journal article·2024-08

The influence of in-situ induced and MnO2 polymorph-dependent structural changes to the energy storage and mechanism of supercapacitors

Zhongchun Yuan, Jia Li, Mengqin Yao, Jun Ma, Shuo Geng, Chunliang Yang, Fei Liu

Publisher page

Abstract

Due to its economic, environmental, and theoretical advantages, manganese dioxide (MnO 2 ) is a promising cathode material for supercapacitors. However, the commercial application of MnO 2 still faces challenges such as low intrinsic conductivity, slow ion diffusion, and structural instability. In this study, four crystalline forms of MnO 2 powder electrodes (α-, β-, γ-, and δ-MnO 2) were prepared, and results showed that with a specific capacitance of 218.2 F∙g −1, δ-MnO 2 exhibited the best electrochemical performance. This was primarily due to the fact that δ-MnO 2 possesses a high specific surface area, rich oxygen vacancy, and fast electron-ion transfer speed. A self-supported electrode (δ-MnO 2/NF) without binder addition was further prepared using an in-situ-induced technique. The results revealed that the specific capacitance of δ-MnO 2/NF was as high as 809.4 F∙g −1 and that the capacity retention rate and coulombic efficiency after 5000 cycles were 92.8 % and 99.2 %, respectively, which were superior to those of δ-MnO 2 (80.3 % and 93.5 %). In-situ induction not only amplifies the structural advantages of δ-MnO 2 but also generates more electrochemical active sites due to the intense interaction between NF and δ-MnO 2 . In addition, ultrathin nanosheet arrays formed on the NF provide a three-dimensional conductive network for the transport of ions and electrons. Density functional theory calculations were performed to verify the excellent electronic conductivity and ion diffusivity of δ-MnO 2 and showed that transferring electrons from metal Ni to δ-MnO 2 is the basis for producing numerous oxygen vacancies in δ-MnO 2/NF.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Advancements in Battery Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Zn-doped MnO2 ultrathin nanosheets with rich defects for high performance aqueous supercapacitors10.1016/j.electacta.2022.140339 ↗
2. One-step hydrothermal synthesis of flower-like MnO2-NixCo1-x(OH)2@carbon felt positive electrodes with 3D open porous structure for high-performance asymmetric supercapacitors10.1007/s10853-020-05548-9 ↗
3. Supercapacitor and supercapattery as emerging electrochemical energy stores10.1080/09506608.2016.1240914 ↗
4. Supercapacitors: properties and applications10.1016/j.est.2018.03.012 ↗
5. Configuration-dependent stretchable all-solid-state supercapacitors and hybrid supercapacitors10.1002/cey2.320 ↗
6. Synergistic coupling of MnS/Ni3S2 and Co(OH)2 nanosheets as binder-free electrode materials for asymmetric supercapacitors with enhanced performance10.1016/j.fuel.2023.129754 ↗
7. Recent advances in and perspectives on pseudocapacitive materials for supercapacitors-a review10.1016/j.jpowsour.2022.232558 ↗
8. High lithium storage capacity and rate capability achieved by mesoporous Co3O4 hierarchical nanobundles10.1016/j.jpowsour.2013.08.069 ↗
9. Nanostructured MnO2 as electrode materials for energy storage10.3390/nano7110396 ↗
10. Mesoporous NiCo2O4 nanowire arrays grown on carbon textiles as binder-free flexible electrodes for energy storage10.1002/adfm.201303138 ↗
11. Transition metal based battery-type electrodes in hybrid supercapacitors: a review10.1016/j.ensm.2020.03.003 ↗
12. Tuning crystal structure of MnO2 during different hydrothermal synthesis temperature and its electrochemical performance as cathode material for zinc ion battery10.1016/j.vacuum.2021.110398 ↗
13. Effect of MnO2 polymorphs’ structure on low-temperature catalytic oxidation: crystalline controlled oxygen vacancy formation10.1021/acsami.2c01727 ↗
14. Physicochemical properties of different crystal forms of manganese dioxide prepared by a liquid phase method and their quantitative evaluation in capacitor and battery materials10.1039/D3NA00144J ↗
15. Phase-controlled synthesis of polymorphic MnO2 structures for electrochemical energy storage10.1039/C4TA06943A ↗
16. Construction of NiO/MnO2/CeO2 hybrid nanoflake arrays as platform for electrochemical energy storage10.1016/j.jpowsour.2017.07.013 ↗
17. Fabrication of plate-like MnO2 with excellent cycle stability for supercapacitor electrodes10.1016/j.electacta.2018.08.126 ↗
18. Self-supported electrode based on two-dimensional NiPS3 for supercapacitor application10.1016/j.jcis.2022.02.089 ↗
19. One-step synthesis of hierarchical Ni3Se2 nanosheet-on-nanorods/Ni foam electrodes for hybrid supercapacitors10.1016/j.cclet.2021.06.021 ↗
20. Full synergistic contribution of electrodeposited three-dimensional NiCo2O4@MnO2 nanosheet networks electrode for asymmetric supercapacitors10.1016/j.nanoen.2016.08.013 ↗
21. Symmetric supercapacitors composed of ternary metal oxides (NiO/V2O5/MnO2) nanoribbon electrodes with high energy storage performance10.1016/j.cej.2021.131804 ↗
