journal article·2024-09

Hot deformation behavior and processing map of vanadium particles reinforced AZ31 composite

Hongbin Zhang, Shengchao Chen, Yilin Huang, Haiping Zhou, Shengxue Qin, Jie Liu

Publisher page

Abstract

The vanadium particles reinforced AZ31 matrix composite (V P /AZ31) was prepared using the powder metallurgy method. Subsequently, hot deformation behavior of V P /AZ31 composite was studied through hot compression trials. The experimental parameters were set in a temperature range of 250–400 °C and a strain rate range of 0.001–1 s −1 . Based on the experimental results, a strain-compensated Arrhenius constitutive model was developed to accurately forecast the flow behavior of V P /AZ31 composite. Moreover, the thermal activation energy was calculated to be 138.605 kJ/mol and the processing map was delineated according to the dynamic material model theory. The processing map revealed that the optimal processing area existed under 363–400 °C/0.001–0.004 s −1 , where the efficiency of power dissipation exceeded 23 %. Notably, the highest efficiency of power dissipation occurred at 400 °C/1 s −1 , which exceeded 30 %. Under these conditions, dynamic recrystallization (DRX) was sufficiently developed, indicating the enhancement of workability. It is estimated that the instability region for V P/AZ31 composites occurred within the conditions of 250–325 °C/0.16–1 s −1 , characterized by crack formation. The DRX of V P/AZ31 composite is predominantly governed through the mechanism of discontinuous DRX (DDRX).
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Effect of submicron size SiC particulates on microstructure and mechanical properties of AZ91 magnesium matrix composites10.1016/j.jallcom.2010.05.159 ↗
2. Synthesis and characterization of high performance low volume fraction TiC reinforced Mg nanocomposites targeting biocompatible/structural applications10.1016/j.msea.2015.01.007 ↗
3. Enhancing overall tensile and compressive response of pure Mg using nano-TiB2 particulates10.1016/j.matchar.2014.05.021 ↗
4. Microstructure and mechanical properties at elevated temperature of Mg-Al-Ni alloys prepared through powder metallurgy10.1016/j.jmst.2017.02.002 ↗
5. Extraordinary strengthening of magnesium by solid-state diffusion of copper in Mg-0.5Cu Alloy10.1007/s11837-020-04023-9 ↗
6. Microstructures and mechanical properties of ultrafine-grained Ti/AZ31 magnesium matrix composite prepared by powder metallurgy10.1016/j.apt.2018.09.001 ↗
7. Microstructure and mechanical properties of AZ31 magnesium alloy reinforced with novel sub-micron vanadium particles by powder metallurgy10.1016/j.jmrt.2021.09.015 ↗
8. Types of component interfaces in metal matrix composites on the example of magnesium matrix composites10.3390/ma14185182 ↗
9. Effect of vanadium reinforcement on the microstructure and mechanical properties of magnesium matrix composites10.3390/cryst11070806 ↗
10. Hot deformation behavior and microstructures evolution of gnp-reinforced fine-grained Mg composites
11. Improved workability of an Mg-5 wt%Zn alloy by the addition of trace SiCp
12. The hot deformation behavior, microstructure and texture evolution of homogenized Mg-9Li-1Zn alloy10.1016/j.jmrt.2023.05.266 ↗
13. Effect of AlLi phase on deformation behavior and dynamic recrystallization of Mg-Li alloy during hot compression10.1016/S1003-6326(23)66189-8 ↗
14. Temperature rises and constitutive equation of homogenized 6063 aluminum alloy for extrusion10.1088/2053-1591/acff3d ↗
15. Characterization of hot deformation behavior of as-extruded AZ31 alloy through kinetic analysis and processing maps10.1016/j.jmatprotec.2019.116325 ↗
