Medium entropy stabilized disordered LiNi0.5Mn1.5O4 cathode with enhanced electrochemical performance
Source abstract
Abstract
High entropy electrode materials have attracted extensive attention due to their excellent structure stability during cycling, leading to super long cycle life. However, the traditional equimolar strategy is not suitable for electrode materials if high-capacity is considered. Here, we successfully prepared LiNi 0.5Mn 1.5O 4 cathode with high stability and long cycle life by using a multiple-element doping strategy (medium entropy). Combining with differential scanning calorimetry (DSC), Raman spectra and X-ray photoelectron spectroscopy, it is found that Co, Cr, Al co-doped LiNi 0.5Mn 1.5O 4 (medium entropy sample) exhibits disordered structure (Fd 3 ̅ m) with limited Mn 3+ and enriched Al 3+ on the surface, which can inhibit the dissolution of Mn 2+ ions and surface side reaction. With disordered structure and medium entropy, the Li + ion diffusivity in co-doped LiNi 0.5Mn 1.5O 4 is improved, leading to better rate performance. In-situ X-ray diffraction indicates mostly solid solution process in co-doped LiNi 0.5Mn 1.5O 4 and less volume change (5.4 % vs. 5.8 % in undoped sample) during charge-discharge. Owing to the better structure and interface stability, co-doped LiNi 0.5Mn 1.5O 4 shows excellent cycle stability, with 92 % capacity retention after 500 cycles at 1 C rate. Meanwhile, the specific capacity of the medium entropy sample is even increased from 132 mAh/g to 138 mAh/g, proving the advantage of medium entropy strategy in electrode materials.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Semiconductor materials and devices · Advanced Memory and Neural Computing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Phase transition induced cracking plaguing layered cathode for sodium-ion battery10.1016/j.nanoen.2018.09.073 ↗
2. Dopant segregation boosting high‐voltage cyclability of layered cathode for sodium ion batteries10.1002/adma.201904816 ↗
3. Ultralow volume change of P2–type layered oxide cathode for na‐ion batteries with controlled phase transition by regulating distribution of Na+10.1002/ange.202108109 ↗
4. Approaching the capacity limit of lithium cobalt oxide in lithium ion batteries via lanthanum and aluminium doping10.1038/s41560-018-0180-6 ↗
5. N-doped porous carbon nanofibers embedded with TiN nanoparticles for high-performance Li–S batteries10.1080/21663831.2021.1979118 ↗
6. Trace doping of multiple elements enables stable battery cycling of LiCoO2 at 4.6 V10.1038/s41560-019-0409-z ↗
7. Spray-drying synthesis of fluorine-doped LiNi0.5Mn1.5O4 as high-voltage cathodes for lithium-ion batteries10.1016/j.jallcom.2022.167641 ↗
8. Unravelling the impact of reaction paths on mechanical degradation of intercalation cathodes for lithium-ion batteries10.1021/jacs.5b06178 ↗
9. Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries10.1038/s41560-018-0191-3 ↗
10. Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries10.1038/ncomms14101 ↗
11. A medium-entropy transition metal oxide cathode for high-capacity lithium metal batteries10.1038/s41467-022-33927-0 ↗
12. Cation-disordered rocksalt-type high-entropy cathodes for Li-ion batteries10.1038/s41563-020-00816-0 ↗
13. NaMn0.2Fe0.2Co0.2Ni0.2Ti0.2O2 high-entropy layered oxide – experimental and theoretical evidence of high electrochemical performance in sodium batteries10.1016/j.ensm.2022.02.038 ↗
14. Using high-entropy configuration strategy to design NA-ion layered oxide cathodes with superior electrochemical performance and thermal stability10.1021/jacs.2c02353 ↗
15. Compositionally complex doping for zero-strain zero-cobalt layered cathodes10.1038/s41586-022-05115-z ↗
16. Trace doping of multiple elements enables stable cycling of high areal capacity LiNi0.5Mn1.5O4 cathode10.1002/smll.202106898 ↗
17. Design principles for zero-strain Li-ion cathodes10.1016/j.joule.2022.05.018 ↗
