journal article·2024-03

Improvement of LiFePO4 electrochemical properties by inducer control of primary particle agglomeration morphology

Chengyu Pan, Haoyan Yin, Fengze Pan, XinYue He, Yuqiang Zhai, Yanmin Gao

Publisher page

Abstract

We successfully prepare LiFePO 4 nanosheets with a primary particle linearity of only 50–80 nm with the {010} facet as the main exposed surface by using the mixed-solvent method, and control their agglomeration morphology by using ethylene glycol, diethylene glycol, and triethylene glycol (EG, DEG, and TEG) as the inducing agents, which solves the problem of the irregular agglomeration of the nanoparticles to a large extent. The obtained secondary particles have regular morphology, consistent particle size, staggered stacking between nanosheets, and the resulting stacked pores greatly increase the active sites of the material. In addition, due to the different molecular structures of the inducer of LiFePO 4 chelating degree of deviation, as a way to achieve the purpose of controlling the thickness of the carbon layer on the surface of LiFePO 4. The discharge specific capacity of the spiny spherical secondary particles prepared with EG can reach 168.5 mAh g −1 at 0.2 C, which is close to its theoretical capacity. Due to the nano effect of primary particles, the material is in full contact with the electrolyte and exhibits successively 149.8, 125.9 and 114.5 mAh g −1 even at high multiplicities (2 C, 5 C, 10 C).
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Phospho-olivines as positive-electrode materials for rechargeable lithium batteries
2. Development and challenges of LiFePO4 cathode material for lithium-ion batteries10.1039/C0EE00029A ↗
3. Hydroxyl defects in LiFePO(4) cathode material: DFT+U and an experimental study10.1021/acs.inorgchem.0c03241 ↗
4. Battery materials for ultrafast charging and discharging10.1038/nature07853 ↗
5. Hydrothermally synthesized LiFePO4 crystals with enhanced electrochemical properties: simultaneous suppression of crystal growth along [010] and antisite defect formation10.1039/c2cp23433e ↗
6. Monodisperse porous LiFePO4 microspheres for a high power Li-ion battery cathode10.1021/ja1110464 ↗
7. Co/Ti co-substituted layered LiNiO2 prepared using a concentration gradient method as an effective cathode material for Li-ion batteries10.1016/j.jpowsour.2017.10.021 ↗
8. Morphology-controlled LiFePO4 cathodes by a simple polyol reaction for Li-ion batteries10.1016/j.matchar.2014.01.004 ↗
9. ZnO-doped LiFePO4 cathode material for lithium-ion battery fabricated by hydrothermal method10.1016/j.matchemphys.2013.06.012 ↗
10. Effect of Mn2+-doping in LiFePO4 and the low temperature electrochemical performances10.1016/j.jallcom.2010.10.083 ↗
11. Effects of Nb-doped on the structure and electrochemical performance of LiFePO4/C composites10.1016/j.jssc.2013.11.032 ↗
12. Understanding the shifts in the redox potentials of olivine LiM1-yMyPO4 (M) Fe, Mn,Co, and Mg) solid solution cathodes
13. Improved electrochemical performance of LiFePO4/C cathode via Ni and Mn co-doping for lithium-ion batteries10.1016/j.jpowsour.2013.03.035 ↗
14. Effect of different carbon sources on electrochemical performance of LiFePO4/C10.20964/2020.11.57 ↗
15. Effect of different carbon and nitrogen co-doping on electrochemical performance of LiFePO4/CN10.1016/j.matlet.2022.132713 ↗
16. Synthesis of LiFePO4 nanoparticles in polyol medium and their electrochemical properties10.1149/1.2218308 ↗
17. Graphene-decorated carbon-coated LiFePO4 nanospheres as a high-performance cathode material for lithium-ion batteries10.1016/j.carbon.2017.10.101 ↗
18. High performance LiFePO4 microsphere composed of nanofibers with an alcohol-thermal approach10.1039/c3ta01566a ↗
19. General facet-controlled synthesis of single-crystalline {010}-oriented LiMPO4 (M = Mn, Fe, Co) nanosheets10.1021/acs.chemmater.7b04514 ↗
20. Polyethylene glycol-induced growth of LiFePO4 platelets with preferentially exposed (010) plane as a cathode material for lithium ion battery10.1016/j.jelechem.2016.05.041 ↗
21. Solvothermal synthesis of monodisperse micro-nanostructure starfish-like porous LiFePO4 as cathode material for lithium-ion batteries10.1016/j.jallcom.2015.08.221 ↗
22. Morphology-controllable solvothermal synthesis of nanoscale LiFePO4 in a binary solvent10.1007/s11434-012-5019-0 ↗
23. Defect-free solvothermally assisted synthesis of microspherical mesoporous LiFePO4/C10.1039/c2ra22965j ↗
24. Hydrothermal synthesis of lithium iron phosphate10.1016/j.elecom.2006.03.021 ↗
25. Improvement of electrochemical properties of lithium iron phosphate cathode by rare earth oxides modification
26. Metallogels from coordination complexes, organometallic, and coordination polymers10.1002/asia.201600814 ↗
27. Unconventional approaches in coordination chemistry and organometallic reactivity10.1021/acsomega.0c05873 ↗
28. Analysis of membrane fouling by Brunauer-Emmet-Teller nitrogen adsorption/desorption technique10.1038/s41598-020-59994-1 ↗
29. Soil texture effects on multifractal behaviour of nitrogen adsorption and desorption isotherms10.1016/j.biosystemseng.2018.01.009 ↗
30. Nanomaterials for rechargeable lithium batteries10.1007/978-3-319-32023-6_13 ↗
31. Highly efficient synthesis of nano LiMn0.90Fe0.10PO4/C composite via mechanochemical activation assisted calcination10.1016/j.ceramint.2023.02.221 ↗
32. Engineering 3D bicontinuous hierarchically macro-mesoporous LiFePO4/C nanocomposite for lithium storage with high rate capability and long cycle stability10.1038/srep25942 ↗
33. Fluorine doped carbon coating of LiFePO4 as a cathode material for lithium-ion batteries10.1016/j.cej.2019.122371 ↗