journal article·2024-05

Microstructural evolution and multi-mechanism strengthening model of nanocrystalline Al-Mg alloys

Chen Chen, Yulin Chen, Junjie Yu, Manping Liu, Jian Zhang

Publisher page

Abstract

To unravel the determinants contributing to the remarkable strength observed in nanocrystalline binary alloys, we employed a high-pressure torsion method to fabricate Al-Mg alloys with varying Mg concentrations. Mechanical property analysis indicates that, with the increasing Mg content, both the hardness and yield strength exhibit an ascending trend. Notably, the nanocrystalline Al-8Mg alloy boasted an impressive hardness and yield strength of 295 HV and 889 MPa, respectively. Comprehensive characterizations of solute distribution and microstructural evolution were conducted using X-ray diffraction, electron back-scatter diffraction, transmission electron microscopy, and atom probe tomography. We clarified the distribution mechanism of Mg atoms at grain boundaries, developed a method for the precise assessment of inhomogeneous solute distribution, and proposed a multi-mechanism strengthening model, incorporating the inhomogeneous solute distribution strengthening mechanism. The calculated results aligned well with the experimental data.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Surface Treatment and Residual Stress

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Coordinated grain boundary deformation governed nanograin annihilation in shear cycling10.1016/j.jmst.2021.01.032 ↗
2. Suppressing atomic diffusion with the Schwarz crystal structure in supersaturated Al–Mg alloys10.1126/science.abh0700 ↗
3. Thermally stable nanostructured Al-Mg alloy with relaxed grain boundaries10.1016/j.actamat.2022.117640 ↗
4. Quantifying solid-state mechanical mixing by high-pressure torsion10.1016/j.jallcom.2021.160419 ↗
5. Freezing solute atoms in nanograined aluminum alloys via high-density vacancies10.1038/s41467-022-31222-6 ↗
6. Mechanical alloying and phase transition of immiscible Al/Zn system during high-pressure torsion10.1016/S1003-6326(23)66358-7 ↗
7. Achieving ultrahigh strength in binary Al-10Mg alloy through heavy cryogenic rolling10.1016/j.jallcom.2022.166931 ↗
8. Exceptional improvement in the yield strength of AZ61 magnesium alloy via cryo-stretching and its implications on the grain growth during annealing10.1016/j.jallcom.2023.172630 ↗
9. Compared microstructure and properties of an AlZnMgCu alloy processed by high pressure sliding and high-pressure torsion10.1016/j.jallcom.2023.169060 ↗
10. Achieving superior strength and ductility in 7075 aluminum alloy through the design of multi-gradient nanostructure by ultrasonic surface rolling and aging10.1016/j.jallcom.2022.165669 ↗
11. Nanomaterials by severe plastic deformation: review of historical developments and recent advances10.1080/21663831.2022.2029779 ↗
12. The significance of spatial length scales and solute segregation in strengthening rapid solidification microstructures of 316L stainless steel10.1016/j.actamat.2019.10.044 ↗
13. Segregation of solute elements and strengthening effects of CoCrNiCux medium-entropy alloys: a combined experimental and simulation study10.1016/j.jallcom.2023.169015 ↗
14. Solute segregation induced stabilizing and strengthening effects on Ni Σ3 [110](111) symmetrical tilt grain boundary in nickel-based superalloys10.1016/j.jmrt.2021.01.066 ↗
15. Influence of alloying element segregation at grain boundary on the microstructure and mechanical properties of Mg-Zn alloy10.1016/j.matdes.2022.111322 ↗
16. Atomic simulations of interactions between edge dislocations and a twist grain boundary in Mg10.2320/matertrans.MT-M2020011 ↗
17. Understanding formation of Mg-depletion zones in Al-Mg alloys under high pressure torsion10.1016/j.jmst.2018.11.017 ↗
18. Grain boundary energy effect on grain boundary segregation in an equiatomic high-entropy alloy
19. Heterostructured materials10.1016/j.pmatsci.2022.101019 ↗
20. A review of advances in modeling of conventional machining processes: from merchant to the present
21. Microstructural evolution, strengthening and thermal stability of an ultrafine-grained Al–Cu–Mg alloy10.1016/j.actamat.2016.02.050 ↗
22. Achieving highly strengthened Al–Cu–Mg alloy by grain refinement and grain boundary segregation10.1016/j.msea.2020.139668 ↗
23. Phase transformation in Al/Zn multilayers during mechanical alloying10.1007/s40195-023-01586-9 ↗
