journal article·2024-06

Excellent temperature–humidity stability in (Tb1/2Ta1/2) Ti1-O2 ceramics with colossal permittivity and low–loss tangent

Nateeporn Thongyong, Kaniknun Sreejivungsa, Phornpun Kawee, Narong Chanlek, Masaki Takesada, Prasit Thongbai

Publisher page

Abstract

Colossal permittivity (CP) materials are critical in ceramic capacitor applications and have been extensively studied. However, investigations into their dielectric properties under various environmental conditions remain sparse. This study aims to explore the CP characteristics of (Tb 1/2Ta 1/2) xTi 1-xO 2 (TbTTO– x, with x = 1%, 5%, and 10%) as functions of frequency, temperature, and relative humidity (%RH). Notably, the TbTTO–10% composition exhibits outstanding dielectric properties, with a permittivity (ε′) of ∼6 × 10 4 and a low-loss tangent (tanδ∼0.009) at 1 kHz. The temperature dependence of ε′ varies between −2.95% and 10.3% over a range of −60°C–200°C, while maintaining a low tanδ, even at 200°C (tanδ∼0.075). Dielectric relaxations were analyzed across an extensive temperature range from −258°C to 210°C. Using an integrated analysis of phase structure, microstructure, and X-ray photoelectron spectroscopy, the remarkable CP properties are attributed to both intrinsic and extrinsic factors. In addition to the impressive giant dielectric properties of the TbTTO–10%, the 3-D surface contour plot for the RH–temperature dependence of capacitance (C p) reveals minimal changes (<5%) in C p dependence on humidity, spanning 30%–90%RH, across temperatures ranging from 25°C to 85°C. This research provides insights into the complex influences on the dielectric properties of TbTTO, highlighting their potential for advanced ceramic capacitor applications, particularly in varying environmental conditions.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Dielectric properties of ceramics · Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Thermal activation energy on electrical degradation process in BaTiO3 based multilayer ceramic capacitors for lifetime reliability10.1038/s41598-024-51254-w ↗
2. NaNbO3-based multilayer ceramic capacitors with ultrahigh energy storage performance10.1002/aenm.202304291 ↗
3. Colossal permittivity of (Tm+Nb) co-doped rutile-TiO2 ceramics with ultralow dielectric loss and excellent thermal stability10.1016/j.jallcom.2022.166200 ↗
4. High breakdown electric field in (Ta1−xPrx)0.03Ti0.97O2 colossal permittivity ceramics through defect chemistry optimization10.1016/j.jallcom.2022.167323 ↗
5. Optimize the dielectric properties of CaCu3Ti4O12 ceramics by adjusting the conductivities of grains and grain boundaries10.1016/j.jeurceramsoc.2022.11.022 ↗
6. Widening the temperature range and improving the linearity of CaCu3Ti4O12 ceramics for high-temperature NTC thermistor application through entropy engineering strategy10.1016/j.jallcom.2023.172908 ↗
7. Tuning electrical heterogeneity in CaCu3Ti4O12-ZnO ceramics for high dielectric and nonlinear properties10.1016/j.materresbull.2023.112276 ↗
8. Effects of multiple cations and sintering temperature on microstructure and dielectric properties in Na1/2Ln1/2Cu3Ti4O12 (Ln = Sm and Eu) ceramic materials10.1038/s41598-023-42610-3 ↗
9. Enhanced optical, dielectric, and non-Ohmic properties in Ta-doped Bi2/3Cu3Ti4O12 ceramics10.1016/j.solidstatesciences.2024.107495 ↗
10. Dielectric study of pure CuO nanoparticles prepared through exploding wire technique
11. Extremely reduced loss tangent with retaining ultra high dielectric permittivity in Mg2+-doped La1.9Sr0.1NiO4 ceramics10.1016/j.heliyon.2023.e13583 ↗
12. Influence of baric and thermobaric effects on dielectric properties of complex oxide ceramics La1.8Sr0.2Ni0.8Co0.2O4+δ10.1016/j.ceramint.2023.02.049 ↗
