Nano-dispersion strengthened and twinning-mediated CoCrNi medium entropy alloy with excellent strength and ductility prepared by laser powder bed fusion
Source abstract
Abstract
Laser powder bed fusion (LPBF) was explored to produce CoCrNi medium entropy alloys (MEAs) from pre-alloyed powder with a relatively high oxygen concentration (870 ppm). Microstructure, strength, and toughness were investigated, revealing the effect of oxide dispersion strengthening (ODS). LPBF CoCrNi MEAs had a porosity of <0.10 % and superior mechanical properties compared to CoCrNi-based MEAs reported in the literature. Notably, the CoCrNi MEAs denoted as S1 and S2, exhibited an excellent combination of yield strength (>735 MPa), a UTS > 1 GPa, and a total elongation of ∼ 50 %. High strength results from the high number density of nano chromium oxides (average particle size ∼20 nm), which were in situ formed during LPBF, contributing to a calculated dispersion strengthening of ∼220 MPa. The deformation mechanism was investigated by TEM characterization of the specimen after tensile testing, revealing a large number of nano-twins for S1, cellular structure and nano-twins formed for S3. Extremely low porosity and deformation twinning ensure steady plastic deformation in LPBF CoCrNi, enabling high ductility. The prospect of ODS via LPBF provides a pathway for the strengthening and toughening of medium to high entropy alloys (HEAs).
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. A lightweight single-phase AlTiVCr compositionally complex alloy10.1016/j.actamat.2016.10.037 ↗
2. Microstructure and corrosion properties of the low-density single-phase compositionally complex alloy AlTiVCr10.1016/j.corsci.2018.01.035 ↗
3. Effect of Y2O3 addition on the microstructure and mechanical properties of an Al1.8CoCrCu0.5FeNi BCC HEA10.1016/j.jallcom.2023.170647 ↗
4. Inhibiting cracking and improving strength for additive manufactured AlxCoCrFeNi high entropy alloy via changing crystal structure from BCC-to-FCC
5. Effect of cryogenic treatment on B2 nanophase, dislocation and mechanical properties of Al1.4CrFe2Ni2 (BCC) high entropy alloy10.1016/j.msea.2023.145183 ↗
6. Microstructural mechanical and corrosion properties of SS304/HEA surface layer produced by friction stir processing10.1016/j.jallcom.2023.170153 ↗
7. Remarkably high fracture toughness of HfNbTaTiZr refractory high-entropy alloy10.1016/j.jmst.2022.01.017 ↗
8. Outstanding fracture toughness combines gigapascal yield strength in an N-doped heterostructured medium-entropy alloy10.1016/j.actamat.2023.119079 ↗
9. Determination of fracture toughness of boride layers grown on Co1.21Cr1.82Fe1.44Mn1.32Ni1.12Al0.08B0.01 high entropy alloy by nanoindentation10.1016/j.ceramint.2022.08.201 ↗
10. Effects of deformation-induced martensitic transformation on cryogenic fracture toughness for metastable Si8V2Fe45Cr10Mn5Co30 high-entropy alloy10.1016/j.actamat.2021.117568 ↗
11. Dual precipitate simultaneous enhancement of tensile and fatigue strength in (FeCoNi)86Al7Ti7 high-entropy alloy fabricated using selective laser melting10.1016/j.jmst.2022.09.068 ↗
12. Tensile overload-induced texture effects on the fatigue resistance of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2022.118585 ↗
13. Effect of grain size on the low-cycle fatigue behavior of carbon-containing high-entropy alloys10.1016/j.msea.2021.140985 ↗
14. Low-cycle fatigue behavior and surface treatment of a twinning-induced plasticity high-entropy alloy10.1016/j.msea.2022.143724 ↗
15. A high-corrosion-resistant high-entropy alloys (HEAs) coatings with single BCC solid solution structure by laser remelting10.1016/j.matlet.2022.132728 ↗
