Continuous conducting architecture developed by supporting Prussian blue analogue on metal-organic framework derived carbon-doped manganese- oxide nanorods for high-performance sodium-ion batteries
Source abstract
Abstract
Prussian blue analogues (PBA) are regarded as promising cathode materials for sodium-ion batteries (SIBs) owing to their open framework with large interstitial sites to accommodate Na+ ions. However, PBA suffer from low electronic conductivity and mechanical instability, which may be improved by their structural modification leading to enhanced kinetics. In this regard, we report an in-situ integration of ultra-small PBA cubes into threedimensional metal organic framework (MOF) derived carbon-doped manganese oxide nanorods (C-Mn2O3), which form a continuous conductive architecture with intimate PBA/C-Mn2O3 contact. The C-Mn2O3 nanorods provide nucleation sites for the growth of PBA cubes and further act as the electronic pathway to improve electrode reaction kinetics. This hierarchical configuration effectively buffers the lattice expansion, which improve the structural stability of NiCoPBA. Consequently, the composite exhibits promising performance in aqueous Na+ batteries. Specifically, it delivers a high capacity of 97 mAh/g within a narrow potential window of and retained 82% capacity for 1000 cycles in aqueous electrolyte. It shows even higher capacity of 136 mAh/g and similar capacity retention (76% after 1000 cycles) in non-aqueous electrolytes. The promising performance of developed materials demonstrates the significant impact decreasing the size of PBA cubes has on the capacity by reducing the diffusion pathways and thus facilitating intercalation/deintercalation within the cubes. This study offers new insights of exploiting redox-active substrates to modify and stabilize PBA materials for energy storage applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Optimization of electrochemical pre‐sodiation parameters of na‐ion full cells for stable sei formation: hard carbon rods from waste firefighter suits10.1002/ente.202300014 ↗
2. Cage-like porous prussian blue as high-capacity cathode for sodium-ion batteries
3. Single-crystal FeFe(CN)6 nanoparticles: a high capacity and high rate cathode for na-ion batteries10.1039/c3ta12036h ↗
4. Low-defect prussian blue nanocubes as high capacity and long life cathodes for aqueous Na-ion batteries10.1016/j.nanoen.2015.02.006 ↗
5. High-performance fe-based prussian blue cathode material for enhancing the activity of low-spin Fe by Cu doping
6. Reversible structural evolution of sodium-rich rhombohedral prussian blue for sodium-ion batteries
7. Mesoporous prussian blue analogues: Template‐free synthesis and sodium‐ion battery applications10.1002/anie.201310679 ↗
8. A novel border-rich prussian blue synthetized by inhibitor control as cathode for sodium ion batteries10.1016/j.nanoen.2017.07.005 ↗
9. Organic solvothermal method promoted monoclinic prussian blue as a superior cathode for na-ion batteries
10. Cage-like porous prussian blue as high-capacity cathode for sodium-ion batteries10.1021/acsanm.1c04416 ↗
11. Prussian blue and its analogues as cathode materials for Na, K, Mg, Ca, Zn and Al-ion batteries10.1016/j.nanoen.2022.107424 ↗
12. Monoclinic bimetallic prussian blue analog cathode with high capacity and long life for advanced sodium storage
13. Advanced characterization techniques paving the way for commercialization of low‐cost prussian blue analog cathodes10.1002/adfm.202108616 ↗
14. Enhanced storage of sodium ions in prussian blue cathode material through nickel doping10.1039/C7TA00132K ↗
15. Elevating the discharge plateau of prussian blue analogs through low-spin Fe redox induced intercalation pseudocapacitance. Energy
16. The cathode choice for commercialization of sodium‐ion batteries: Layered transition metal oxides versus prussian blue analogs10.1002/adfm.201909530 ↗
17. Graphene-roll-wrapped prussian blue nanospheres as a high-performance binder-free cathode for sodium-ion batteries10.1021/acsami.7b06334 ↗
