Texture weakening effect from {101̅1} twins induced static recrystallization in ambient extrusion AZ31 magnesium alloy
Source abstract
Abstract
In magnesium alloys, { 10 1 ̅ 1 } twins have great effect on their recrystallization behavior due to the high strain concentration in twinning zones. In this study, isothermal annealing was conducted on ambient extrusion AZ31 magnesium bars to investigate { 10 1 ̅ 1 } twins related static recrystallization and texture weakening effect. The results show that, during annealing, static recrystallization occurs firstly in { 10 1 ̅ 1 } twinning zones. After 300 ℃ annealing, equiaxed grains are obtained in these extrusion bars. With the increasing extrusion strain, the grain size decreases gradually and the basal texture becomes weaker. Tensile and compressive yield strength show a significant decrease after annealing, meanwhile, they follow a Hall-Petch relationship. However, a negative Hall-Petch coefficient K is found in tensile tests where the tensile yield strength decreases gradually with the reduced grain size. Different contribution from grain refinement and texture weakening on yield strength are discussed and separated. The texture weakening effect from { 10 1 ̅ 1 } twins induced static recrystallization is responsible for the negative Hall-Petch coefficient K during tensile tests.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Kainer · 2003
2. Friedrich · 2006
3. Latest research advances on magnesium and magnesium alloys worldwide10.1016/j.jma.2020.02.003 ↗
4. Additive manufacturing of metallic lattice structures: Unconstrained design, accurate fabrication, fascinated performances, and challenges10.1016/j.mser.2021.100648 ↗
5. Plane-strain compression of magnesium and magnesium alloy crystals
6. Unveiling the influence of dendrite characteristics on the slip/twinning activity and the strain hardening capacity of Mg-Sn-Li-Zn cast alloys10.1016/j.jma.2022.03.016 ↗
7. Rejuvenation of plasticity via deformation graining in magnesium10.1038/s41467-022-28688-9 ↗
8. Twinning and the ductility of magnesium alloys: Part I. “Tensile” twins10.1016/j.msea.2006.12.037 ↗
9. Twinning and the ductility of magnesium alloys: Part II. “Contraction” twins10.1016/j.msea.2007.02.109 ↗
10. {101̅2} twinning nucleation in magnesium assisted by alternative sweeping of partial dislocations via an intermediate precursor10.1016/j.jma.2020.06.012 ↗
11. Improved strength and plasticity of magnesium matrix nanocomposites reinforced by carbonaceous nanoplatelets and micro-clusters10.1016/j.jmrt.2022.10.083 ↗
12. Slip, twining and fracture in hexagonal close-packed metals, Metall
13. Deformation twinning10.1016/0079-6425(94)00007-7 ↗
14. Contribution of extension twinning to plastic strain at low stress stage deformation of a Mg-3Al-1Zn alloy10.1016/j.msea.2017.10.038 ↗
15. Role of {101̅2} twinning characteristics in the deformation behavior of a polycrystalline magnesium alloy10.1016/j.actamat.2010.07.002 ↗
16. Nucleation and propagation of {101̅2} twins in AZ31 magnesium alloy10.1016/j.actamat.2015.08.024 ↗
17. Effects of pretwins on texture and microstructural evolutions of AZ31 magnesium alloy during high temperature deformation10.1016/j.jallcom.2021.162412 ↗
18. Importance of propagation in controlling the twinning stress in Mg10.1016/j.scriptamat.2018.11.047 ↗
19. Characteristics of the contraction twins formed close to the fracture surface in Mg-3Al-1Zn alloy deformed in tension10.1016/j.scriptamat.2008.06.041 ↗
20. The crystallographic characteristics of fracture in magnesium single crystal10.1016/0001-6160(57)90075-5 ↗
21. The role of deformation twinning in the fracture behavior and mechanism of basal textured magnesium alloys10.1016/j.msea.2014.02.010 ↗
22. Twinning-induced softening in polycrystalline AM30 Mg alloy at moderate temperatures10.1016/j.scriptamat.2005.11.029 ↗
23. Twinning and its related work hardening during the ambient extrusion of a magnesium alloy10.1016/j.msea.2013.03.078 ↗
24. A critical test of twin-induced softening in a magnesium alloy extruded to a strain of 0.7 at room temperature10.1016/j.scriptamat.2012.09.021 ↗
25. Ambient extrusion induced working hardening and their effect on mechanical properties in AZ31 hot-extrusion bar10.1016/j.msea.2021.142437 ↗
26. Improving the plastic homogeneity of a magnesium alloy by introducing high volume fraction of twins during ambient extrusion10.1016/j.jmatprotec.2019.116445 ↗
27. Texture evolution during static recrystallization of cold-rolled magnesium alloys10.1016/j.actamat.2015.12.045 ↗
28. Individual effect of recrystallisation nucleation sites on texture weakening in a magnesium alloy: Part 1-Double twins10.1016/j.actamat.2017.06.015 ↗
29. On the recrystallization behavior of homogenized AZ81 magnesium alloy: The effect of mechanical twins and γ precipitates10.1016/j.msea.2012.07.054 ↗
30. Strain dependency of dynamic recrystallization during thermomechanical processing of Mg-GdY-Zn-Zr10.1016/j.jmrt.2022.02.120 ↗
31. Tension-compression asymmetry and Bauschinger-like effect of AZ31 magnesium alloy bars processed by ambient extrusion10.1016/j.msea.2022.144353 ↗
32. Twin recrystallization mechanisms and exceptional contribution to texture evolution during annealing in a magnesium alloy10.1016/j.actamat.2016.12.058 ↗
33. Tension-compression asymmetry and Bauschinger-like effect of AZ31 magnesium alloy bars processed by ambient extrusion10.1016/j.msea.2022.144353 ↗
34. A semianalytical sachs model for the flow stress of a magnesium alloy10.1007/BF02586147 ↗
35. Influence of texture on Hall-Petch relationships in an Mg alloy10.1016/j.actamat.2014.08.023 ↗
36. Toward the development of Mg alloys with simultaneously improved strength and ductility by refining grain size via the deformation process
37. Ductility enhancement in AZ31 magnesium alloy by controlling its grain structure10.1016/S1359-6462(01)00996-4 ↗
38. The effect of continuous confined strip shearing deformation on the mechanical properties of AZ31 magnesium alloys10.1016/j.msea.2018.11.069 ↗
39. The mechanism for the high dependence of the Hall-Petch slope for twinning/slip on texture in Mg alloys10.1016/j.actamat.2017.02.044 ↗
40. Grain size and texture effect on compression behavior of hot-extruded Mg-3Al-1Zn alloys at room temperature10.1016/j.matchar.2009.04.001 ↗
41. Quantitative prediction of texture effect on Halle-Petch slope for magnesium alloys10.1016/j.actamat.2019.05.016 ↗