K-doped P2-Na0.67−xKxNi0.33−yMn0.67CuyO2 cathode material with enhanced cycle performance for sodium-ion batteries
Source abstract
Abstract
As one of the typical compositions for Ni/Mn-based layered oxides, P2-Na 0.67Ni 0.33Mn 0.67O 2 is widely studied due to its high capacity and wide voltage. However, its electrochemical performance requires further improvement for practical application as a cathode material of sodium-ion batteries. In this study, we successfully synthesized a series of K-doped P2-Na 0.67−xK xNi 0.33−yMn 0.67Cu yO 2 (x = 0, 0.01, 0.06, 0.10, 0 < y < 0.16) cathode materials using a convenient sol-gel method. During the initial discharge, the NKNMC 0.06 electrode delivers a high capacity of 120.3 mAh g −1 at 100 mA g −1 when charged and discharged from 1.5 to 4.2 V. And the electrode retains a specific capacity of 101.6 mAh g −1, with a good capacity retention rate of 84.5 % after 100 cycles. The enhanced cycle performance can be attributed to the appropriate amount of K + ions occupying the Na + sites and providing support between the transition metal layers, which stabilizes the crystal structure and improves cycle stability of the electrode. Moreover, larger-sized K + ions expand the Na + diffusion channel, facilitating Na + diffusion. Furthermore, the pouch cell of NKNMC 0.06 delivers a capacity of 0.28 Ah during the first discharge and maintains a capacity retention rate of 78.2 % after 100 cycles.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Li‐ and Mn‐rich cathode materials: challenges to commercialization10.1002/aenm.201601284 ↗
2. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
3. The emerging chemistry of sodium ion batteries for electrochemical energy storage10.1002/anie.201410376 ↗
4. Sodium-ion batteries: from academic research to practical commercialization10.1002/aenm.201701428 ↗
5. Routes to high energy cathodes of sodium-ion batteries10.1002/aenm.201501727 ↗
6. Multiscale factors in designing alkali-ion (Li, Na, and K) transition metal inorganic compounds for next-generation rechargeable batteries10.1039/D0EE01277G ↗
7. Comprehensive understanding of sodium‐ion capacitors: definition, mechanisms, configurations, materials, key technologies, and future developments10.1002/aenm.202003804 ↗
8. Commercial prospects of existing cathode materials for sodium ion storage10.1002/aenm.201700274 ↗
9. Sodium-ion battery materials and electrochemical properties reviewed10.1002/aenm.201800079 ↗
10. Recent progress in electrode materials for sodium-ion batteries10.1002/aenm.201600943 ↗
11. Exploration of advanced electrode materials for rechargeable sodium‐ion batteries10.1002/aenm.201800212 ↗
12. Mitigating the voltage fading and lattice cell variations of O3-NaNi0.2Fe0.35Mn0.45O2 for high performance Na-ion battery cathode by Zn doping10.1016/j.jallcom.2019.04.271 ↗
13. High-rate performance O3-NaNi0.4Mn0.4Cu0.1Ti0.1O2 as a cathode for sodium ion batteries10.1016/j.jallcom.2019.04.053 ↗
14. Synthesis and electrochemical properties of a new compound, Na0.8Li0.1Ni0.31Mn0.62O210.1016/j.jallcom.2019.04.020 ↗
15. Superior electrochemical performance of O3-type NaNi0.5−xMn0.3Ti0.2ZrxO2 cathode material for sodium-ion batteries from Ti and Zr substitution of the transition metals10.1016/j.jallcom.2019.152581 ↗
16. P2-type Na0.8(Li0.33Mn0.67−xTix)O2 doped by Ti as cathode materials for high performance sodium-ion batteries10.1016/j.jallcom.2019.152402 ↗
17. Review—manganese-based P2-type transition metal oxides as sodium-ion battery cathode materials10.1149/2.0201514jes ↗
18. Electrochemical investigation of the P2–NaxCoO2 phase diagram10.1038/nmat2920 ↗
19. Electrochemical intercalation of sodium in NaxCoO2 bronzes10.1016/0167-2738(81)90076-X ↗
20. High‐abundance and low‐cost metal‐based cathode materials for sodium‐ion batteries: problems, progress, and key technologies
21. Superlattice ordering of Mn, Ni, and Co in layered alkali transition metal oxides with P2, P3, and O3 structures10.1021/cm000359m ↗
22. Studies of the layered manganese bronzes, Na2/3[Mn1−xMx]O2 with M=Co, Ni, Li, and Li2/3[Mn1−xMx]O2 prepared by ion-exchange10.1016/S0167-2738(99)00147-2 ↗