18. Improved rate performance of prussian blue cathode materials for sodium ion batteries induced by ion-conductive solid-electrolyte interphase layer10.1016/j.jpowsour.2018.07.071 ↗
19. Effect of eliminating water in prussian blue cathode for sodium‐ion batteries
20. Aqueous dual-electrolyte full-cell system for improving energy density of sodium-ion batteries10.1021/acsami.2c06304 ↗
21. Rhombohedral prussian white as cathode for rechargeable sodium-ion batteries10.1021/ja510347s ↗
22. Synthesis of monocrystalline nanoframes of prussian blue analogues by controlled preferential etching10.1002/anie.201600661 ↗
23. Activation of sodium storage sites in prussian blue analogues via surface etching10.1021/acs.nanolett.7b01366 ↗
24. Preparation of various prussian blue analogue hollow nanocubes with single crystalline shells10.1002/ejic.201200654 ↗
25. Prussian blue analogues for sodium‐ion batteries: Past, present, and future10.1002/adma.202108384 ↗
26. Subzero‐temperature cathode for a sodium‐ion battery10.1002/adma.201600846 ↗
27. Stepwise hollow prussian blue nanoframes/carbon nanotubes composite film as ultrahigh rate sodium ion cathode10.1002/adfm.202002624 ↗
28. Design of a prussian blue analogue/carbon nanotube thin‐film nanocomposite: Tailored precursor preparation, synthesis, characterization, and application10.1002/chem.201504444 ↗
29. Prussian blue without coordinated water as a superior cathode for sodium-ion batteries10.1039/C5CC01180A ↗
30. Crystallographic-plane tuned prussian-blue wrapped with rgo: A high-capacity, long-life cathode for sodium-ion batteries10.1039/C6TA10592K ↗
31. Highly crystalline prussian blue/graphene composites for high-rate performance cathodes in Na-ion batteries10.1039/C5RA04769B ↗
32. Prussian blue@C composite as an ultrahigh‐rate and long‐life sodium‐ion battery cathode10.1002/adfm.201600747 ↗
33. Capacitance controlled, hierarchical porous 3d ultra-thin carbon networks reinforced prussian blue for high performance na-ion battery cathode10.1016/j.nanoen.2019.01.048 ↗
34. Continuous conductive networks built by prussian blue cubes and mesoporous carbon lead to enhanced sodium-ion storage performances10.1021/acsami.1c06634 ↗
35. Zif-12-derived n-doped fe/co/s/@ c nanoparticles as high-performance composite anode electrode materials for lithium-ion batteries10.1016/j.jallcom.2022.167037 ↗
36. Magnetic cu/co nanoparticles supported on nitrogen‐doped porous carbon derived from Cu/Co@ aZIF: Investigation of catalytic activity and structural properties10.1002/aoc.7017 ↗
37. High‐performance electrodes for li‐ion cell: Heteroatom‐doped porous carbon/cos structure and investigation of their structural and electrochemical properties10.1002/er.8452 ↗
38. Elucidating the optimized P2 type Na0.67Mn1-xCuxO2 cathode active material via operando xas10.1016/j.jallcom.2022.168138 ↗
39. Structural and magnetic properties of Fe-doped Mn2O3 orthorhombic bixbyite10.1007/s10948-017-4464-z ↗
40. Tailoring facets of α-Mn2O3 microcrystalline catalysts for enhanced selective oxidation of glycerol to glycolic acid10.1021/acscatal.1c01566 ↗
41. Construction of hierarchical Mn2O3 hollow microspheres derived from metal–organic frameworks for high performance supercapacitors10.1016/j.jpowsour.2021.230077 ↗
42. Poly (azure c)-coated cofe prussian blue analogue nanocubes for high-energy asymmetric supercapacitors10.1016/j.jcis.2022.08.106 ↗
43. Rational design of multiple prussian-blue analogues/nf composites for high-performance surpercapacitors10.1039/D0NJ00235F ↗
44. Understanding hydrothermal transformation from mn2o3 particles to Na0.55Mn2O4·1.5 H2O nanosheets, nanobelts and single crystalline ultra-long Na4Mn9O18 nanowires10.1038/srep18275 ↗
45. Prussian blue analogues Mn[Fe(Cn)6]0.6667·nH2O cubes as an anode material for lithium-ion batteries10.1039/C5DT03030G ↗
46. ul Haq T, Khan AA, Inayat A, Shoaib M, Haider A, Saleem M, Abbas SM, Pope MA, Hussain I: Sodium decavanadate encapsulated mn-btc POM@MOF as high-capacity cathode material for aqueous sodium-ion batteries
47. A dual‐insertion type sodium‐ion full cell based on high‐quality ternary‐metal prussian blue analogs10.1002/aenm.201702856 ↗