13. Simultaneously achieving colossal permittivity, ultralow dielectric loss tangent, and high insulation resistivity in Er-Doped SrTiO3 ceramics via oxygen vacancy regulation10.1021/acsami.2c12449 ↗
14. Effect of MnO on the dielectric properties of Nb-SrTiO3 ceramics for capacitor applications10.1021/acsaenm.2c00013 ↗
15. Electron-pinned defect-dipoles for high-performance colossal permittivity materials10.1038/nmat3691 ↗
16. Thermal stable and ultralow dielectric loss in (Gd0.5Ta0.5)xTi1-xO2 giant permittivity ceramics by defect engineering
17. Giant dielectric response and relaxation behavior of Bi3+/W6+ co-doped TiO2 ceramics10.1039/D3CP06154J ↗
18. Ultra–low loss tangent and giant dielectric permittivity with excellent temperature stability of TiO2 co-doped with isovalent-Zr4+/pentavalent-Ta5+ ions
19. Effect of different defects on the polarization mechanism of (Nb,Ga) codoped TiO2 single crystals10.1016/j.ceramint.2023.07.180 ↗
20. A new acceptor-donor co-doping TiO2-based ceramics with superior dielectric property and insulation performance10.1016/j.ceramint.2023.11.058 ↗
21. Enhanced dielectric properties and improved thermal stability in TiO2-based ceramics by Cu and Nb co-doping10.1016/j.ceramint.2023.10.340 ↗
22. Role of oxygen vacancy on rapid densification and giant dielectric properties of flash sintered Ca2+ and Ta5+ co-doped TiO2 ceramics
23. Effects of (Ag, Ta) Doping on the microstructure and dielectric properties of titanium dioxide functional ceramics10.1007/s11664-023-10333-w ↗
24. Effect of co-doping Nb2O5 with equal amount of Eu2O3 or In2O3 on the electrical properties of TiO2-based varistors10.1016/j.mssp.2023.107568 ↗
25. Pioneering dielectric materials of Sn-doped Nb0.025Ti0.975O2 ceramics with excellent temperature and humidity stability for advanced ceramic capacitors10.1039/D3RA08336E ↗
26. High temperature stability and low dielectric loss in colossal permittivity TiO2 based ceramics co-doped with Ag+ and Mo6+10.1016/j.matchemphys.2022.127072 ↗
27. A comparative study of microstructure and electrical properties of (Al, Nb) co-doped TiO2 ceramics by different sintering methods10.1016/j.ceramint.2023.02.226 ↗
28. Controlling dielectric properties of Nb + X (X = Al, Ga, In) co-doped and Nb-doped rutile-type TiO2 single crystals10.1039/D2TC03914A ↗
29. The effect of doping donor ions in the dielectric properties of (In0.5B0.5)0.1Ti0.9O2 (B = V, Nb, Ta) ceramics
30. Colossal permittivity and low loss in (In0.5Ta0.5)0.1Ti0.9O2 ceramics with a stable temperature range of X9D
31. Experimental study and DFT calculations of improved giant dielectric properties of Ni2+/Ta5+ co-doped TiO2 by engineering defects and internal interfaces10.1016/j.jeurceramsoc.2022.05.037 ↗
32. Improved microstructure and significantly enhanced dielectric properties of Al3+/Cr3+/Ta5+ triple-doped TiO2 ceramics by Re-balancing charge compensation10.1039/D1RA08847E ↗
33. Enhancing grain boundary contributions to improve the dielectric properties of (In0.5Nb0.5)0.05Ti0.95O2 ceramics by Bi aided sintering10.1016/j.jpcs.2024.111881 ↗
34. Low loss tangent and excellent humidity–temperature stability with DC bias independence of giant-permittivity TiO2 doped with indium tin oxide and tantalum pentoxide10.1016/j.ceramint.2023.10.245 ↗
35. Tuning enhanced dielectric properties of (Sc3+–Ta5+) substituted TiO2 via insulating surface layers10.1038/s41598-024-53046-8 ↗
36. Tuning dielectric properties in a rutile TiO2 system via synergistic design of surface structure and microstructure10.1016/j.apsusc.2022.152685 ↗
37. Electrode effects in dielectric spectroscopy measurements on (Nb+In) co-doped TiO210.1063/1.4947185 ↗
