Wear behavior of novel abradable porous Yb2Si2O7-CaF2-PHB coatings fabricated by atmospheric plasma spraying
Source abstract
Abstract
The abradable sealing coatings (ASCs) matched with ceramic matrix composites (CMCs) can improve engine efficiency and reduce fuel consumption. A study of plasma-sprayed porous Yb 2Si 2O 7-20 vol% CaF 2 with various contents of poly-p-hydroxybenzoate (PHB) as ASCs compatible with CMCs is reported. The microstructure and phase composition, Rockwell hardness, wear behaviors and abradability of the coatings were comparatively studied. The results show that the porosity increased and the hardness decreased as the PHB content was increased, and the coating containing 20 vol% PHB had a minimum hardness of about 65.2 HR45Y and a maximum porosity of about 39.2%. The friction coefficients and IDR values decreased, wear depth and volume wear rates of the coatings effectively improved with the increase of porosity. The wear mechanisms were analyzed based on the observation of the worn surfaces. This work might provide some guidance for the design and application of ASCs for CMCs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Zirconia-based abradable coatings fabricated on single-crystal superalloy: Microstructure, residual stress and mechanical properties10.1016/j.jallcom.2022.164537 ↗
2. Tribological characterization of plasma-sprayed CoNiCrAlY-BN abradable coatings10.1007/s11666-013-9998-4 ↗
3. Modelling route for abradable coatings, Surface and Coatings Technology
4. Stabilization of a novel mixed solution precursor used for preparing YSZ abradable sealing coatings10.1016/j.colsurfa.2018.11.053 ↗
5. Investigating material removal mechanism of Al-Si base abradable coating in labyrinth seal system10.1016/j.wear.2019.01.034 ↗
6. Development of abradable and rub-tolerant seal materials for application in centrifugal compressors and steam turbines10.1016/S1350-4789(04)00451-9 ↗
7. Porosity analysis and oxidation behavior of plasma sprayed YSZ and YSZ/LaPO4 abradable thermal barrier coatings10.1016/j.ceramint.2016.07.057 ↗
8. Evaluation of abradable seal coating mechanical properties10.1016/j.wear.2009.03.044 ↗
9. A novel method to evaluate the densification of abradable seal coatings10.1016/j.matlet.2020.128401 ↗
10. Lightweight epoxy-based abradable seal coating with high bonding strength10.1016/j.jmst.2020.05.077 ↗
11. Preparation and characterization of YSZ abradable sealing coating through mixed solution precursor plasma spraying10.1016/j.ceramint.2019.03.058 ↗
12. Evolution of the residual stress in porous ceramic abradable coatings under thermal exposure10.1016/j.surfcoat.2020.125915 ↗
13. Excellently abradable seal coating with spherical closed-pore for next-generation aero-engine application10.1016/j.matlet.2021.131024 ↗
14. Tribological performance and phase transition of MAX-phase/YSZ abradable seal coating produced by air plasma spraying10.1016/j.ceramint.2021.10.210 ↗
15. High temperature abradable sealing coating for SiCf/SiC ceramic matrix composites10.1016/j.ceramint.2022.09.141 ↗
16. Advanced structural ceramics in aerospace propulsion10.1038/nmat4687 ↗
17. Advanced Ceramic Materials for High Temperature Applications10.1002/adem.200500269 ↗
18. SiC-matrix composites: Nonbrittle ceramics for thermo-structural application10.1111/j.1744-7402.2005.02009.x ↗
19. Fabrication and characterization of 8YSZ ceramic based abradable seal coatings by atmospheric plasma spraying10.1016/j.ceramint.2020.07.119 ↗
20. EB-PVD processing of pyrochlore-structured La2Zr2O7-based TBCs10.1016/j.surfcoat.2003.08.068 ↗
21. Overview on advanced thermal barrier coatings, Surface and Coatings Technology
22. Microstructure and thermal properties of atmospheric plasma-sprayed Yb2Si2O7 coating10.1007/s11666-016-0482-9 ↗
23. Influence of phase composition on microstructure and thermal properties of ytterbium silicate coatings deposited by atmospheric plasma spray10.1016/j.jeurceramsoc.2018.04.047 ↗
