Preparation and oxidation behavior of NiCrAlY coatings with Re-base diffusion barrier on a nickel-based single-crystal superalloy
Source abstract
Abstract
Four Pt-modified NiCrAlY coatings with different thicknesses and Re contents diffusion barrier (DB) were prepared on a single crystal superalloy by sequential treatments of Ni-Re co-electrodeposition, arc ion plating and Pt electrodeposition. To explore the effect of different forms of the Re-base DB on the oxidation resistance and interdiffusion behavior in Pt-modified NiCrAlY coating, the isothermal oxidation behavior of the four coatings at 1050 °C was investigated. The results indicated that Re-base DB can effectively improve the high-temperature oxidation resistance of Pt-modified NiCrAlY coating by inhibiting the internal diffusion of Al as well as the external diffusion of refractory elements. The coating samples of 5 µm Ni-45Re (at%) DB exhibited the lowest interdiffusion extent and the best long-term stability. Higher Re content DB tended to form layered σ-(Cr,Re) phase, while DB with lower content could only form granular σ-(Cr,Re) phase. The influence of different micromorphologies of the σ-phase on the long-term stability of DB was discussed.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Progress in coatings for gas turbine airfoils10.1016/S0257-8972(98)00667-7 ↗
2. Advances in the oxidation resistance of high-temperature turbine materials10.1002/sia.1085 ↗
3. The hotter the engine, the better10.1126/science.1179327 ↗
4. Progress in thermal barrier coatings for advanced aeroengines
5. Thermal barrier coatings technology: critical review, progress update, remaining challenges and prospects10.1179/1743280413Y.0000000019 ↗
6. Designing oxidation-resistant coatings10.1007/s11837-000-0112-2 ↗
7. Y-rich oxide distribution in plasma sprayed MCrAlY-coatings studied by SEM with a cathodoluminescence detector and Raman spectroscopy10.1016/j.surfcoat.2009.08.034 ↗
8. High temperature corrosion behavior of an AlP NiCoCrAIY coming modified by aluminizing10.1016/j.surfcoat.2011.05.005 ↗
9. Preparation and oxidation performance of a NiCoCrAlYSiHf + NiAl composite coating deposited by arc ion plating and magnetron sputtering techniques10.1007/s11665-018-3845-1 ↗
10. On the mechanism of secondary reaction zone formation in a coated nickel-based single-crystal superalloy containing ruthenium10.1016/j.scriptamat.2013.03.015 ↗
11. Mechanical degradation of coating systems in high-temperature cyclic oxidation10.1016/0257-8972(95)02551-0 ↗
12. Formation of secondary reaction zones in diffusion aluminide coated Ni-base single-crystal superalloys containing ruthenium10.1007/s11661-008-9534-1 ↗
13. Effect of aluminizing coating on creep properties of Ni-base single crystal superalloys
14. W. Beele. Diffusion barrier design against rapid interdiffusion of MCrA1Y and Ni-base material10.1016/0257-8972(93)90194-S ↗
15. Chemical vapor deposition of smooth α-Al2O3 films on nickel base superalloys as diffusion barriers10.1016/S0257-8972(99)00333-3 ↗
16. High temperature characteristics of Ir-Ta coated and aluminized Ni-base single crystal superalloys10.1016/j.stam.2004.03.004 ↗
17. A feasibility study of a diffusion barrier between Ni-Cr-Al coatings and nickel-based eutectic alloys10.1016/0040-6090(78)90043-3 ↗
18. Effect of creep deformation on oxidation behavior of nickel-based alloy with Re-based diffusion barrier coating10.1002/maco.200804129 ↗
19. Composite coatings with and without an in situ forming Cr-based interlayer: Preparation and oxidation behavior10.1016/j.corsci.2011.05.026 ↗
20. The role of Re in effecting isothermal oxidation behavior of β-(Ni,Pt)Al coating on a Ni-based single crystal superalloy10.1016/j.corsci.2020.108892 ↗
21. Synergistic effect of Re-base diffusion barrier and Pt modification on the oxidation behaviour of NiCrAlY coatings10.1016/j.corsci.2021.109919 ↗
22. Preparation and oxidation performance of a low-diffusion Pt-modified aluminide coating with Re-base diffusion barrier10.1016/j.corsci.2020.108582 ↗
23. Electrodeposition and properties of NiW, FeW and FeNiW amorphous alloys. A comparative study10.1016/S0013-4686(00)00437-0 ↗
24. Electrodeposition of rhenium-nickel alloys from aqueous solutions10.1016/j.electacta.2009.03.003 ↗
25. Study on the electroplating process of Ni-Re alloys with re content in wide range
26. Prenaration and cyclic oxidation behaviour of Re doped aluminide coatings on a Ni-based single crystal superalloy10.1016/j.corsci.2019.108354 ↗
27. Effect of Mo, Ta, and Re on high-temperature oxidation behavior of minor Hf doped β-NiAl alloy10.1016/j.corsci.2015.10.011 ↗
28. Influence of aluminum and rhenium on the isothermal oxidation behavior of CoNiCrAlY alloys10.1007/s11085-010-9221-7 ↗
29. Diffusion and high temperature oxidation of metals, American Society for Metals
30. Calculations of parabolic rate constants for metal oxidation10.1007/BF00603388 ↗
31. Development of a new TBC system for more efficient gas turbine engine application
32. The effect of TCP morphology on the development of aluminide coated superalloys10.1016/j.msea.2005.01.005 ↗
33. Interdiffusion behavior between NiAlHf coating and Ni-based single crystal superalloy with different crystal orientations10.1016/j.apsusc.2014.11.101 ↗
34. A thermodynamic description of the Ni-Al-Cr-Re system10.1016/S0921-5093(98)00875-2 ↗
35. Microstructural analysis of the role of rhenium in advanced MCrAIY coatings10.1016/0257-8972(95)02546-4 ↗
36. Improvement of the oxidation resistance of NiCrAlY coatings by the addition of rhenium10.1016/j.surfcoat.2006.02.009 ↗
37. The effect of yttrium addition on oxidation of a sputtered nanocrystalline coating with moderate amount of tantalum in composition10.1016/j.apsusc.2016.01.088 ↗