16. Deformation behavior and processing map development of AZ91 Mg alloy with and without addition of hybrid in-situ TiC+TiB2 reinforcement10.1016/j.jallcom.2018.10.276 ↗
17. Investigation on hot deformation behavior and quenching precipitation mechanism of 2195 Al-Li alloy10.1016/j.matdes.2023.112366 ↗
18. Effects of Sm element addition on the workability and microstructure evolution of Mg-Gd-Y-Zr alloy during hot deformation10.1016/j.matdes.2023.111962 ↗
19. Microstructure and thermal stability of nanocrystalline AZ31 Mg alloys reinforced by ultrafine vanadium particles10.1016/j.jmrt.2023.01.082 ↗
20. Effect of Ce addition on hot deformation behavior and microstructure evolution of AZ80 magnesium alloy10.1016/j.jmrt.2021.12.083 ↗
21. The effect of nano β-TCP on hot compression deformation behavior and microstructure evolution of the biomedical Mg-Zn-Zr alloy10.1016/j.msea.2018.01.006 ↗
22. Hot deformation behavior of an extruded AZ31 alloy doped with rare-earth elements10.1016/j.jallcom.2020.156961 ↗
23. Hot deformation behavior of an as-extruded Mg-2.5Zn-4Y alloy containing LPSO phases10.3390/met12040674 ↗
24. The hot compressive deformation behavior of cast Mg-Gd-Y-Zn-Zr alloys with and without LPSO phase in their initial microstructures10.1016/j.jma.2022.01.006 ↗
25. Hot-deformation kinetics analysis and extrusion parameter optimization of a dilute rare-earth free magnesium alloy10.1016/j.jma.2022.07.013 ↗
26. Microstructure and Hot Deformation Behavior of the Mg-8 wt% Sn-1.5 wt% Al Alloy.10.3390/ma14082050 ↗
27. Hot deformation behavior and processing map of a new type Mg-6Zn-1Gd-1Er alloy10.1016/j.jallcom.2021.158700 ↗
28. Dynamic recrystallization kinetics and microstructure evolution of an AZ91D magnesium alloy during hot compression10.1016/j.matchar.2018.08.028 ↗
29. Comparative study on high temperature deformation behavior and processing maps of Mg-4Zn-1RE-0.5Zr alloy with and without in-situ sub-micron sized TiB2 reinforcement10.1016/j.jma.2021.12.009 ↗
30. Hot deformation behavior and workability characteristics of bimodal size SiCp/AZ91 magnesium matrix composite with processing map10.1016/j.matdes.2014.07.039 ↗
31. Hot deformation behavior and processing map of AZ61/SiC composites
32. Hot deformation behavior and flow stress modeling of Ti-6Al-4V alloy produced via electron beam melting additive manufacturing technology in single β-phase field10.1016/j.msea.2020.139822 ↗
33. Modeling of dynamic material behavior in hot deformation: forging of Ti-624210.1007/BF02664902 ↗
34. Processing map for hot working of alpha-zirconium10.1007/BF02658992 ↗
35. Hot deformation behavior and microstructure evolution of flaky Ti3AlC2 particles reinforced pure Al composite10.1016/j.jallcom.2022.167118 ↗
36. Revealing the grain size dependent hot workability and deformation mechanisms in a Mg-Zn-Y alloy10.1016/j.jma.2021.08.001 ↗
37. Processing map for controlling microstructure and unraveling various deformation mechanisms during hot working of CoCrFeMnNi high entropy alloy10.1016/j.msea.2020.139840 ↗
38. The hot deformation behavior and microstructure evolution of HA/Mg-3Zn-0.8Zr composites for biomedical application10.1016/j.msec.2017.03.239 ↗
39. Development of processing maps for 3 vol% TiCp/AZ91D composites material10.1016/j.msea.2010.03.095 ↗
40. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
41. Grain refinement of magnesium alloys by dynamic recrystallization (DRX): a review10.1016/j.jmrt.2023.07.150 ↗
42. Hot deformation behavior and dynamic recrystallization mechanism of an Mg-5wt%Zn alloy with trace SiCp addition10.1016/j.jmrt.2020.11.105 ↗
43. Hot deformation behavior and processing maps of hybrid SiC and CNTs reinforced AZ61 alloy composite10.1016/j.jallcom.2021.159098 ↗