24. Water vapor corrosion behaviors of plasma sprayed ytterbium silicate coatings10.1016/j.ceramint.2020.07.324 ↗
25. Water vapor corrosion behaviors of plasma sprayed RE2SiO5 (RE = Gd, Y, Er) coatings10.1016/j.corsci.2020.108529 ↗
26. Fabrication and characterization of Yb2Si2O7-based composites as novel abradable sealing coatings10.1016/j.ceramint.2021.05.029 ↗
27. Preparation and Characterization of Self-Lubricating CaF2@ZrO2/YSZ Composite Coating10.1007/s11666-022-01424-x ↗
28. Thermal-mechanical driven oxidation of NiCr-Cr3C2-BaF2/CaF2 composite coating at high temperature10.1016/j.corsci.2022.110698 ↗
29. The synergistic effects of CaF2 and Au lubricants on tribological properties of spark-plasma-sintered ZrO2(Y2O3) matrix composites10.1016/S0921-5093(04)00965-7 ↗
30. Self-lubrication of Al2O3/TiC/CaF2 ceramic composites in sliding wear tests and in machining processes10.1016/j.matdes.2005.12.003 ↗
31. Effect of NiCr Clad BaF2·CaF2 Addition on Wear Performance of Plasma Sprayed Chromium Carbide-Nichrome Coating10.1007/s11666-009-9462-7 ↗
32. Friction and wear behaviour and abradability of abradable seal coating10.1016/S0043-1648(99)00093-9 ↗
33. Influence of phase composition on thermal aging behavior of plasma sprayed ytterbium silicate coatings10.1016/j.ceramint.2018.06.200 ↗
34. Tribological properties of ZrO2 (Y2O3)–Mo–BaF2/CaF2 composites at high temperatures10.1016/j.triboint.2011.09.008 ↗
35. Microstructures and tribological properties of plasma sprayed WC–Co–Cu–BaF2/CaF2 self-lubricating wear resistant coatings10.1016/j.apsusc.2010.03.006 ↗
36. Tribological properties of plasma sprayed TiC-graphite composite coatings10.15541/jim20210521 ↗
37. High-Temperature Wear and Abradable Behaviors of Yb2Si2O7-CaF2 Composite Coatings Fabricated by Atmospheric Plasma Spray
38. Wear and friction behavior of CrTiN/TiCN and CrTiN/CrCN multilayer composite coatings10.1016/j.ceramint.2022.01.254 ↗
39. Tribological investigation of Si3N4-hBN on HXLPE bearing couple: Effects of sliding velocity and contact load10.1016/j.ceramint.2018.12.112 ↗
40. Investigation on high-speed rubbing behavior between abrasive coatings and Al/hBN abradable seal coatings10.1016/j.wear.2020.203389 ↗
41. Exploring the influences of the counterpart materials on friction and wear behaviors of atmospheric plasma-sprayed YSZ coating10.1016/j.ceramint.2022.06.214 ↗
42. Tribological performances of epoxy resin composite coatings using hexagonal boron nitride and cubic boron nitride nanoparticles as additives10.1016/j.cplett.2019.136646 ↗
43. Effect of APS process parameters on high-temperature wear behavior of nickel–graphite abradable seal coatings10.1016/j.surfcoat.2017.05.004 ↗
44. Preparation and characterization of atmospheric plasma-sprayed NiCr/Cr3C2–BaF2·CaF2 composite coating10.1016/j.surfcoat.2009.03.027 ↗
45. Effect of load and sliding speed on friction and wear behavior of silver/h-BN containing Ni-base P/M composites10.1016/j.wear.2010.08.013 ↗
46. The influence of size and distribution of graphite on the friction and wear behavior of Ni–graphite coatings10.1016/j.surfcoat.2014.04.063 ↗
47. Comparison of microstructure and tribological properties of plasma-sprayed TiN, TiC and TiB2 coatings10.1016/j.surfcoat.2019.05.071 ↗
48. Composition versus friction and wear behavior of plasma sprayed WC–(W,Cr)2C–Ni/Ag/BaF2–CaF2 self-lubricating composite coatings for use up to 600 °C10.1016/j.apsusc.2012.08.060 ↗
49. Further investigation on the tribological behavior of Al2O3–20Ag20CaF2 composite at 650 °C10.1023/A:1019132328220 ↗
50. Tribological properties of spark-plasma-sintered ZrO2(Y2O3)–CaF2–Ag composites at elevated temperatures10.1016/j.wear.2004.10.007 ↗
51. Comparative Study on Wear Behavior of Plasma-Sprayed TiC Coating Sliding Against Different Counterparts10.1007/s11666-020-01036-3 ↗