Preliminary study on the dynamic deformation mechanism of CoCrFeNi high-entropy alloy and its application in the shaped charge liner
Source abstract
Abstract
High-entropy alloys (HEAs) with a face-centered cubic structure offer numerous advantages, including high plasticity, good processability, and high-temperature resistance. They are also suitable for use as materials in shaped-charge liners, which can cause significant damage. In this study, CoCrFeNi HEAs were prepared, and their mechanical characteristics were examined. The results indicated that the alloy exhibited good plasticity and processability. After dynamic compression, the samples were analyzed using electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM). It was found that dislocation was the primary deformation mechanism at low strain rates. However, as the strain rate increased, the deformation mechanism shifted from dislocations to a combination of dislocations and twinning. The damage performance of the CoCrFeNi HEA was verified through a static penetration experiment using a conical charge. The results were then compared with simulation results obtained using the AUTODYN software. This study demonstrated that the CoCrFeNi HEA could form a condensed, stable-shaped charge jet, leading to efficient damage after penetrating the steel target plate. Therefore, after uniform treatment, the CoCrFeNi HEA can be utilized as a high-energy structural material to design shaped charge structures that achieve highly efficient damage.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Theoretical study on hole evolution of inclination finite thickness metal plate impacted by shaped charge jet10.1016/j.ijimpeng.2022.104177 ↗
2. Jet formation and penetration performance of a double-layer charge liner with chemically deposited tungsten as the inner liner10.1016/j.dt.2023.08.016 ↗
3. Dynamic compression-shear ignition mechanism of Al/PTFE reactive materials10.1016/j.compstruct.2024.117908 ↗
4. Penetration and internal blast behavior of reactive liner enhanced shaped charge against concrete space10.1016/j.dt.2021.04.011 ↗
5. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
6. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
7. A review on microstructures, mechanical properties and processing of high entropy alloys reinforced composite materials10.1016/j.jallcom.2023.172732 ↗
8. Bulk and grain boundary tracer diffusion in multiphase AlCoCrFeNiTi0.2 compositionally complex alloy10.1016/j.actamat.2023.119352 ↗
9. Significant strength enhancement of high-entropy alloy via phase engineering and lattice distortion10.1016/j.jallcom.2023.172963 ↗
10. Surprising cocktail effect in high entropy alloys on catalyzing magnesium hydride for solid-state hydrogen storage
11. Lightweight, ultrastrong and high thermal-stable eutectic high-entropy alloys for elevated-temperature applications10.1016/j.actamat.2023.118806 ↗
12. Phase-selective recrystallization makes eutectic high-entropy alloys ultra-ductile10.1038/s41467-022-32444-4 ↗
13. A novel bulk eutectic high-entropy alloy with outstanding as-cast specific yield strengths at elevated temperatures10.1016/j.scriptamat.2021.114132 ↗
14. Strong yet ductile nanolamellar high-entropy alloys by additive manufacturing10.1038/s41586-022-04914-8 ↗
15. Effects of stress states and strain rates on mechanical behavior and texture evolution of the CoCrFeNi high-entropy alloy: experiment and simulation10.1016/j.jallcom.2020.156779 ↗
16. An atomistic study on grain-size and temperature effects on mechanical properties of polycrystal CoCrFeNi high-entropy alloys
17. Mechanical behavior of high-entropy alloys10.1016/j.pmatsci.2021.100777 ↗
18. Nanoindentation creep behavior of hexagonal close-packed high-entropy alloys
19. A comprehensive review on advances in high entropy alloys: Fabrication and surface modification methods, properties, applications, and future prospects10.1016/j.jmapro.2023.12.039 ↗
20. A review on the dynamic-mechanical behaviors of high-entropy alloys10.1016/j.pmatsci.2023.101090 ↗
21. Ballistic impact response of complex concentrated alloys10.1016/j.ijimpeng.2021.104091 ↗
22. Investigation of mechanical behavior, constitutive modeling, and fracture criteria for as-cast Al0.3CoCrFeNi high entropy alloy10.1016/j.intermet.2023.108029 ↗
23. Shock-induced deformation and spallation in CoCrFeMnNi high-entropy alloys at high strain-rates10.1016/j.ijplas.2023.103691 ↗