23. Intercalation of water in P2, T2 and O2 structure Az[CoxNi1/3-xMn2/3]O 210.1021/cm000721x ↗
24. Comprehensive review of P2-Type Na2/3Ni1/3Mn2/3O2, a potential cathode for practical application of Na-ion batteries10.1021/acsami.9b03937 ↗
25. Layered oxide cathodes promoted by structure modulation technology for sodium‐ion batteries10.1002/adfm.202001334 ↗
26. Layered oxide cathodes for sodium-ion batteries: phase transition, air stability, and performance
27. Heteroatom doping: an effective way to boost sodium ion storage10.1002/aenm.202000927 ↗
28. Challenges in developing electrodes, electrolytes, and diagnostics tools to understand and advance sodium‐ion batteries10.1002/aenm.201702403 ↗
29. Suppressing the P2-O2 phase transition of Na0.67Mn0.67Ni0.33O2 by magnesium substitution for improved sodium-ion batteries10.1002/ange.201602202 ↗
30. Structure-performance relationship of Zn 2+ substitution in P2–Na0.66Ni0.33Mn0.67O2 with different Ni/Mn ratios for high-energy sodium-ion batteries10.1021/acsaem.9b00614 ↗
31. Stabilizing P2-Type Ni–Mn oxides as high-voltage cathodes by a doping-integrated coating strategy based on zinc for sodium-ion batteries10.1021/acsami.1c12062 ↗
32. P2-type Na0.66Ni0.33–xZnxMn0.67O2 as new high-voltage cathode materials for sodium-ion batteries10.1016/j.jpowsour.2014.12.083 ↗
33. Insights into the effects of zinc doping on structural phase transition of P2-type sodium nickel manganese oxide cathodes for high-energy sodium ion batteries10.1021/acsami.6b06701 ↗
34. High‐voltage oxygen‐redox‐based cathode for rechargeable sodium‐ion batteries10.1002/aenm.202001111 ↗
35. P2-type Na2/3Ni1/3Mn2/3−xTixO2 as a new positive electrode for higher energy Na-ion batteries10.1039/C3CC49856E ↗
36. Overcoming transport and electrochemical limitations in the high-voltage Na0.67Ni0.33Mn0.67−yTiyO2 (0 ≤ y ≤ 0.33) cathode materials by Ti-doping10.1016/j.jpowsour.2018.09.103 ↗
37. On controlling the P2-O2 phase transition by optimal Ti-substitution on Ni- site in P2-type Na0.67Ni0.33Mn0.67O2 (NNMO) cathode for Na-ion batteries10.1016/j.jpowsour.2020.227957 ↗
38. Electrochemical performance and structural stability of air-stable Na0.67Ni0.33Mn0.67−xTixO2 cathode materials for high-performance sodium-ion batteries10.1016/j.cej.2020.125725 ↗
39. Complementary effect of Ti and Ni incorporation in improving the electrochemical performance of a layered sodium manganese oxide cathode for sodium-ion batteries10.1021/acsaem.1c00527 ↗
40. Reversible OP4 phase in P2–Na2/3Ni1/3Mn2/3O2 sodium ion cathode10.1016/j.jpowsour.2021.230324 ↗
41. P2-type transition metal oxides for high performance Na-ion battery cathodes10.1039/C7TA04515H ↗
42. P2-type Na0.67Mn0.65Fe0.2Ni0.15O2 cathode material with high-capacity for sodium-ion battery10.1016/j.electacta.2013.10.211 ↗
43. P2-type Na0.67Ni0.33−xCuxMn0.67O2 as new high-voltage cathode materials for sodium-ion batteries10.1007/s11581-017-2122-x ↗
44. Improving structural and moisture stability of P2-layered cathode materials for sodium-ion batteries10.1021/acsaem.1c03656 ↗
45. Cu-doped layered P2-type Na0.67Ni0.33−xCuxMn0.67O2 cathode electrode material with enhanced electrochemical performance for sodium-ion batteries10.1016/j.cej.2020.126578 ↗
46. Copper-substituted Na0.67Ni0.3−xCuxMn0.7O2 cathode materials for sodium-ion batteries with suppressed P2–O2 phase transition10.1039/C7TA00880E ↗
47. Tuning local chemistry of P2 layered-oxide cathode for high energy and long cycles of sodium-ion battery10.1038/s41467-021-22523-3 ↗
48. Co2SiO4 nanostructures: New simple synthesis, characterization and investigation of optical property10.1016/j.materresbull.2016.12.043 ↗
49. Facile synthesis, characterization and magnetic property of CuFe 12 O 19 nanostructures via a sol–gel auto-combustion process10.1016/j.jmmm.2015.10.049 ↗
50. Enhancement of magnetic, electrochemical and photocatalytic properties of lead hexaferrites with coating graphene and CNT: Sol-gel auto-combustion synthesis by valine10.1016/j.seppur.2017.05.029 ↗