18. Rational design of quasi-zero-strain NCM cathode materials for minimizing volume change effects in all-solid-state batteries10.1021/acsmaterialslett.9b00441 ↗
19. Neutron diffraction study of electrochemically delithiated LiMn2O4 spinel10.1016/S0167-2738(99)00235-0 ↗
20. Suppressed phase separation in spinel LiNi0.5Mn1.5O4 cathode via interstitial sites modulation10.1016/j.nanoen.2021.106636 ↗
21. Crystallographic‐site‐specific structural engineering enables extraordinary electrochemical performance of high‐voltage LiNi0.5Mn1.5O4 spinel cathodes for lithium‐ion batteries10.1002/adma.202101413 ↗
22. As long cycle‐life high‐voltage spinel lithium‐ion battery electrode achieved by site‐selective doping10.1002/ange.202001454 ↗
23. A comparative study of Fd-3m and P4332 “LiNi0.5Mn1.5O4”10.1016/j.ssi.2011.04.007 ↗
24. Insight into the atomic structure of high-voltage spinel LiNi0.5Mn1.5O4 cathode material in the first cycle10.1021/cm503972a ↗
25. Stabilizing Cathode Materials of Lithium-Ion Batteries by Controlling Interstitial Sites on the Surface10.1016/j.chempr.2018.04.020 ↗
26. Utilizing fast ion conductor for single-crystal Ni-rich cathodes to achieve dual-functional modification of conductor network constructing and near-surface doping10.1016/j.ensm.2022.07.029 ↗
27. Stabilizing high‐voltage LiNi0.5Mn1.5O4 cathodes for high energy rechargeable li batteries by coating with organic aromatic acids and their Li salts10.1002/smtd.202200674 ↗
28. Enabling a co-free, high-voltage LiNi0.5Mn1.5O4 cathode in all-solid-state batteries with a halide electrolyte10.1021/acsenergylett.2c01397 ↗
29. High rate capability of 5 V LiNi0.5Mn1.5O4 cathode material synthesized via a microwave assist method10.1016/j.jallcom.2016.10.186 ↗
30. M. Aklalouch, J.M. Amarilla, I. Saadoune, J.M. Rojo, LiCr0.2Ni0.4Mn1.4O4 spinels exhibiting huge rate capability at 25 and 55°C: analysis of the effect of the particle size, J. Power Sources, 196 (2011) 10222–10227.10.1016/j.jpowsour.2011.08.069 ↗
31. Tailoring disordered/ordered phases to revisit the degradation mechanism of high‐voltage LiNi0.5Mn1.5O4 spinel cathode materials
32. Granularity control enables high stability and elevated-temperature properties of micron-sized single-crystal LiNi0.5Mn1.5O4 cathodes at high voltage
33. On the electrochemical properties of the Fe–Ti doped LNMO material LiNi0.5Mn1.37Fe0.1Ti0.03O3.9510.1039/D2TA00299J ↗
34. Influence of doping on the cation ordering and charge–discharge behavior of LiMn1.5Ni0.5−xMxO4 (M = Cr, Fe, Co, and Ga) spinels between 5.0 and 2.0 V10.1039/c2ta01171a ↗
35. Phase transition dominated high-rate performances of the high voltage LiNi0.5Mn1.5O4 cathode: improvement on structure evolution and ionic diffusivity by chromium doping10.1021/acs.jpcc.8b09054 ↗
36. Electrochemical properties of LiNi0.5Mn1.5O4 cathode after Cr doping10.1016/j.jpowsour.2005.10.099 ↗
37. Synthesis and electrochemical properties of LiNi0.5−xMn1.5−xM2xO4 (M=Al, Cr) cathode materials prepared by PVA method10.5796/electrochemistry.78.658 ↗
38. Temperature dependence of structural and transport properties for Na3V2(PO4)2F3 and Na3V2(PO4)2F2.5O0.510.1021/acs.chemmater.7b03529 ↗
39. Ion transport and phase transition in Li7−xLa3(Zr2−xMx)O12 (M = Ta5+, Nb5+, x = 0, 0.25)10.1039/C1JM14588F ↗
40. Superionic plastic polymorph of the Na+ conductor Na3PS410.1021/acsmaterialslett.9b00322 ↗
41. High-performance aqueous asymmetric supercapacitor based on hierarchical wheatear-like LiNi0.5Mn1.5O4 cathode and porous Fe2O3 anode
42. Probing the electrode-electrolyte interface in cycled LiNi0.5Mn1.5O4 by XPS using Mg and synchrotron X-rays10.1149/2.0331614jes ↗
43. Study of the formation and evolution of solid electrolyte interface via in-situ electrochemical impedance spectroscopy10.1016/j.apsusc.2022.153572 ↗
44. Enhanced rate performance of carbon-coated LiNi0.5Mn1.5O4 cathode material for lithium ion batteries10.1016/j.electacta.2010.12.109 ↗
45. Diffusion mechanism of lithium ions in LiNi0.5Mn1.5O410.1016/j.electacta.2013.07.034 ↗