journal article·2023-11

Rapid solidification of Al-Si alloys using differential fast scanning calorimetry

Qin Peng, Yunhu Zhang, Sigurd Wenner, Bin Yang, Benjamin Milkereit, Jette Broer, Armin Springer, Christoph Schick, Olaf Keßler

Publisher page

Abstract

Tailoring microstructures and properties in metal alloys, e.g., in additive manufacturing, requires a deep understanding of its rapid solidification behavior. However, in many rapid solidification processes, in-situ investigations are difficult due to the lack of accurate measurements of cooling rates and nucleation undercooling. This study used differential fast scanning calorimetry (DFSC) to investigate the rapid solidification of micro-sized Al-Si alloy particles, with compositions including Al-Si1, Al-Si10, Al-Si12, and Al-Si20 (mass%), by employing controllable cooling rates ranging from 100 K/s to 95,000 K/s. Based on the analysis of nucleation undercooling and microstructure, the solidification sequence and different mechanisms of the α -Al phase formation were proposed. A modified model using classical nucleation theory (CNT), including surface heterogeneous nucleation, and interface/bulk heterogeneous nucleation for α-Al is employed. This study presents a practical approach to examining the rapid solidification behavior of metal particles, allowing the distinction between surface and interface/bulk nucleation.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Additive Manufacturing Materials and Processes · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Melt pool temperature and cooling rates in laser powder bed fusion
2. Effect of real-time cooling rate on microstructure in laser additive manufacturing10.1016/j.jmatprotec.2016.01.017 ↗
3. A selective laser melting and solution heat treatment refined Al–12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility10.1016/j.actamat.2015.05.017 ↗
4. Determination of true temperature in selective laser melting of metal powder using infrared camera10.4028/www.scientific.net/MSF.834.93 ↗
5. Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder10.1016/j.matdes.2014.07.006 ↗
6. Rapid manufacturing of aluminum components10.1126/science.1086989 ↗
7. Selective laser melting of aluminum die-cast alloy-Correlations between process parameters, solidification conditions, and resulting mechanical properties10.2351/1.4906389 ↗
8. Analysis of melting and resolidification in a two-component metal powder bed subjected to temporal Gaussian heat flux10.1016/j.ijheatmasstransfer.2005.04.010 ↗
9. Melting and resolidification of a subcooled metal powder particle subjected to nanosecond laser heating10.1016/j.ijheatmasstransfer.2006.10.041 ↗
10. Heat transfer modelling and stability analysis of selective laser melting10.1016/j.apsusc.2007.08.074 ↗
11. Laser additive manufacturing of metallic components10.1179/1743280411Y.0000000014 ↗
12. The development of nucleation controlled microstructures during laser treatment of Al-Si alloys10.1016/1359-6454(95)00393-2 ↗
13. Dynamical evolution of microstructure in finely atomized droplets of Al-Si alloys10.1016/S1359-6454(02)00226-4 ↗
14. Undercooling and glass formation in Al-based alloys10.1016/S0921-5093(00)01483-0 ↗
15. Undercooling and solidification of atomized liquid droplets10.1016/S0921-5093(01)01430-7 ↗
16. Rapid solidification of highly undercooled aluminum powders
17. Nucleation behaviour and microstructure of single Al-Si12 powder particles rapidly solidified in a fast scanning calorimeter10.1007/s10853-021-06096-6 ↗
18. Nucleation behavior of a single Al-20Si particle rapidly solidified in a fast scanning calorimeter10.3390/ma14112920 ↗
19. Assessment of AlZnMgCu alloy powder modification for crack-free laser powder bed fusion by differential fast scanning calorimetry10.1016/j.matdes.2021.109677 ↗
20. Correlation between differential fast scanning calorimetry and additive manufacturing results of aluminium alloys10.3390/ma15207195 ↗
21. Fast scanning calorimetry study of Al alloy powder for understanding microstructural development in laser powder bed fusion10.1016/j.matdes.2022.110830 ↗
22. Size and rate dependence of crystal nucleation in single tin drops by fast scanning calorimetry10.1063/1.4789447 ↗
23. Dependence of crystal nucleation on prior liquid overheating by differential fast scanning calorimeter10.1063/1.4868002 ↗
24. The kinetics of the glass transition of silicate glass measured by fast scanning calorimetry10.1016/j.tca.2019.01.001 ↗
25. The temperature calibration of scanning calorimeters10.1016/0040-6031(90)80235-Q ↗
26. Metallographic preparation of single powder particles10.1515/pm-2021-0009 ↗
27. Dendrite growth in eutectic alloys: the coupled zone10.1179/095066079790136408 ↗
28. The coupled zone of rapidly solidified Al-Si alloys in laser treatment10.1016/0956-7151(92)90106-O ↗
29. The Al-Si (Aluminum-Silicon) system10.1007/BF02868729 ↗
30. Bulk liquid undercooling and nucleation in gold10.1016/j.actamat.2006.06.007 ↗
31. Experimental and numerical modeling of equiaxed solidification in metallic alloys10.1016/j.actamat.2008.02.041 ↗
32. Liebermann · 1993
33. Structural and mechanical properties of Al–Si alloys obtained by fast cooling of a levitated melt10.1016/j.msea.2004.07.037 ↗
34. Precision density measurement of silicon10.6028/jres.068A.050 ↗
35. Korb · 1992
36. Line-tension effects on heterogeneous nucleation on a spherical substrate and in a spherical cavity10.1021/la504926s ↗
37. On the approximation of the free energy change on crystallization10.1016/0001-6160(79)90076-2 ↗
38. The measurement of solid-liquid surface energies in the Al-Cu, Al-Si and Pb-Sn systems10.1016/0001-6160(85)90161-0 ↗
39. Characterization of hypereutectic Al-Si powders solidified under far-from equilibrium conditions10.1007/s11661-007-9168-8 ↗
40. Repeated nucleation in an undercooled aluminum droplet10.1016/S0022-0248(96)01121-9 ↗
41. Heterogeneous nucleation and adsorption10.1098/rsta.2002.1137 ↗
42. Kinetic processes in undercooled melts10.1016/S0921-5093(96)10647-X ↗
43. Formation of crystal nuclei in liquid metals10.1063/1.1699435 ↗
44. Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by selective laser melting10.1016/j.actamat.2019.06.013 ↗
45. Microstructure and mechanical properties of Al–12Si produced by selective laser melting10.1016/j.msea.2013.10.023 ↗
46. Influence of Annealing on Mechanical properties of Al-20Si processed by selective laser melting10.3390/met4010028 ↗
47. Prediction of the maximal recalescence temperature upon rapid solidification of bulk undercooled Cu70Ni30 alloy10.1016/j.jallcom.2008.02.074 ↗