The role of addition of Mo and Nb on microstructure, phase and mechanical properties in tungsten heavy alloys
Source abstract
Abstract
This study attempts to analyse the effect of Nb and Mo addition on sinterability, microstructural features, phase evolution, and mechanical properties in a W-Ni-Fe composition-based alloy. The base alloy (90W-7Ni-3Fe) and the alloy compositions with Mo and Nb addition of (1.25, 2.5, & 3.75 wt%) independently were sintered in a reducing atmosphere at 1500 °C for 60 min. Nb was selected for its lower thermal conductivity and specific heat, whereas Mo was selected for its grain refinement capabilities. Microstructural analysis by SEM revealed tungsten grain refinement from 28.60 µm for the base alloy to 18.21 µm upon 3.75 wt% Mo addition, while Nb addition, on the contrary, leads to a slight tungsten grain growth to 32.75 µm. The grain size increase was directly proportional to contiguity variation and inversely proportional to dihedral angle variation. Microstructure and phase analysis revealed Nb addition resulted in the formation of NbO 2 along with the emergence of Nb rich – Fe lean phases (relative to matrix) with channel and stripped morphology. A maximum hardness value of 385.78 ± 25.4 HV 1 was found for the alloy with 3.75 wt% Nb addition, while the least hardness value of 296.65 ± 9.15 HV 1 was found for the base alloy. An increment in compressive strength was seen with the addition of Mo and Nb to the base alloy, further Nb addition resulted in a higher compressive strength as compared to Mo addition in the alloy. The addition of Nb, a novel aspect of this study, could serve as a foundation for its inclusion as a viable alloying element in tungsten heavy alloy.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Intermetallics and Advanced Alloy Properties · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Randall M. German, Tungsten Heavy Alloy Handbook— Applications, Compositions, Fabrication, Properties, Microstructures, and Modeling of Sintered Tungsten Heavy Alloys, Metal Powder Industries Federation, 2021.
2. Sintering of refractory metals
3. Tungsten: Properties, Chemistry, Technology of Element
4. Sintered tungsten heavy alloys: Review of microstructure, strength, densification, and distortion10.1016/j.ijrmhm.2022.105940 ↗
5. A. Bose, R. Sadangi, Randall M. German, A review on alloying in tungsten heavy alloys, in: Morsi K, Marquis Fernand D. S., Meyer John L., El-Desouky Ahmed, Olevsky Eugene (Eds.), Supplemental Proceedings: Materials Processing and Interfaces TMS(The Mineral, Metals & Materials Society), 2012: pp. 455–465. https://doi.org/10.1002/9781118356074.ch59.10.1002/9781118356074.ch59 ↗
6. Recent progress in processing of tungsten heavy alloys10.1155/2014/764306 ↗
7. Substitution of Ni with NiB prevents shape distortion of liquid phase sintered 90W–6Ni–2Fe–2Co heavy alloys10.1016/j.jallcom.2020.155785 ↗
8. Processing strategy for consolidating tungsten heavy alloys for ordnance applications10.1016/S0254-0584(00)00426-0 ↗
9. Tungsten heavy alloys for kinetic energy penetrators: a review
10. Review: liquid phase sintering10.1007/s10853-008-3008-0 ↗
11. Matrix penetration of W/W grain boundaries and its effect on mechanical properties of 93W-5.6Ni-1.4Fe heavy alloy10.1007/BF02646520 ↗
12. Effect of Fe addition to binder phase on mechanical properties of tungsten heavy alloy10.1007/s12666-019-01833-7 ↗
13. Design of heat-treatment and its effect on Ni-rich matrix of a W-Ni-Co alloy10.1016/j.ijrmhm.2024.106734 ↗
14. Effect of nickel to cobalt ratio on mechanical properties of tungsten heavy alloys
15. Systematic investigation of microstructure, distortion, mechanical and thermal properties of NiB and ZrB2-modified 90W-6Ni-4Co alloys10.1016/j.ijrmhm.2024.106739 ↗
16. Microstructure and mechanical properties of matrix alloy (Ni-Fe-Co-W) derived from tungsten heavy alloys
17. Grain growth in liquid-phase-sintered W-Mo-Ni-Fe alloys10.1016/0022-5088(91)90022-V ↗
18. Effect of processing parameters on microstructure and mechanical properties of 90W-6Ni-4Mn heavy alloy10.1016/j.ijrmhm.2014.09.024 ↗
19. Matrix composition effects on the tensile properties of tungsten-molybdenum heavy alloys
20. Effect of cyclic heat treatment on the microstructure and mechanical properties of W-Ni-Co alloys10.1016/j.ijrmhm.2019.03.024 ↗
21. Cooling Rate Effects on Microstructure and Mechanical Behaviour of Tungsten Heavy Alloys
22. Fine tungsten precipitates in the matrix phase and their influence on the mechanical properties of a tungsten heavy alloy10.1080/14786435.2021.1948131 ↗
23. Effect of cobalt addition on microstructure and mechanical properties of tungsten heavy alloys10.1007/s12666-017-1074-1 ↗
24. Refractory metal alloying: a new method for improving mechanical properties of tungsten heavy alloys10.1016/j.jallcom.2017.03.174 ↗
25. High strain rate deformation behaviors of kinetic energy penetrator materials during ballistic impact10.1016/0167-6636(94)90055-8 ↗