16. Superior thermal stability and strength of additively manufactured CoCrFeMnNi high-entropy alloy via NbC decorated sub-micro dislocation cells10.1016/j.scriptamat.2023.115401 ↗
17. Excellent thermal stability and mechanical properties of bulk nanostructured FeCoNiCu high entropy alloy10.1016/j.msea.2022.142670 ↗
18. A novel strategy for architecting low interfacial energy transition phase to enhance thermal stability in a high-entropy alloy10.1016/j.jallcom.2023.169570 ↗
19. A surface study of the native oxide upon a compositionally complex alloy
20. Short-range order and its impact on the CrCoNi medium-entropy alloy10.1038/s41586-020-2275-z ↗
21. Tensile creep behavior of an equiatomic CoCrNi medium entropy alloy10.1016/j.intermet.2020.106775 ↗
22. Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi10.1016/j.actamat.2017.02.036 ↗
23. Alloying effects on phase stability, mechanical properties, and deformation behavior of CoCrNi-based medium-entropy alloys at low temperatures10.1016/j.intermet.2021.107399 ↗
24. Exceptional high-strain-rate tensile mechanical properties in a CrCoNi medium-entropy alloy10.1007/s40843-021-1798-6 ↗
25. Multiple deformation scheme in direct energy deposited CoCrNi medium entropy alloy at 210K10.1016/j.msea.2021.142059 ↗
26. Passivation behavior of CoCrNiZrx medium-entropy alloy in the sulfuric acid solutions10.1016/j.jelechem.2021.115693 ↗
27. Hydrogen resistance of a 1 GPa strong equiatomic CoCrNi medium entropy alloy10.1016/j.corsci.2020.108510 ↗
28. Effect of Mo doping on the gaseous hydrogen embrittlement of a CoCrNi medium-entropy alloy10.1016/j.corsci.2021.109628 ↗
29. A comparative study on the corrosion behavior of CoCrNi medium-entropy alloy and 316L stainless steel in simulated marine environment10.1016/j.intermet.2021.107370 ↗
30. The effect of the grain refinement on the corrosion resistance of the CoCrNi medium-entropy alloy in chloride solution
31. Fabrication and anticorrosion behavior of a bi-phase TaNbHfZr/CoCrNi multilayer coating through magnetron sputtering10.1016/j.corsci.2021.110020 ↗
32. Interstitial nitrogen enhances corrosion resistance of an equiatomic CoCrNi medium-entropy alloy in sulfuric acid solution10.1016/j.matchar.2020.110869 ↗
33. Corrosion behavior of CoCrNi medium-entropy alloy compared with 304 stainless steel in H2SO4 and NaOH solutions10.1016/j.corsci.2020.108973 ↗
34. Mechanical behavior in boron-microalloyed CoCrNi medium-entropy alloy studied by in situ high-energy X-ray diffraction10.1016/j.msea.2020.139600 ↗
35. CrCoNi medium-entropy alloy thin-walled parts manufactured by laser metal deposition: microstructure evolution and mechanical anisotropy10.1016/j.msea.2021.141306 ↗
36. Ultra-high tensile strength nanocrystalline CoCrNi equi-atomic medium entropy alloy processed by high-pressure torsion10.1016/j.msea.2018.08.079 ↗
37. Achieving ultra-high strength and ductility in equiatomic CrCoNi with partially recrystallized microstructures10.1016/j.actamat.2018.12.015 ↗
38. Enhancement on mechanical properties of CoCrNi medium entropy alloy via cold spray additive manufacturing associated with sintering10.1016/j.jmapro.2023.03.017 ↗
39. The effect of annealing on mechanical properties of selective laser melted CoCrNi medium-entropy alloy
40. Exceptional strength-ductility synergy of additively manufactured CoCrNi medium-entropy alloy achieved by lattice defects in heterogeneous microstructures10.1016/j.jmst.2022.03.024 ↗
41. High strength and ductility of an additively manufactured CrCoNi medium-entropy alloy achieved by minor Mo doping10.1016/j.msea.2022.143129 ↗
