journal article·2024-03

Effect of Si addition on microstructure and performance of a biomedical Ti-Nb-Zr-Ta alloy prepared via powder hot extrusion

Q.Y. Ji, Y. Long, C. Yang, W.G. Chen

Publisher page

Abstract

In this study, TNZT-xSi ((Ti 53Nb 35Zr 7Ta 5) 100‐xSi x , x = 0, 1.4, 2.3, wt.%) alloys are prepared by powder hot extrusion. The effect of Si addition on microstructure, mechanical properties, corrosion resistance and in vitro apatite formation ability of TNZT-xSi alloys is investigated. The as-extruded TNZT alloy mainly consists of elongated BCC grains. The addition of Si leads to the precipitation of fine (Ti, Zr) 2 Si (S2) particles from the BCC matrix. With the increase of Si content, the volume fraction of recrystallized grains rises significantly, and the microstructure of extruded alloys tends to transform from elongated to equiaxed grains. It’s indicated that the introduction of S2 particles activates the dynamic recrystallization process during hot extrusion and results in an obvious reduction in the overall grain size. Compared with the TNZT-0Si base alloy, the tensile strength of TNZT-2.3Si alloy is improved from 726 MPa to 983 MPa, with the elongation declining from 28.0% to 9.5%. The TNZT-xSi alloys exhibit higher corrosion potential (E corr) and lower corrosion current density (I corr ) than Ti-6Al-4V alloy in simulated body fluid, due to the formation of more stable oxides such as Nb 2O 5, ZrO 2 and Ta 2O 5. Furthermore, TNZT-xSi alloys have apatite formation ability superior to Ti-6Al-4V. These results suggest that TNZT-xSi alloys may have the potential as a biomaterial for implant applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Biomedical materials for new millennium: perspective on the future10.1179/026708301101510762 ↗
2. Tailoring the microstructure and mechanical properties of metastable Ti–29Nb–13Ta-4.6Zr alloy for self-expansible stent applications10.1016/j.jallcom.2019.06.049 ↗
3. Review on titanium and titanium based alloys as biomaterials for orthopaedic applications10.1016/j.msec.2019.04.064 ↗
4. Accommodative {332}〈113〉 primary and secondary twinning in a slightly deformed β-type Ti-Mo titanium alloy10.1016/j.msea.2016.12.025 ↗
5. Selective laser melting of low-modulus biomedical Ti-24Nb-4Zr-8Sn alloy: Effect of laser point distance10.4028/www.scientific.net/KEM.520.226 ↗
6. Selective laser melting of titanium alloy with 50 wt% tantalum: Microstructure and mechanical properties10.1016/j.jallcom.2015.11.141 ↗
7. Programming crystallographic orientation in additive‐manufactured beta‐type titanium alloy
8. Titanium alloys in total joint replacement-a materials science perspective10.1016/S0142-9612(97)00146-4 ↗
9. High-strength metastable beta-titanium alloys for biomedical applications10.1007/s11837-004-0253-9 ↗
10. Microstructure, texture evolution and mechanical properties of cold rolled Ti-32.5Nb-6.8Zr-2.7Sn biomedical beta titanium alloy10.1016/j.jmst.2017.04.017 ↗
11. Characterization, corrosion behavior, cellular response and in vivo bone tissue compatibility of titanium-niobium alloy with low Young’s modulus10.1016/j.msec.2015.10.062 ↗
12. Increasing strength of a biomedical Ti-Nb-Ta-Zr alloy by alloying with Fe, Si and O10.1016/j.jmbbm.2017.03.026 ↗
13. Effect of alloying elements on the compressive mechanical properties of biomedical titanium alloys: a systematic review10.1021/acsomega.2c02096 ↗
14. Overcoming the strength–ductility trade-off by tailoring grain-boundary metastable Si-containing phase in β-type titanium alloy10.1016/j.jmst.2020.06.053 ↗
15. Improved mechanical and wear properties of Ti−35Nb−5Ta−7Zr−xSi alloys fabricated by selective electron beam melting for biomedical application10.1007/s11771-022-5203-6 ↗
16. Newly developed Ti–Nb–Zr–Ta–Si–Fe biomedical beta titanium alloys with increased strength and enhanced biocompatibility10.1016/j.msec.2015.11.043 ↗
17. Effect of Nb addition on microstructure evolution and nanomechanical properties of a glass-forming Ti-Zr-Si alloy10.1016/j.intermet.2013.11.010 ↗
18. Evolution of inhomogeneous reinforced structure in TiBw/Ti-6AL-4V composite prepared by pre-sintering and canned β extrusion10.1016/j.matdes.2015.09.014 ↗
19. Dependence of microstructure and mechanical properties on hot-extrusion temperatures of the developed high-strength Cu40Zn-CrFeTiSn brass by powder metallurgy10.1016/j.msea.2012.08.062 ↗