24. Role of lattice resistance in the shock dynamics of FCC-structured high entropy alloy
25. Recent progress on impact induced reaction mechanism of reactive alloys10.1016/j.dt.2023.11.002 ↗
26. Compression properties and impact energy release characteristics of TiZrNbV high-entropy alloy10.1016/j.msea.2021.142074 ↗
27. Experimental study on WFeNiMo high-entropy alloy projectile penetrating semi-infinite steel target10.1016/j.dt.2021.06.001 ↗
28. Shock-induced energy release reaction characteristics of Nb17Zr33Ti17W33 high entropy alloy10.1016/j.jallcom.2024.173881 ↗
29. Tailoring the non-coherent interfacial precipitation to overcome the trade-off between strength-ductility and impact energy release in Ti–Zr–Hf–Nb–Ta high entropy alloy10.1016/j.intermet.2024.108194 ↗
30. Dynamic deformation behaviors and mechanisms of CoCrFeNi high-entropy alloys10.1016/j.actamat.2023.119343 ↗
31. Deformation mechanism and mechanical properties of a CoCrFeNi high-entropy alloy via room-temperature rolling, cryorolling, and asymmetric cryorolling10.1016/j.jallcom.2023.170883 ↗
32. Simultaneous enhancement of strength and ductility in a NiCoCrFe high-entropy alloy upon dynamic tension: micromechanism and constitutive modeling10.1016/j.ijplas.2019.08.013 ↗
33. Macrokinetics of thermal explosion in a 3Ni-Al system mechanically activated in a low-energy mill10.1016/j.jallcom.2023.169790 ↗
34. Effect of temperature on tensile behavior, fracture morphology, and deformation mechanisms of Nickel-based additive manufacturing 939 superalloy10.1016/j.jallcom.2023.170559 ↗
35. Dynamic recrystallization mechanism of Ti-6554 alloy during high-temperature deformation10.1016/j.jallcom.2023.170534 ↗
36. Microstructure, dislocation density and microhardness of 1%C-doped CoCrFeNi complex concentrated alloys during isochronal annealing10.1016/j.jallcom.2022.167504 ↗
37. Investigation on the evolution mechanism of dislocation in nano-cutting of FeCoNiCrAlx high entropy alloy10.1016/j.jallcom.2023.172814 ↗
38. Deformation twinning in silver-and copper-alloy crystals10.1080/14786437408226586 ↗
39. Generalized stacking fault energies, ductilities, and twinnabilities of CoCrFeNi-based face-centered cubic high entropy alloys10.1016/j.scriptamat.2017.06.014 ↗
40. The origin of negative stacking fault energies and nano-twin formation in face-centered cubic high entropy alloys10.1016/j.scriptamat.2016.11.014 ↗
41. Towards stacking fault energy engineering in FCC high entropy alloys10.1016/j.actamat.2021.117472 ↗
42. High-velocity impact performance of AA 7475-T7351 aluminum square plates struck by steel projectiles: assessing leakage limit velocity10.1016/j.ijimpeng.2024.104913 ↗
43. A study on damage characteristics of double-layer cylindrical shells subjected to underwater contact explosion10.1016/j.ijimpeng.2022.104428 ↗
44. Constitutive modeling and microstructure research on the deformation mechanism of Ti-6Al-4V alloy under hot forming condition10.1016/j.jallcom.2021.162128 ↗
45. Johnson G., Cook W. A Constitutive Model and Data for Metals Subjected to Large Strains High Rates and High Temperatures, in Proceedings of the Seventh International Symposium on Ballistics,The Netherlands,The Hague,1983：541-547.
46. A modified Johnson-Cook model for FeCoNiCr high entropy alloy over a wide range of strain rates10.1016/j.matlet.2018.01.163 ↗
47. Dynamic response and cumulative damage mechanism of simplified hull girders under repeated underwater explosions10.1016/j.tws.2023.111554 ↗
48. Experimental and numerical investigation of zirconium jet performance with different liner shapes design10.1016/j.dt.2020.11.019 ↗
49. Effects of shock stress and microstructure on shock response of Al-Hf reactive materials10.1016/j.jallcom.2023.172569 ↗
50. Shock compression and spall damage of dendritic high-entropy alloy CoCrFeNiCu10.1016/j.jallcom.2023.169650 ↗
51. Voigt-Reuss topology optimization for structures with nonlinear material behaviors10.1002/(SICI)1097-0207(19971030)40:20<3785::AID-NME240>3.0.CO;2-V ↗
52. Selected Hugoniots, Report LA-4167-MS, Los Alamos Scientific Laboratory, Los Alamos, NM,1 May 1969.
53. Penetration behavior of reactive liner shaped charge jet impacting thick steel plates10.1016/j.ijimpeng.2018.12.005 ↗
54. Constitutive relation and fracture criterion of 2A12 aluminum alloy
55. Study on the failure mode of a sandwich composite structure under the combined actions of explosion shock wave and fragments10.1016/j.matdes.2020.109166 ↗
56. Fessler · 1994