Peculiar β-Li2TiO3: Eu3+ red light emitting dominated by electric dipole transition: Asymmetric lattice point regulation and luminescence performance
Source abstract
Abstract
In order to obtain red phosphor with high color purity, β-Li 2TiO 3: Eu 3+ dominated by electric dipole transition was prepared by the hydrothermal method. Eu 3+ doping concentration (< 0.5 mol%) and calcination time (> 12 h) can regulate the phase purity, supercell development, asymmetric lattice point configuration and the luminescence performance. Under excitation at 394 nm, β-Li 2TiO 3: Eu 3+ emits narrow band 618 nm red light due to that Eu 3+ replaces Li + at the relatively active Li1 position, and the 5D 0 → 7F 2 electric dipole transition dominates. Calcined at 600 °C for 36 h with Eu 3+ doped concentration of 0.5 mol%, the luminescence performance of β-Li 2TiO 3: Eu 3+ is superior, of which the lifetime is 0.64 ms, the color coordinates x = 0.63, y = 0.37, the color temperature of 987 K, the color rendering index of 82, and the red color purity of 99.7%. The electric dipole transition line intensity parameters Ω 2 and Ω 4 are 8.01 × 10 −20 cm 2 and 0.62 × 10 −20 cm 2, respectively, yielding Ω 2/Ω 4 of 12.9. The fluorescence branch ratio of 5D 0 → 7F 2 is 82.9%, and the quantum efficiency can reach 92%, which is superior within similar materials.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Lanthanide and Transition Metal Complexes · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Rare earth-free luminescent materials for WLEDs: recent progress and perspectives
2. Excitation expansion in the high-energy UV region for Dy3+-doped medium-temperature molten silicate glass phosphors10.1111/jace.18807 ↗
3. Excitability cultivation in high-energy UV region for Dy3+ in phosphate glass phosphors10.1016/j.ceramint.2023.02.032 ↗
4. Energy transfer mediated single-phased white light emission in Bi3+-Eu3+ codoped Ba3YGa2O7.5 for WLED10.1016/j.jallcom.2022.166419 ↗
5. Mixed microscopic Eu2+ occupancies in the next-generation red LED phosphor Sr[Li2Al2O2N2]:Eu2+ (SALON:Eu2+)10.1002/adom.202202732 ↗
6. Flexible perovskite light-emitting diodes: Progress, challenges and perspective10.1007/s40843-022-2197-4 ↗
7. Prevailing strategies to tune emission color of lanthanide-activated phosphors for WLED applications10.1002/adom.201900319 ↗
8. Tuning emission color of Eu2+-activated phosphor through phase segregation10.1016/j.cej.2022.139640 ↗
9. Novel double perovskite Ca2Gd0.5Nb1-xW5x/6O6: 0.5 Eu3+ red phosphors with excellent thermal stability and high color purity for white LEDs10.1016/j.cej.2022.140901 ↗
10. Enhanced photoluminescence emission and thermal stability from introduced cation disorder in phosphors10.1021/jacs.7b04338 ↗
11. Cuboid-size-controlled color-tunable Eu-doped alkali-lithosilicate phosphors10.1021/acs.chemmater.9b04861 ↗
12. Improved thermal stability of luminescence by anion modification in Na2Y(MoO4)(PO4): Tb3+, Eu3+ red-emitting phosphors10.1016/j.jallcom.2020.155438 ↗
13. Stabilizing fluoride phosphors: surface modification by atomic layer deposition10.1021/acs.chemmater.9b01491 ↗
14. A facile self-passivation strategy for improving moisture-resistance of fluoride red phosphors without surface modification10.1016/j.optmat.2021.111184 ↗
15. Systematic treatment and evaluation of nitride phosphor with hybrid layer modification against moisture degradation10.1016/j.cej.2021.132789 ↗
16. Recent research progress of Mn4+-doped A2MF6 (A = Li, Na, K, Cs, or Rb; M = Si, Ti, Ge, or Sn) red phosphors based on a core-shell structure10.3390/nano13030599 ↗
17. A novel green-emitting luminescent materials with broad-band emission for high-quality warm white LED indoor lighting10.1111/jace.17381 ↗
18. Optical absorption and photoluminescence studies of Eu3+-doped phosphate and fluorophosphates glasses10.1016/j.jlumin.2006.05.010 ↗