38. Very low dielectric loss and giant dielectric response with excellent temperature stability of Ga3+ and Ta5+ co-doped rutile-TiO2 ceramics10.1016/j.matdes.2017.03.037 ↗
39. Triple-doping of (Ga1/2Nb1/2)xTi1-xO2 ceramics with Al3+ for enhanced giant dielectric response with simultaneous decrease in dielectric loss10.1016/j.jeurceramsoc.2022.01.063 ↗
40. Giant dielectric permittivity of Ca and Sb-co-doped TiO2 ceramics
41. Colossal Permittivity Characteristics and Origin of (Sr, Sb) Co-Doped TiO2 Ceramics10.1149/2162-8777/ac8dc0 ↗
42. Grain-boundary engineering inducing thermal stability, low dielectric loss and high energy storage in Ta+Ho co-doped TiO2 ceramics10.1016/j.ceramint.2022.04.124 ↗
43. Giant dielectric response and relaxation behavior in (Tm + Ta) co-doped TiO2 ceramics10.1039/D1CP05348E ↗
44. Enhanced dielectric performance of Niobium and Thulium modified rutile TiO2 ceramics by defect regulation10.1016/j.ceramint.2023.01.077 ↗
45. Giant dielectric properties of terbium and niobium co-doped TiO2 ceramics driven by intrinsic and extrinsic effects10.1016/j.jallcom.2022.168095 ↗
46. Sb + Lu co-doped TiO2 ceramics with ultralow loss, high permittivity, and excellent DC bias voltage stability10.1016/j.ceramint.2023.07.005 ↗
47. Impact of hydrogenation on the structural, optical and dielectric properties of (Sb + Dy) co-doped TiO2 nanoparticles10.1007/s12034-023-02936-0 ↗
48. Enhanced Dielectric and Mechanical Performances of the (La + Nb) Codoped TiO2/Silicone Rubber Composites10.1002/pssa.202300462 ↗
49. Improvement of humidity sensing performance and dielectric response through pH variation in CaCu3Ti4O12 ceramics10.1016/j.sna.2022.113603 ↗
50. A study of structural, morphological, optical and humidity sensing properties of CaCu3Ti4O12 powders synthesized by combustion method
51. Giant and controllable humidity sensitivity achieved in (Na+Nb) co-doped rutile TiO210.1016/j.snb.2019.05.019 ↗
52. Humidity sensing behavior and its influence on the dielectric properties of (In + Nb) co-doped TiO2 ceramics10.1007/s10853-019-03945-3 ↗
53. Improving recovery performance of graphene oxide humidity sensors through pore modulation by intercalating TiO2 nanoparticles10.1016/j.inoche.2023.111445 ↗
54. Enhanced humidity sensing properties of interstitial B-doped TiO2 nanofibers10.1016/j.sna.2023.114412 ↗
55. Significantly improved dielectric properties of tin and niobium co-doped rutile TiO2 driven by Maxwell-Wagner polarization10.1016/j.jallcom.2022.166371 ↗
56. Revised Effective Ionic Radii and Systematic Studies of Interatomie Distances in Halides and Chaleogenides10.1107/S0567739476001551 ↗
57. M.N. Rahaman, Ceramic processing and sintering, 2nd ed., M. Dekker, New York, 2003.
58. Calibration of the raman spectrum to the oxygen stoichiometry of nanophase TiO210.1063/1.104274 ↗
59. Highly n-doped graphene generated through intercalated terbium atoms10.1103/PhysRevB.97.035309 ↗
60. High dielectric performance and multifarious polarizations in (Lu + Ta) co-doped TiO2 ceramics10.1080/21870764.2021.1966919 ↗
61. Effects of sintering temperature on the internal barrier layer capacitor (IBLC) structure in CaCu3Ti4O12 (CCTO) ceramics10.1016/j.jeurceramsoc.2012.03.040 ↗
62. Colossal Dielectric Behavior of Ga+Nb Co-Doped Rutile TiO210.1021/acsami.5b07467 ↗
63. Colossal permittivity with ultralow dielectric loss in In + Ta co-doped rutile TiO210.1039/C6TA08337D ↗
64. Microstructures and electrical responses of pure and chromium-doped CaCu3Ti4O12 ceramics10.1016/j.jallcom.2011.09.002 ↗
65. The contribution of doped-Al to the colossal permittivity properties of AlxNb0.03Ti0.97-xO2 rutile ceramics10.1039/C6TC00742B ↗
66. The dielectric properties for (Nb,In,B) co-doped rutile TiO2 ceramics10.1016/j.ceramint.2017.02.051 ↗