Enhanced mechanical properties of Zr-Cu-Al-Ni bulk amorphous alloys by Ag and O doping
Source abstract
Abstract
The microstructure and properties of amorphous alloys are very sensitive to oxygen content, so the extremely stringent atmospheric condition is required for their production, which also significantly increases the production costs. In this work, the strength and plasticity of Zr 52Cu 23Ni 10.5Al 14.5 amorphous alloy rods with a diameter of 2 mm are severely deteriorated after the addition of 0.15 at% O due to the formation of micrometer scale crystalline phases in glassy matrix. In contrast, the combined addition of 1 at% Ag and 0.15 at% O can substantially improve its fracture strength and plasticity. This synergy effect is mainly attributed to the fact that minor Ag addition can enhance the uniform distribution of nanocrystalline phases and refine their sizes. The present results can provide ideas for the industrial production and large-scale commercial applications of amorphous alloys in the future.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Super-high strength of over 4000 MPa for Fe-based bulk glassy alloys in [(Fe1−xCOx)0.75B0.2Si0.05]96Nb4 system10.1016/j.actamat.2004.05.022 ↗
2. Mechanical performance and fracture behavior of Fe41Co7Cr15Mo14Y2C15B6 bulk metallic glass10.1557/jmr.2007.0038 ↗
3. Selective laser melting of an Mg/Metallic Glass hybrid for significantly improving chemical and mechanical performances10.1016/j.apsusc.2021.152229 ↗
4. A study on corrosion and corrosion-wear behavior of Fe-based amorphous alloy coating prepared by high velocity oxygen fuel method10.1016/j.jmrt.2021.10.103 ↗
5. Multicomponent Fe-based bulk metallic glasses with excellent corrosion and wear resistances10.3390/met12040564 ↗
6. Composition design and properties characterization for FeSiBCuC metallic glasses with large plasticity10.1016/j.jallcom.2021.163180 ↗
7. Insight into efficient degradation of 3,5-dichlorosalicylic acid by Fe-Si-B amorphous ribbon under neutral condition10.1016/j.apcatb.2021.120258 ↗
8. Relating melting temperature with structure heterogeneity and plasticity of Zr57Cu20Al10Ni8Ag5 bulk metallic glass10.1016/j.jnoncrysol.2020.120100 ↗
9. Enhancing dynamic mechanical properties of bulk metallic glass composites via deformation-induced martensitic transformation10.1016/j.scriptamat.2020.05.012 ↗
10. Double toughening Ti-based bulk metallic glass composite with high toughness, strength and tensile ductility via phase engineering
11. Influences of oxygen on plastic deformation of a Fe-based bulk metallic glass10.1016/j.scriptamat.2017.03.018 ↗
12. Influence of oxygen on the glass formation of Mo-O binary alloys10.1016/j.jnoncrysol.2018.07.064 ↗
13. Inducing strain hardening in a Zr-based bulk metallic glass via cobalt mediated phase separations10.1016/j.jallcom.2017.11.223 ↗
14. Effect of loading pressure on mechanical properties and interface characteristics of 7056 Al alloy particle reinforced Zr-Al-Ni-Cu bulk metallic glass matrix composite prepared by spark plasma sintering10.1016/j.jallcom.2019.152605 ↗
15. Effect of different cooling rates in high rheological rate forming process on mechanical properties of Zr57Cu20Al10Ni8Ag5 bulk metallic glass10.1007/s12540-019-00387-z ↗
16. Effect of intermittent ultrasonic vibration-assisted compression on the mechanical properties of Zr-based amorphous alloys
17. Synthesis and characterization of particulate reinforced Zr57Nb5Al10Cu15.4Ni12.6 bulk metallic glass composites10.1016/S1359-6454(99)00103-2 ↗
18. Microstructure and mechanical properties of Zr55Cu30Al10Ni5 amorphous alloy with high-energy states produced by strip casting10.1016/j.jallcom.2020.158542 ↗
19. Enhanced plasticity in a Zr-based bulk metallic glass composite with in situ formed intermetallic phases
20. Effect of oxygen content on the microstructure, compression properties and work-hardening behaviors of ZrCuAlNi glassy composites10.1016/j.msea.2013.05.037 ↗
