journal article·2023-12Open access

Advancing novel Al-Mn-Cr-Zr based family of alloys tailored for powder bed fusion-laser beam process

Bharat Mehta, Karin Frisk, Lars Nyborg

Abstract

Additive manufacturing coupled with modern computational tools have enabled novel alloy design possibilities to create materials for the future. One such example is the Al-Mn-Cr-Zr based family of alloys tailored for powder bed fusion-laser beam process. This alloy system has previously been shown to produce crack free samples with good precipitation hardening response and strong thermal stability up to 523 K 2500 h. The current study investigates modifications made to enhance the mechanical response of the alloys. It was done by creating three novel alloy variants with higher Zr and addition of Mg. Interestingly, increasing Zr independently triggered grain refinement while addition of Mg independently causes significant increase in as-printed hardness albeit causing solidification cracking. Desirable properties were achieved when both higher Zr and addition of Mg was done at the same time. As-printed hardness enhanced by 30 % from previously known as-printed hardness of 102 HV to 132 HV in one of the variants. Upon direct ageing, peak hardness of 172 HV is observed thus suggesting retention of precipitation hardening.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. ASM International · 1998 · 417
2. Sustainability through alloy design: challenges and opportunities
3. Laser additive manufacturing of metallic components: materials, processes and mechanisms10.1179/1743280411Y.0000000014 ↗
4. A. 52900:2015 · 2015 · i · 1
5. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
6. Process and mechanical properties: applicability of a scandium modified Al-alloy for laser additive manufacturing10.1016/j.phpro.2011.03.047 ↗
7. Selective laser melting of a high strength Al[sbnd]Mn[sbnd]Sc alloy: Alloy design and strengthening mechanisms10.1016/j.actamat.2019.04.014 ↗
8. 3D printing of high-strength aluminium alloys10.1038/nature23894 ↗
9. M.T. Perez-Prado, A. Martin, D.F. Shi, and S. Milenkovic, An Al-5Fe-6Cr alloy with outstanding high temperature mechanical behavior by laser powder bed fusion, 55(January), 2022. 〈https://doi.org/10.1016/j.addma.2022.102828〉.10.1016/j.addma.2022.102828 ↗
10. An integrated computational materials engineering-anchored closed-loop method for design of aluminum alloys for additive manufacturing
11. Computational design of a crack-free aluminum alloy for additive manufacturing
12. Review of high-strength aluminium alloys for additive manufacturing by laser powder bed fusion10.1016/j.matdes.2022.110779 ↗
13. Microstructure and properties of a high temperature Al–Ce–Mn alloy produced by additive manufacturing10.1016/j.actamat.2020.07.014 ↗
14. Multi-scale microstuctural investigation of a new Al-Mn-Ni-Cu-Zr aluminium alloy processed by laser powder bed fusion
15. Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting10.1016/j.actamat.2018.04.053 ↗
16. Al–Mn–Cr–Zr-based alloys tailored for powder bed fusion-laser beam process: Alloy design, printability, resulting microstructure and alloy properties
17. The influence of processing parameters on the Al-Mn enriched nano-precipitates formation in a novel Al-Mn-Cr-Zr alloy tailored for power bed fusion-laser beam process10.3390/met12081387 ↗
18. Effect of precipitation kinetics on microstructure and properties of novel Al-Mn-Cr-Zr based alloys developed for powder bed fusion – laser beam process10.1016/j.jallcom.2022.165870 ↗
19. New aluminium alloy tailored for powder bed fusion – laser beam process
20. Thermal stability In Al-Mn-Cr-Zr based aluminium alloys tailored for powder bed fusion – laser beam
21. A criterion for cracking during solidification10.1016/j.actamat.2015.01.034 ↗
22. B. MEHTA, High Performance Aluminium Alloys for Laser Powder Bed Fusion: Alloy Design and Development, p. 48, 2021, [Online]. Available: 〈https://www.chalmers.se/sv/institutioner/ims/kalendarium/Sidor/High-Performance-Aluminium-Alloys-for-Laser-Powder.aspx %0Ahttps://research.chalmers.se/publication/527075/file/527075_Fulltext.pdf〉.
23. Effect of laser rescanning on the grain microstructure of a selective laser melted Al-Mg-Zr alloy10.1016/j.matchar.2018.03.033 ↗
24. First-principles studies on lattice constants and local lattice distortions in solid solution aluminum alloys10.1016/j.commatsci.2012.08.037 ↗
25. Additive manufacturing and mechanical properties of the dense and crack free Zr-modified aluminum alloy 6061 fabricated by the laser-powder bed fusion
26. T. Böllinghaus, H. Herold, C. Cross, and J. Lippold, Hot Cracking Phenomena in Welds II. 2008. Accessed: Jul. 28, 2022. [Online]. Available: 〈https://link.springer.com/book/10.1007/978-3-540-78628-3〉.10.1007/978-3-540-78628-3 ↗
27. Influence of SLM scan-speed on microstructure, precipitation of Al3Sc particles and mechanical properties in Sc- and Zr-modified Al-Mg alloys10.1016/j.matdes.2017.11.053 ↗
28. Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals10.1080/09506608.2016.1191808 ↗
29. SLM-processed Sc- and Zr- modified Al-Mg alloy: mechanical properties and microstructural effects of heat treatment10.1016/j.msea.2017.06.089 ↗
30. A new high strength Al–Mg–Sc alloy for laser powder bed fusion with calcium addition to effectively prevent magnesium evaporation10.1016/j.jmatprotec.2021.117416 ↗
31. Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting10.1016/j.matdes.2016.11.040 ↗
32. Design approaches for printability-performance synergy in Al alloys for laser-powder bed additive manufacturing10.1016/j.matdes.2021.109640 ↗
33. Processing parameters in laser powder bed fusion metal additive manufacturing10.1016/j.matdes.2020.108762 ↗
34. Grain refinement in additively manufactured ferritic stainless steel by in situ inoculation using pre-alloyed powder10.1016/j.scriptamat.2020.113690 ↗
35. The crack healing effect of scandium in aluminum alloys during laser additive manufacturing10.1016/j.jmapro.2019.12.050 ↗
36. Easterling · 1992
37. M. Roscher, Development of high-strength Aluminum alloys for Laser Powder Bed Fusion, 2022.10.1016/j.addma.2022.102657 ↗
38. Towards high-temperature applications of aluminium alloys enabled by additive manufacturing
39. Major · 2016
40. AlSi10Mg material datasheet: SLM Solutions. https://www.slm-solutions.com/fileadmin/Content/Powder/MDS/MDS_Al-Alloy_AlSi10Mg_0520_EN.pdf (Accessed 05 August 2022).
41. Laser powder bed fusion of an al-mg-sc-zr alloy: manufacturing, peak hardening response and thermal stability at peak hardness10.3390/met12010057 ↗
42. Precipitation kinetics, microstructure evolution and mechanical behavior of a developed Al–Mn–Sc alloy fabricated by selective laser melting10.1016/j.actamat.2020.04.015 ↗
43. Process optimization and mechanical property evolution of AlSiMg0.75 by selective laser melting10.1016/j.matdes.2017.11.045 ↗