase and the Al matrix were investigated using high-resolution transmission electron microscopy (HR-TEM). We differentiated the T’’ ( a =1.387 nm), T’ ( a =1.422 nm), and T ( a =1.456 nm) phase by calculating the lattice parameters in HR-TEM images. We also identified the T’’, T’, and T-phase by diffraction patterns along the <100>, <110>, <111>, and <112> zone directions of the Al matrix. Additionally, we introduce the different orientation relationships of the T-phase with the Al matrix, The [ 11 ¯ 0 ] zone direction of the Al is parallel to the [ 3 ¯ 20 ] direction of the T-phase, and the plane of ( 11 ¯ 1 ) of the Al is parallel to the plane of ( 11 2 ̅ ) of the T-phase. Among Al alloys, the 7xxx series is known for its superior strength due to the co-precipitation of the η and T-phase. While previous research has extensively examined the precipitation sequence, composition, atomic structure, and phase transformation mechanisms of the η-phase, the T-phase has received less attention. Our observations provide insight into the behavior of T-phase crystals, which is crucial for understanding the microstructural evolution of Al-Zn-Mg alloys and for designing materials with desired properties. • This study is the first to clarify the interface of the T′′, T′, and T-phase in Al-Zn-Mg alloy with a low Zn/Mg ratio, distinguishing them through precise lattice parameter measurements in HR-TEM images. • The shape and morphology of T-phase precipitates were evaluated across various zone directions of the Al matrix. • Different orientation relationships between T′′, T′, and T-phases and the Al matrix were identified, providing insights into microstructural evolution. • The lattice parameters for T′′ (1.387 nm), T'T′ (1.422 nm), and T-phase (1.456 nm) were calculated and distinguished using high-resolution transmission electron microscopy (HR-TEM). • T′′, T′, and T-phases were also identified through diffraction patterns along the <100>, <110>, <111>, and <112> zone directions of the Al matrix.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Polmear · 1995
2. 1961 review of metal processing literature, ASME10.1115/1.3667605 ↗
3. The effect of pre-ageing/stretching on the ageing-hardening behavior of Al–Zn–Mg–Cu alloys correlated with Zn/Mg ratio10.1016/j.msea.2021.142331 ↗
4. Characterization of precipitates in an aged 7xxx series Al alloy10.1002/sia.1702 ↗
5. Enhanced and accelerated age hardening response of Al-5.2Mg-0.45Cu (wt%) alloy with Zn addition10.1016/j.msea.2016.04.022 ↗
6. Improved age-hardening response and altered precipitation behavior of Al-5.2Mg-0.45Cu-2.0Zn (wt%) alloy with pre-aging treatment10.1016/j.jallcom.2016.08.206 ↗
7. Precipitation hardening behavior and microstructure evolution of Al-5.1 Mg-0.15Cu alloy with 3.0Zn (wt%) addition, J. Mater. Sci
8. Solute clustering and precipitation of Al-5.1Mg-0.15Cu-xZn alloy10.1016/j.msea.2019.05.066 ↗
9. The metastable T′ phase in Al-Zn-Mg and Al-Ag-Mg alloys10.1179/030634576790431813 ↗
10. Microstructure and strength of a novel heat-resistant aluminum alloy strengthened by T-Al6Mg11Zn11 phase at elevated temperatures10.1016/j.msea.2018.10.034 ↗
11. Fine scale precipitates in Al-Mg-Zn alloys after various aging temperatures
12. The effects of a trace addition of silver upon elevated temperature ageing of an Al-Zn-Mg alloy, Micr
13. Effect of final thermomechanical treatment on the mechanical properties and microstructure of T phase hardened Al-5.8 Mg-4.5 Zn-0.5 Cu alloy10.3390/ma16083062 ↗
14. Age-hardening of high pressure die casting AlMg alloys with Zn and combined Zn and Cu additions
15. The crystal structure of the metallic phase Mg32(Al,Zn)4910.1107/S0365110X57000808 ↗
16. Decomposition processes in Al-Zn-Mg alloys10.1007/BF00541825 ↗
17. The mechanism of nucleation and precipitation in 7075-0.7 Li alloy10.1016/0956-7151(94)90509-6 ↗
18. Microstructure and properties of high strength aluminium alloys for structural applications10.1007/s12666-009-0015-z ↗
19. Atomic scale imaging and analysis of T′ precipitates in Al-Mg-Zn alloys
20. Co-precipitation of T′ and η′ phase in Al-Zn-Mg-Cu alloys
21. The evolution of precipitates in an Al–Zn–Mg alloy10.1016/j.jmrt.2023.02.144 ↗
22. Influence du zinc sur la decomposition de la solution solide sursaturee Al-Zn-Mg
23. A high-strength AlZnMg alloy hardened by the T-phase precipitates10.1016/j.jallcom.2014.04.185 ↗