20. Microstructural evolution of rapidly solidified ZK60 powders during extrusion10.1016/S1005-0302(11)60042-X ↗
21. Feasibility of producing Ti-6Al-4V alloy for engineering application by powder compact extrusion of blended elemental powder mixtures10.1016/j.jallcom.2016.10.282 ↗
22. Fabrication of Al/AlN in-situ nanocomposite through planetary ball milling and hot extrusion of Al/BN: microstructural evaluation and mechanical behavior10.1016/j.jallcom.2018.07.256 ↗
23. Effect of lattice distortion on solid solution strengthening of BCC high-entropy alloys10.1016/j.jmst.2017.07.013 ↗
24. Biomedical TiNbZrTaSi alloys designed by d-electron alloy design theory10.1016/j.matdes.2015.06.176 ↗
25. Optimization of strength and ductility in an as-extruded Cu–15Ni–8Sn alloy by the additions of Si and Ti10.1016/j.jallcom.2020.153759 ↗
26. A study on microstructural evolution and dynamic recrystallization during isothermal deformation of a Ti-modified austenitic stainless steel10.1007/s11661-010-0517-7 ↗
27. Relationship of particle stimulated nucleation, recrystallization and mechanical properties responding to Fe and Si contents in hot-extruded 7055 aluminum alloys10.1016/j.jmst.2019.07.014 ↗
28. Modeling of texture evolution in the deformation zone of second-phase particles10.1016/j.actamat.2008.10.052 ↗
29. The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials10.1016/j.pmatsci.2017.10.004 ↗
30. Current issues in recrystallization: a review10.1016/S0921-5093(97)00424-3 ↗
31. A variational approach to the theory of the elastic behiviour of multiphase materials10.1016/0022-5096(63)90060-7 ↗
32. Low-modulus biomedical Ti–30Nb–5Ta–3Zr additively manufactured by Selective Laser Melting and its biocompatibility10.1016/j.msec.2018.11.077 ↗
33. Increasing strength of a biomedical Ti-Nb-Ta-Zr alloy by alloying with Fe, Si and O10.1016/j.jmbbm.2017.03.026 ↗
34. Microstructural and mechanical characterization of biomedical Ti–Nb–Zr(–Ta) alloys10.1016/j.msea.2006.06.013 ↗
35. High-strength metastable beta-titanium alloys for biomedical applications10.1007/s11837-004-0253-9 ↗
36. Laser deposition and deformation behavior of Ti–Nb–Zr–Ta alloys for orthopedic implants10.1016/j.jmbbm.2012.08.014 ↗
37. Change in microstructures and mechanical properties of biomedical Ti-Nb-Ta-Zr system alloy through cross-rolling10.2320/matertrans.MRA2008040 ↗
38. Determination of (C11-C12) in Ti–36Nb–2Ta–3Zr–0.3O (wt%) (Gum metal)10.1016/j.scriptamat.2008.05.022 ↗
39. Deformation-induced ω phase in modified Ti–29Nb–13Ta–4.6Zr alloy by Cr addition10.1016/j.actbio.2013.04.032 ↗
40. Ultrafine-grained Ti-Nb-Ta-Zr alloy produced by ECAP at room temperature10.1007/s10853-014-8337-6 ↗
41. A design of TiZr-rich body-centered cubic structured multi-principal element alloys with outstanding tensile strength and ductility10.1016/j.msea.2021.141135 ↗
42. Phase selection-oriented mechanical properties tailoring for β-type TiNbZrTaSi alloy fabricated by laser powder bed fusion
43. Fatigue and corrosion resistance of low modulus Ti-35Nb-7Zr-5Ta-0.35O beta Ti alloy for orthopedic implant applications
44. Influence of niobium and zirconium alloying additions on the anodic dissolution behavior of activated titanium in HCl solutions10.1149/1.1337605 ↗
45. Surface analysis and corrosion resistance of a new titanium base alloy in simulated body fluids10.1016/j.corsci.2012.08.042 ↗
46. Study of the in vitro corrosion behavior and biocompatibility of Zr-2.5Nb and Zr-1.5Nb-1Ta (at%) crystalline alloys10.1007/s10856-011-4301-z ↗
47. XPS and EIS study of the passive film formed on orthopaedic Ti-6Al-7Nb alloy in Hank’s physiological solution10.1016/j.electacta.2007.12.041 ↗
48. Study of dry and electrogenerated Ta2O5 and Ta/Ta2O5/Pt structures by XPS10.1016/S0921-5107(98)00177-9 ↗
49. Comparative corrosion study of Ti-Ta alloys for dental applications10.1016/j.actbio.2009.05.037 ↗
50. How useful is SBF in predicting in vivo bone bioactivity?10.1016/j.biomaterials.2006.01.017 ↗
51. Correlations between the in vitro and in vivo bioactivity of the Ti/HA composites fabricated by a powder metallurgy method10.1016/j.actbio.2008.04.015 ↗
52. Transmission electron microscopic observation of glass-ceramic A-W and apatite layer formed on its surface in a simulated body fluid10.2109/jcersj.103.449 ↗
53. Bonelike hydroxyapatite induction by a gel‐derived titania on a titanium substrate10.1111/j.1151-2916.1994.tb05407.x ↗