21. Role of niobium and oxygen concentration on glass forming ability and crystallization behavior of Zr-Ni-Al-Cu-Nb bulk metallic glasses with low copper concentration10.1016/j.jnoncrysol.2016.05.015 ↗
22. Understanding the effect of oxygen on the glass-forming ability of Zr55Cu55Al9Be9 bulk metallic glass by ab initio molecular dynamics simulations10.1007/s11661-021-06242-4 ↗
23. Glass forming ability, flexural strength, and wear properties of additively manufactured Zr-based bulk metallic glasses produced through laser powder bed fusion
24. Glass forming ability of the Zr50Cu40Al10 alloy with two oxygen levels10.1016/j.jnoncrysol.2018.05.034 ↗
25. Influence of powder characteristics on the structural and the mechanical properties of additively manufactured Zr-based bulk metallic glass10.1016/j.matdes.2021.109976 ↗
26. Isothermal crystallization kinetics of an industrial-grade Zr-based bulk metallic glass10.1016/j.jnoncrysol.2021.121145 ↗
27. The effect of oxygen on phase formation in an industrial Zr based bulk metallic glass10.1016/j.intermet.2020.107055 ↗
28. Beneficial effects of oxygen addition on glass formation in a high-entropy bulk metallic glass10.1016/j.intermet.2018.05.007 ↗
29. Effect of minor addition of oxygen on bulk metallic glass formation of binary Cu-Zr alloys via containerless processing10.1002/pssb.202000140 ↗
30. Nanoquasicrystallization of Zr-based metallic glasses10.1016/S0921-5093(00)01861-X ↗
31. Effect of strain rate and crystalline inclusions on mechanical properties of bulk glassy and partially crystallized Zr52.5Cu17.9Ni14.6Al10Ti5 alloy10.1016/S1003-6326(19)65012-0 ↗
32. Plasticity improvement of Zr-based bulk metallic glasses by adjusting oxygen content and cooling rate10.2320/matertrans.M2016417 ↗
33. Effect of alloying oxygen on the microstructure and mechanical properties of Zr-based bulk metallic glass10.1016/j.actamat.2021.117345 ↗
34. Substantially enhanced plasticity of bulk metallic glasses by densifying local atomic packing10.1038/s41467-021-26858-9 ↗
35. From brittle to ductile transition: The influence of oxygen on mechanical properties of metallic glasses10.1016/j.jallcom.2021.160023 ↗
36. Enhanced heterogeneity and plasticity in a Zr-Cu-Al bulk metallic glass with micro-addition of oxygen10.1016/j.msea.2021.142222 ↗
37. Data-driven discovery of a universal indicator for metallic glass forming ability10.1038/s41563-021-01129-6 ↗
38. Stabilization of metallic supercooled liquid and bulk amorphous alloys10.1016/S1359-6454(99)00300-6 ↗
39. Reduced glass transition temperature and glass forming ability of bulk glass forming alloys10.1016/S0022-3093(00)00064-8 ↗
40. A new glass-forming ability criterion for bulk metallic glasses10.1016/S1359-6454(02)00166-0 ↗
41. Preparation of bulky zr-based amorphous-alloys by a zone-melting method10.2320/matertrans1989.35.923 ↗
42. Relating melting temperature with structure heterogeneity and plasticity of Zr57Cu20Al10Ni8Ag5 bulk metallic glass10.1016/j.jnoncrysol.2020.120100 ↗
43. Relating fracture toughness to micro-pillar compression response for a laser powder bed additive manufactured bulk metallic glass10.1016/j.msea.2019.138535 ↗
44. Effects of Ag addition on crystallization, microstructure and mechanical properties of Zr-Cu-Ni-Al-Ag bulk metallic glasses10.1016/j.jallcom.2012.10.101 ↗
45. Icosahedral and dodecagonal quasicrystal plus glass alloys with plastic deformability10.1016/j.actamat.2020.08.009 ↗
46. Effects of additional Ag on the thermal stability and glass-forming ability of Cu-Zr binary glassy alloys10.1016/j.msea.2007.02.001 ↗
47. Unusual glass-forming ability of bulk amorphous alloys based on ordinary metal copper10.1103/PhysRevLett.92.245504 ↗
48. The effect of Ag addition on the non-isothermal crystallization kinetics and fragility of Zr56Co28Al16 bulk metallic glass10.1016/j.jnoncrysol.2017.10.026 ↗
49. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
50. Enhanced plasticity and corrosion resistance in Mg-Zn-Ca-Cu amorphous alloy composite via plasma electrolytic oxidation treatment10.3390/met12020300 ↗