22. Effectiveness of MnO2 and V2O5 deposition on light fostered supercapacitor performance of WTiO2 nanotube: novel electrodes for photo-assisted supercapacitors10.1016/j.cej.2022.137941 ↗
23. Metal-organic framework derived functional MnO2 via an in-situ oxidation strategy for advanced quasi-solid-state supercapacitors10.1016/j.jpowsour.2023.232705 ↗
24. Effects of phase structure of MnO2 and morphology of δ-MnO2 on toluene catalytic oxidation10.1016/j.apsusc.2019.143662 ↗
25. Ultrasonic treatment enhances the formation of oxygen vacancies and trivalent manganese on alpha-MnO2 surfaces: mechanism and application10.1016/j.jcis.2022.06.144 ↗
26. Scalable synthesis of triple-core-shell nanostructures of TiO2@MnO2@C for high performance supercapacitors using structure-guided combustion waves10.1002/smll.201703755 ↗
27. Zn2+ Pre-intercalation stabilizes the tunnel structure of MnO2 nanowires and enables zinc-ion hybrid supercapacitor of battery-level energy density
28. In-plasma catalytic degradation of toluene over different MnO2 polymorphs and study of reaction mechanism10.1016/S1872-2067(17)62808-0 ↗
29. Rational construction of oxygen vacancies onto tungsten trioxide to improve visible light photocatalytic water oxidation reaction10.1016/j.apcatb.2018.08.029 ↗
30. Rich bulk oxygen vacancies-engineered MnO2 with enhanced charge transfer kinetics for supercapacitor10.1016/j.cej.2021.129186 ↗
31. Creating oxygen-vacancies in MoO3-x nanobelts toward high volumetric energy-density asymmetric supercapacitors with long lifespan10.1016/j.nanoen.2019.01.071 ↗
32. Local structure of lithiated manganese oxides10.1016/j.ssi.2005.10.012 ↗
33. Reversible phase transformation of MnO2 nanosheets in electrochemical capacitor investigated by in-situ Raman spectroscopy10.1039/C0CC03902K ↗
34. In situ synthesis of a self-supported MnO2-based cathode for high-performance zinc-ion batteries by K+ pre-intercalation10.1016/j.apsusc.2022.154578 ↗
35. Tunable dielectric response and electronic conductivity of potassium-ion-doped tunnel-structured manganese oxides10.1063/1.5021614 ↗
36. Synthesis of porous δ-MnO2 nanosheets and their supercapacitor performance10.1016/j.jelechem.2019.02.059 ↗
37. Metal-organic framework derived nickel-cobalt layered double hydroxide nanosheets cleverly constructed on interconnected nano-porous carbon for high-performance supercapacitors10.1016/j.est.2022.106559 ↗
38. Hydrothermal synthesis of Cu2O/CuO/hierarchical porous N-doped activated carbon with exceptional electrochemical performance10.1016/j.est.2022.106600 ↗
39. A 3D nanocomposite of NiCo2S4/CuCo2S4 heterostructure synthesized by chemical precipitation for asymmetric supercapacitors10.1016/j.jallcom.2023.169170 ↗
40. Hollow core-shell CuCo2O4@MoNi-layered double hydroxides as an electrode material for supercapacitors10.1016/j.est.2023.106691 ↗
41. Inlaid layered double hydroxides and Mxene composite electrodes with high rate performance as asymmetric supercapacitors10.1007/s10854-022-09395-z ↗
42. Tuning the electrochemical performance of NiCo2O4@NiMoO4 core-shell heterostructure by controlling the thickness of the NiMoO4 shell10.1016/j.cej.2019.03.168 ↗
43. In situ crystallographic investigations of charge storage mechanisms in MnO2-based electrochemical capacitors10.1016/j.jpowsour.2012.01.103 ↗
44. Bridging the gap between charge storage site and transportation pathway in molecular-cage-based flexible electrodes10.1021/acscentsci.3c00027 ↗
45. Carbon nanotube fibers decorated with MnO2 for wire-shaped supercapacitor10.3390/molecules26113479 ↗
46. Regulating voltage window and energy density of aqueous asymmetric supercapacitors by pinecone-like hollow Fe2O3/MnO2 nano-heterostructure
47. Hierarchical hollow MnO2 nanofibers with enhanced supercapacitor performance10.1016/j.jcis.2017.11.052 ↗
48. Enhanced energy density and wide potential window for K incorporated MnO2@carbon cloth supercapacitor10.1016/j.cej.2021.128967 ↗
49. MnO2 nanorod loaded activated carbon for high-performance supercapacitors10.1016/j.jallcom.2022.164834 ↗
50. Adjusting the coordination environment of Mn enhances supercapacitor performance of MnO2
51. High performance MnO2 supercapacitor material prepared by modified electrodeposition method with different electrodeposition voltages10.1016/j.est.2020.101363 ↗
52. Vacuum annealed MnO2 ultra-thin nanosheets with oxygen defects for high performance supercapacitors10.1016/j.jpcs.2020.109856 ↗
53. Synthesis of MnO2/NiCo-layered double hydroxide hybrid as electrode materials for supercapacitor10.1007/s10904-020-01481-1 ↗
54. Multicore-shell MnO2@Ppy@N-doped porous carbon nanofiber ternary composites as electrode materials for high-performance supercapacitors10.1016/j.jcis.2023.06.003 ↗
55. Oxygen-vacancy abundant ultrafine Co3O4/Graphene composites for high-rate supercapacitor electrodes
56. High mass loading MnO2 with hierarchical nanostructures for supercapacitors10.1021/acsnano.8b00621 ↗