24. Micro-mechanical and tribological properties of aluminum-magnesium nanocomposites processed by high-pressure torsion10.1016/j.msea.2016.12.067 ↗
25. A magnesium-aluminium composite produced by high-pressure torsion10.1016/j.jallcom.2019.07.007 ↗
26. Historical studies by polish scientist on ultrafine-grained materials by severe plastic deformation10.2320/matertrans.MF201921 ↗
27. Accurate determination of grain properties using three-dimensional synchrotron X-ray diffraction: a comparison with EBSD10.1016/j.matchar.2020.110753 ↗
28. Characterizing deformed ultrafine-grained and nanocrystalline materials using transmission Kikuchi diffraction in a scanning electron microscope10.1016/j.actamat.2013.09.026 ↗
29. Review on superior strength and enhanced ductility of metallic nanomaterials10.1016/j.pmatsci.2018.02.002 ↗
30. The influence of alloying in stabilizing a faceted grain boundary structure10.1016/j.actamat.2020.09.085 ↗
31. Atomic number dependence of Z contrast in scanning transmission electron microscopy10.1038/s41598-018-30941-5 ↗
32. Microstructure evolution, texture and strengthening mechanism of Al–Mg alloy with a square pyramid part during hot gas bulging with clustering balls10.1016/j.jallcom.2022.165055 ↗
33. Effect of rolling temperature on mechanical properties and corrosion resistance of Al-Cu-Mg-Ag alloy10.1016/j.jallcom.2021.163168 ↗
34. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗
35. Altered ageing behaviour of a nanostructured Mg-8.2 Gd-3.8 Y-1.0 Zn-0.4 Zr alloy processed by high pressure torsion10.1016/j.actamat.2018.04.003 ↗
36. Concurrent strengthening of ultrafine-grained age-hardenable Al-Mg alloy by means of high-pressure torsion and spinodal decomposition10.1016/j.actamat.2017.04.002 ↗
37. Significantly enhanced grain boundary Zn and Ca co-segregation of dilute Mg alloy via trace Sm addition10.1016/j.msea.2021.142259 ↗
38. Grain boundary doping strengthens nanocrystalline copper alloys10.1016/j.scriptamat.2012.06.031 ↗
39. Quantitative analysis of grain boundary diffusion, segregation and precipitation at a sub-nanometer scale10.1016/j.actamat.2021.117522 ↗
40. Atomic-scale inhomogeneous solute distribution in an ultrahigh strength nanocrystalline Al-8 Mg aluminum alloy10.1016/j.matchar.2023.112706 ↗
41. Effects of strain rate on mechanical properties, microstructure and texture of Al—Mg—Si—Cu alloy under tensile loading10.1016/S1003-6326(19)65177-0 ↗
42. Interaction between diffusion and chemical stresses10.1016/j.msea.2005.05.117 ↗
43. Strength enhancement induced by grain boundary solute segregations in ultrafine-grained alloys10.1016/j.ijplas.2019.07.013 ↗
44. A modified Hall-Petch relationship for nanocrystalline materials10.1016/0965-9773(93)90184-D ↗
45. On the origin of the extremely high strength of ultrafine-grained Al alloys produced by severe plastic deformation10.1016/j.scriptamat.2010.07.014 ↗
46. Anderson · 2017
47. Sc/Zr ratio-dependent mechanisms of strength evolution and microstructural thermal stability of multi-scale hetero-structured Al–Mg–Sc–Zr alloys10.1016/j.jmst.2022.09.009 ↗
48. Deformation structures and strengthening mechanisms in an Al-Cu alloy subjected to extensive cold rolling10.1016/j.msea.2017.07.001 ↗
49. Hull · 2011
50. Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy10.1016/j.actamat.2013.09.042 ↗
51. Structural evolutions of metallic materials processed by severe plastic deformation10.1016/j.mser.2018.06.001 ↗
52. Analysis of excitation pulsed signal propagation for atom probe tomography system10.2528/PIERL14042403 ↗
53. A unified description of solid solution creep strengthening in Al–Mg alloys10.1016/j.msea.2012.04.080 ↗
54. Tuning element distribution, structure and properties by composition in high-entropy alloys10.1038/s41586-019-1617-1 ↗
55. A novel, single phase, non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility10.1016/j.scriptamat.2013.09.030 ↗
56. Predicting grain refinement by cold severe plastic deformation in alloys using volume averaged dislocation generation10.1016/j.actamat.2009.08.006 ↗
57. The thermodynamic properties of solid Al− Mg alloys10.1007/BF03037810 ↗
58. A model of grain refinement and strengthening of Al alloys due to cold severe plastic deformation10.1080/14786435.2011.616865 ↗
59. The mechanism of plastic deformation of crystals. Part I.—theoretical
60. The mechanism of plastic deformation of crystals. Part II.—comparison with observations