42. Excellent combination of strength and ductility of CoCrNi medium entropy alloy fabricated by laser aided additive manufacturing
43. Strength-ductility synergy of CoCrNi medium-entropy alloy processed with laser powder bed fusion10.1016/j.matdes.2022.110774 ↗
44. The crystallographic texture and dependent mechanical properties of the CrCoNi medium-entropy alloy by laser remelting strategy10.1016/j.jmst.2021.08.094 ↗
45. Microstructure, properties, and metallurgical defects of an equimolar CoCrNi medium entropy alloy additively manufactured by selective laser melting10.1007/s11661-020-06121-4 ↗
46. 1.45 GPa ultrastrong cryogenic strength with superior impact toughness in the in-situ nano oxide reinforced CrMnFeCoNi high-entropy alloy matrix nanocomposite manufactured by laser powder bed fusion10.1016/j.jmst.2021.04.030 ↗
47. Cracks suppression strategies for CoCrNi medium entropy alloy fabricated by laser directed energy deposition10.1016/j.matdes.2022.111579 ↗
48. Additive manufacturing of oxide dispersion-strengthened CoCrNi medium-entropy alloy by in situ oxide synthesis10.1016/j.jallcom.2023.171340 ↗
49. Avoiding oxygen-induced early fracture in titanium with high strength via entangled grains through laser powder bed fusion10.1016/j.scriptamat.2022.115051 ↗
50. Effect of the powder feedstock on the oxide dispersion strengthening of 316L stainless steel produced by laser powder bed fusion10.1016/j.matchar.2020.110582 ↗
51. On the role of atmospheric oxygen into mechanical properties and fracture behavior of selective laser melted AlCu5MnCdVA10.1016/j.matdes.2018.04.003 ↗
52. High stress twinning in a compositionally complex steel of very high stacking fault energy10.1038/s41467-022-31315-2 ↗
53. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
54. Atomic-scale distorted lattice in chemically disordered equimolar complex alloys10.1016/j.actamat.2018.03.008 ↗
55. Friction stress and Hall-Petch relationship in CoCrNi equi-atomic medium entropy alloy processed by severe plastic deformation and subsequent annealing10.1016/j.scriptamat.2017.02.042 ↗
56. An improved X-ray diffraction analysis method to characterize dislocation density in lath martensitic structures10.1016/j.msea.2015.05.003 ↗
57. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
58. Additive manufacturing of fine-grained and dislocation-populated CrMnFeCoNi high entropy alloy by laser engineered net shaping10.1016/j.msea.2019.138056 ↗
59. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
60. Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy10.1016/j.actamat.2017.07.029 ↗
61. Influence of oxides on the cryogenic tensile properties of the laser aided additive manufactured CoCrNi medium entropy alloy10.1016/j.compositesb.2021.108837 ↗
62. A perspective on precipitation-hardening high-entropy alloys fabricated by additive manufacturing10.1016/j.matdes.2021.110161 ↗
63. Microstructural evolution and precipitated phase characteristics in the fusion zone for the as-repaired Inconel 718 alloy by directed energy deposition additive manufacturing10.1016/j.matchar.2023.113222 ↗
64. Remarkable cryogenic strengthening and toughening in nano-coherent CoCrFeNiTi0.2 high-entropy alloys via energetically-tuning polymorphous precipitates10.1016/j.msea.2022.143111 ↗
65. Evolution of the microstructure and mechanical properties of as-cast Al0.3CoCrFeNi high entropy alloys by adding Si content10.1016/j.msea.2022.142983 ↗
66. Columnar to equiaxed transition and grain refinement of cast CrCoNi medium-entropy alloy by microalloying with titanium and carbon10.1016/j.jallcom.2018.10.187 ↗