26. Materials Issues In Computer Simulations Of Penetration Mechanics
27. H. Okamoto, M.E. Schlesinger, E.M. Mueller, ASM Handbook, ASM International, 2016.
28. Fabrication and characterization of nano-Y2O3 dispersed W-Ni-Nb alloys10.1016/j.ijrmhm.2017.11.004 ↗
29. Synthesis of nano Y2O3, TiO2, ZrO2 dispersed W-Ni-Nb-Mo alloys by mechanical alloying10.1016/j.ijrmhm.2021.105753 ↗
30. Effect of molybdenum addition on microstructure and mechanical properties of 90% tungsten heavy alloys10.1016/j.ijrmhm.2022.105868 ↗
31. The effect of Mo and dispersoids on microstructure, sintering behavior, and mechanical properties of W-Mo-Ni-Fe-Co heavy tungsten alloys
32. Combined effect of Ni and nano-Y2O3 addition on microstructure, mechanical and high temperature behavior of mechanically alloyed W-Mo10.1016/j.ijrmhm.2016.07.017 ↗
33. Fabricating fine-grained tungsten heavy alloy by spark plasma sintering of low-energy ball-milled W-2Mo-7Ni-3Fe powders10.1016/j.msea.2013.04.065 ↗
34. Precipitation mechanisms of intermetallic compounds in W-Mo-Ni-Fe alloys10.1016/j.ijrmhm.2005.02.002 ↗
35. Development and characterization of a novel fine-grained W–Ni–Mn–Mo alloys with La2O3 addition prepared via low-temperature sintering10.1007/s12540-022-01349-8 ↗
36. A review of tungsten-based alloys as kinetic energy penetrator materials, Reviews In Particulate
37. W.D.Jr Callister, D.G. Rethwisch, Materials Science and Engineering An Introduction, 2018.
38. Contiguity variation in tungsten spheroids of sintered heavy alloys10.1016/0026-0800(86)90076-5 ↗
39. Microstructure, distortion characteristics and mechanical behaviour of NiB modified 90W-6Ni-4Co heavy alloys10.1016/j.jallcom.2021.161404 ↗
40. Influence of pre-alloyed Ni-Fe-MO binder metal on properties and microstructure of tungsten heavy alloys10.1016/0167-577X(95)00023-2 ↗
41. Microstructural refinement of W-Ni-Fe heavy alloy by alloying additions10.1007/BF02647738 ↗
42. M.G. Randall, Liquid Phase Sintering, 1st ed., Springer, New York, NY, 1985. https://doi.org/10.1007/978-1-4899-3599-1.10.1007/978-1-4899-3599-1 ↗
43. Effect of rare earth metals (Y, La) and refractory metals (Mo, Ta, Re) to improve the mechanical properties of W-Ni-Fe alloy-a review10.3390/ma14071660 ↗
44. The effect of contiguity on growth kinetics in liquid-phase sintering10.1007/BF03220917 ↗
45. Microstructure of the gravitationally settled region in a liquid-phase sintered dilute tungsten heavy alloy10.1007/BF02664666 ↗
46. Modeling grain growth dependence on the liquid content in liquid-phase-sintered materials10.1007/s11661-998-0213-z ↗
47. Densification during sintering in the presence of a liquid phase. I. Theory10.1063/1.1735155 ↗
48. Effect of yttrium addition on creep properties of a Ni-base superalloy built up by selective laser melting10.1016/j.scriptamat.2020.03.014 ↗
49. Densification behavior of tungsten heavy alloy based on master sintering curve concept10.1007/BF02586116 ↗
50. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
51. B.D. Cullity, S.R. Stock, Elements of X-Ray Diffraction, 3rd ed., Pearson, 2014.
52. Variation of hardness of metals with grain size10.1038/173948b0 ↗
53. Multi-component solid solution hardening Part 2 Agreement with experimental results10.1007/BF00540988 ↗
54. Yield strength prediction in Ni-base alloy 718Plus based on thermo-kinetic precipitation simulation10.1016/j.msea.2014.04.054 ↗
55. The plastic deformation of polycrystalline aggregates10.1080/14786436208201857 ↗
56. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
57. General relationship between strength and hardness10.1016/j.msea.2011.08.061 ↗