Improving the product of strength and ductility and corrosion resistance by adding He shielding gas in the CMT additive manufacturing process of Ti6Al4V

The cold metal transfer additive manufacturing (CMTAM) of titanium alloys presents a promising solution for the efficient fabrication of large titanium alloy armor components. In this study, different proportions of He gas were added to the welding shielding gas used in the CMTAM of Ti6Al4V, aiming to improve forming quality, the product of strength and ductility and corrosion resistance. Simultaneously, the influence of different He contents on the microstructure, mechanical properties, and corrosion behavior of CMTAM of Ti6Al4V was explored. The research revealed that during the process of CMTAM of Ti6Al4V, as the proportion of He as the shielding gas increased, the arc voltage increases, and the arc becomes more stable. Meanwhile, the wettability of the weld pool improves, resulting in a more spread out weld pool. The fabrication precision of the built material also improved. Microstructural observations indicate that the prior-β grain size gradually increased with the increase in He proportion, the heat input for additive manufacturing also increased，and the martensitic α’ transformed into a basketweave α+β structure. The length and width of the α phase increased, the texture intensity decreased, and the Schmid factor increased. Tensile tests were conducted on samples with different He proportions showed that as the He proportion increased, within the component resulted in a noteworthy enhancement in the product of strength and ductility increase exceeding 50 %. This suggests that He as the shielding gas addition can effectively optimize the strength-plasticity balance in additive manufactured titanium alloys without the need for post-processing heat treatment. Electrochemical tests were conducted in a 3.5 wt% NaCl solution revealed that the addition of He gas significantly improved the corrosion resistance of Ti6Al4V. Specifically, the corrosion resistance was optimal when the shielding gas composition was 50 %He+50 %Ar, far surpassing that of cast Ti6Al4V.