24. Simple equations giving shapes of various convex polyhedra: the regular polyhedra and polyhedra composed of crystallographically low-index planes10.1080/09500830600603050 ↗
25. Morphology evolution of β-phase in Al-Mg-Si alloys during aging treatment
26. Evolution of precipitate and precipitate/matrix interface in Al-Zn-Mg-Cu (-Ag) alloys10.1016/j.jmst.2022.07.049 ↗
27. Modification of the precipitate interface under irradiation and its effect on the stability of precipitates10.1016/0022-3115(79)90608-1 ↗
28. Synergy of multiple precipitate/matrix interface structures for a heat resistant high-strength Al alloy10.1038/s41467-023-38730-z ↗
29. Interface precipitation and corrosion mechanisms in a model Al–Zn–Mg–Cu alloy strengthened by TiC particles10.1016/j.corsci.2022.110533 ↗
30. Stabilizing nanostructures in metals using grain and twin boundary architectures10.1038/natrevmats.2016.19 ↗
31. Hydrogen trapping in Mg2Si and Al7FeCu2 intermetallic compounds in aluminum alloy: first-principles calculations10.2320/matertrans.MT-M2020201 ↗
32. On the crystallography of precipitation10.1016/j.pmatsci.2004.04.002 ↗
33. Faceted interfaces: a key feature to quantitative understanding of transformation morphology
34. Cu atoms suppress misfit dislocations at the β″/Al interface in Al–Mg–Si alloys10.1016/j.scriptamat.2015.07.033 ↗
35. Precipitation evolution of Al-Zn-Mg-Cu-(Ag) alloys with a low Zn/Mg ratio10.1016/j.jmst.2023.12.071 ↗
36. Interface precipitation and corrosion mechanisms in a model Al–Zn–Mg–Cu alloy strengthened by TiC particles10.1016/j.corsci.2022.110533 ↗
37. Superplasticity and mechanical properties of Al–Mg–Si alloy doped with eutectic-forming Ni and Fe, and dispersoid-forming Sc and Zr elements10.1016/j.msea.2021.141319 ↗
38. Atomic structure of hardening precipitates in Al-Mg-Si alloys: influence of minor additions of Cu and Zn10.1021/acsnano.3c09129 ↗
39. Enhanced and accelerated age hardening response of Al-5.2Mg-0.45Cu (wt%) alloy with Zn addition10.1016/j.msea.2016.04.022 ↗
40. Quantifying early-stage precipitation strengthening of Al–Mg–Zn (-Cu) alloy by using particle size distribution10.1016/j.msea.2022.142851 ↗
41. Etude par microscopie electronique de la decomposition de l′alliage Al-6,8 at% Zn10.1016/0001-6160(77)90146-8 ↗
42. On the Size–Shape Relation of Guinier-Preston Zones and α′R-Precipitates in an Al–6.8 at% Zn Alloy10.1002/pssa.2210790115 ↗
43. Small-angle neutron scattering from guinier-preston zones in Al-6.8 at% Zn single crystals10.1002/crat.2170200119 ↗
44. On the size-shape relation of guinier-preston zones grown in an Al-12 at% Zn alloy at room temperature
45. Etude, par diffusion des rayons X, de la structure interne des zones de guinier preston dans un alliage A1-6, 8% at.Zn. comparaison avec la phase α′R10.1016/0036-9748(80)90092-7 ↗
46. Considerations sur la seluence de precipitation dans les alliages aluminium-linc10.1016/0001-6160(82)90032-3 ↗
47. The influence of the anisotropic elastic constants of coherent precipitates on their equilibrium shape10.1002/pssa.2211040116 ↗
48. Effect of Zn/Mg ratio on microstructure and mechanical properties of Al-Zn-Mg alloys10.1016/j.matlet.2022.131676 ↗
49. Anisotropy of clustering during decomposition of AlZn single crystals10.1016/0036-9748(87)90250-X ↗
50. Shape anisotropy of GP zone in early decomposition process of Al-Zn binary alloy, J. of10.2320/jinstmet1952.62.2_117 ↗
51. Coherent phase stability in Al-Zn and Al-Cu fcc alloys: The role of the instability of fcc Zn10.1103/PhysRevB.60.16448 ↗
52. Prediction of alloy precipitate shapes from first principles10.1209/epl/i2001-00377-0 ↗
53. Perfect strain relaxation in metamorphic epitaxial aluminum on silicon through primary and secondary interface misfit dislocation arrays10.1021/acsnano.8b02065 ↗
54. Quantitative shape-classification of misfitting precipitates during cubic to tetragonal transformations: phase-field simulations and Experiments
55. Multiscale modeling of θ′ precipitation in Al–Cu binary alloys10.1016/j.actamat.2004.03.001 ↗
56. of Large-misfit systems: Role of Coincidence Lattice
57. Existence of hexagonal tabular β-phase in Al-Mg-Si alloys containing noble metal elements
58. Hydrogen-accelerated spontaneous microcracking in high-strength aluminium alloys10.1038/s41598-020-58834-6 ↗