19. Photoluminescence and Judd-Ofelt analysis of Eu3+ doped akermanite silicate phosphors for solid state lighting10.1016/j.optmat.2022.112945 ↗
20. Photoluminescence down-shifting studies of thermally stable Eu3+ ions doped borosilicate glasses for visible red photonic device applications10.1016/j.jnoncrysol.2021.121184 ↗
21. Structural, photoluminescence and Judd-Ofelt analysis of red-emitting Eu3+ doped strontium hexa-aluminate nanophosphors for lighting application10.1016/j.optmat.2021.111542 ↗
22. Development of red-emitting Ba2LaSbO6: Mn4+ phosphors for latent fingerprint detection10.1016/j.ceramint.2021.03.287 ↗
23. Preparation, characterization, and application of a red phosphor Ca2InTaO6: Eu3+ in w-LEDs and latent fingerprint detection10.1016/j.jallcom.2023.168715 ↗
24. An efficient far-red emission Sr2InSbO6: Mn4+, M (M = Li+, Na+, and K+) phosphors for plant cultivation LEDs10.1111/jace.18115 ↗
25. Sol-gel synthesis, structure and luminescence properties of Ba2ZnMoO6: Eu3+ phosphors10.1016/j.materresbull.2014.12.041 ↗
26. Double perovskite Ca2LuTaO6: Eu3+ red-emitting phosphors: synthesis, structure and photoluminescence characteristics10.1016/j.jallcom.2019.06.260 ↗
27. Crystal structure and magnetic-dipole emissions of Sr2CaWO6: RE3+ (RE = Dy, Sm and Eu) phosphors10.1016/j.jallcom.2017.12.302 ↗
28. A new perovskite type Ba2YZrO6: Eu3+ red phosphor with cubical morphology for WLEDs applications10.1016/j.jlumin.2020.117561 ↗
29. A novel double perovskite La2ZnTiO6: Eu3+ red phosphor for solid-state lighting: Synthesis and optimum luminescence10.1016/j.optlastec.2017.04.025 ↗
30. Synthesis and photoluminescence of double perovskite La2LiSbO6: Ln3+ (Ln = Eu, Tb, Tm, Sm, Ho) phosphors and enhanced luminescence of La2LiSbO6: Eu3+ red phosphor via Bi3+ doping for white light emitting diodes10.1016/j.jallcom.2019.02.132 ↗
31. Eu3+-doped double perovskite-based phosphor-in-glass color converter for high-power warm w-LEDs10.1016/j.jallcom.2017.11.242 ↗
32. Enhanced red emission of Eu3+-activated phosphors via the special design in a-sites of double perovskite structure10.1016/j.optlastec.2020.106603 ↗
33. Ternary type BaY2ZnO5: Eu3+ deep-red phosphor for possible latent fingerprint, security ink and WLED applications10.1016/j.ceramint.2021.07.185 ↗
34. Influence of different flux-materials on phase structure, morphology, photoluminescence, thermal stability, and cathodoluminescence in Ba2La0.9Eu0.1SbO6 phosphors10.1016/j.jallcom.2021.163281 ↗
35. Luminescence properties, crystal structure and high thermal stable of (Gd0.85-xLux)2MgTiO6: Eu3+ red phosphors10.1016/j.optmat.2020.110526 ↗
36. Supercell structure, preparation and application of β-Li2TiO3
37. Crystal growth and structure refinement of monoclinic Li2TiO310.1016/j.materresbull.2008.03.015 ↗
38. Monoclinic Li2TiO3 nano-particles via hydrothermal reaction: processing and structure10.1016/j.ceramint.2013.07.097 ↗
39. Three-dimensional visualization in powder diffraction10.4028/www.scientific.net/SSP.130.15 ↗
40. VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data10.1107/S0021889811038970 ↗
41. Vacancy and substitution defects of β-Li2TiO3 prepared by hydrothermal method10.1246/cl.130951 ↗
42. X-ray diffraction and Raman studies on Ho: Eu2O310.1016/j.molstruc.2016.08.077 ↗
43. Photoluminescence properties of Eu3+ in lithium titanate10.1016/j.physb.2011.02.070 ↗
44. Spectroscopy study of SrAl2O4: Eu3+10.1016/j.jlumin.2011.09.008 ↗
45. Carnall · 1978 · 132
46. The emission spectrum and the radiative lifetime of Eu3+ in luminescent lanthanide complexes10.1039/b107770h ↗
47. The size-effect on luminescence properties of BaTiO3: Eu3+ nanocrystallites prepared by the sol-gel method10.1016/j.jallcom.2004.03.012 ↗
48. Radiative transitions of Eu3+ in non-crystalline alkali-alkaline-titanate film10.1016/j.physb.2008.05.017 ↗