journal article·2023-06

Graphene confined core-shell Si@Cu nanoparticles as integrated anode with enhanced capacity and high-rate performance for Li-ion batteries

Jing-Zhou Chen, Meng-Xin Ren, Yun-Lei Hou, Bo-Han Zhang, Wan-Xin Wen, Hua-Ying Wang, Dong-Lin Zhao

Publisher page

Abstract

To cope with volume expansion, poor silicon conductivity and capacity decay due to solid electrolyte interface rupture, rational design of silicon negative electrode is an effective means to cope with the above challenges. We designed a graphene confined Si@Cu core-shell structure (Si@Cu@rGO) as integrated anode, in which the copper shell on the Si nanosurface enhances the electronic conductivity between the silicon particles and graphene. Meanwhile, the flexibility of the copper shell and graphene help suppress the change of electrode morphology during cycling and keep good contact between electrode material and collector. The graphene cladding not only effectively prevents the aggregation of Si@Cu nanoparticles, but also provides enough space for the expansion of silicon during lithiation, while the three-dimensional redox graphene layer builds a conductive structure that accelerates the reaction kinetics of the cell. Thanks to this design, Si@Cu@rGO has a satisfactory electrochemical performance. After 70 cycles in the rate performance test, the specific capacity of Si@Cu@rGO reached 2243.1 mAh g −1.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. A mechanistic study of electrode materials for rechargeable batteries beyond lithium ions by in situ transmission electron microscopy10.1039/D0EE03295F ↗
2. Prelithiation: a crucial strategy for boosting the practical application of next-generation lithium ion battery10.1021/acsnano.0c10664 ↗
3. Li‐ion batteries: recent advances and prospects of atomic substitution on layered positive materials for lithium‐ion battery10.1002/aenm.202170056 ↗
4. Silicon/carbon composite anode synthesized by impregnation of petroleum pitch in nanoporous silicon10.1002/adma.202103095 ↗
5. Three-dimensional porous biogenic Si/C composite for high performance lithium-ion battery anode derived from Equisetum fluviatile10.15541/jim20200525 ↗
6. ZIF-8-derived three-dimensional silicon-carbon network composite for high-performance lithium-ion batteries10.15541/jim20210739 ↗
7. Stable silicon anodes by molecular layer deposited artificial zincone coatings10.1002/adfm.202010526 ↗
8. Design of high-energy-dissipation, deformable binder for high-areal-capacity silicon anode in lithium-ion batteries10.1016/j.cej.2021.129991 ↗
9. Manipulating oxidation of silicon with fresh surface enabling stable battery anode10.1021/acs.nanolett.1c00317 ↗
10. Regulating adhesion of solid-electrolyte interphase to silicon via covalent bonding strategy towards high Coulombic-efficiency anodes10.1016/j.nanoen.2021.105935 ↗
11. In situ synthesis of graphene-coated silicon monoxide anodes from coal-derived humic acid for high-performance lithium-ion batteries10.1002/adfm.202101645 ↗
12. Nest structure comprising copper silicide and silicon nanowires for lithium-ion battery anodes with high areal loading10.1002/smll.202102333 ↗
13. Controllable self-assembled flower-like FeS with N-doped carbon coating anchored on S-doped reduced graphene oxide as high-performance lithium-ion battery anode10.1016/j.jallcom.2022.167244 ↗
14. Scalable preparation of porous silicon nanoparticles and their application for lithium-ion battery anodes10.1007/s12274-013-0293-y ↗
15. High-performance lithium battery anodes using silicon nanowires10.1038/nnano.2007.411 ↗
16. High capacity, reversible silicon thin-film anodes for lithium-ion batteries10.1149/1.1596918 ↗
17. Latest development of nanostructured Si/C materials for lithium anode studies and applications10.1016/j.ensm.2016.02.001 ↗
18. Sandwich nanoarchitecture of Si/reduced graphene oxide bilayer nanomembranes for Li-ion batteries with long cycle life10.1021/nn5048052 ↗
19. Porous nanocomposite anodes of silicon/iron silicide/3D carbon network for lithium-ion batteries10.1016/j.jallcom.2018.08.083 ↗
20. Boosting lithium storage performance of Si nanoparticles via thin carbon and nitrogen/phosphorus co-doped two-dimensional carbon sheet dual encapsulation10.1007/s12598-021-01716-1 ↗
21. Core-shell structured Si@Cu3Si-Cu nanoparticles coated by N-doped carbon as an enhanced capacity and high-rate anode for lithium-ion batteries10.1016/j.jelechem.2022.116973 ↗
22. Core-shell structured Si@Cu nanoparticles encapsulated in carbon cages as high-performance lithium-ion battery anodes10.1016/j.jallcom.2021.159988 ↗
23. The synergetic effects of a multifunctional citric acid and rice husk derived honeycomb carbon matrix on a silicon anode for high-performance lithium ion batteries10.1039/D0SE00078G ↗
24. Characterization of pumice-supported Ag-Pd and Cu-Pd bimetallic catalysts by X-ray photoelectron spectroscopy and X-ray diffraction10.1006/jcat.1998.2343 ↗
25. Ti/Si/Ti sandwich-like thin film as the anode of lithium-ion batteries10.1016/j.jpowsour.2013.09.138 ↗
26. A 3D porous architecture of Si/graphene nanocomposite as high-performance anode materials for Li-ion batteries10.1039/c2jm00120a ↗
27. Horsetail-derived Si@N-doped carbon as low-cost and long cycle life anode for Li-ion half/full cells10.1016/j.electacta.2018.01.088 ↗
28. Synergy effect of CuO on CuCo2O4 for methane catalytic combustion10.1039/D2RA02237K ↗
29. Rational design of a dual‐function hybrid cathode substrate for lithium–sulfur batteries10.1002/aenm.201801014 ↗
30. Self-assembled SnS2 nano-dots@graphene hybrid aerogel as an efficient polysulfide reservoir for high-performance lithium–sulfur Batteries10.1039/C8TA01089G ↗
31. Tuning F-doped degree of rGO: restraining corrosion-promotion activity of EP/rGO nanocomposite coating10.1016/j.jmst.2019.09.043 ↗
32. TiO2@rGO nanocomposite as a photo catalyst for the reduction of Cr6+10.1016/j.materresbull.2018.07.002 ↗
33. Photo-catalytic and anti-microbial activities of rGO/CuO nanocomposite10.1007/s10904-020-01760-x ↗
34. Effect of the green synthesized rGO and Mg/rGO nanocomposites on the phytochemical assay, toxicity, and metabolism of Mentha longifolia in vitro cultures10.1007/s11356-022-18761-7 ↗
35. Gram-scale production of graphene based on solvothermal synthesis and sonication10.1038/nnano.2008.365 ↗
36. Three-dimensionally ordered hierarchically porous polypyrrole loading sulfur as high-performance cathode for lithium/sulfur batteries10.1016/j.polymer.2018.01.022 ↗
37. Characterization of SEI layer formed on high-performance Si-Cu anode in ionic liquid battery electrolyte10.1016/j.elecom.2010.09.003 ↗
38. Can the performance of graphene nanosheets for lithium storage in Li-ion batteries be predicted?10.1039/c2nr11936f ↗
39. A binder-free high silicon content flexible anode for Li-ion batteries10.1039/C9EE02615K ↗
40. Mussel-inspired self-healing metallopolymers for silicon nanoparticle anodes10.1021/acsnano.9b03837 ↗
41. Chemical and mechanical degradation and mitigation strategies for Si anodes10.1016/j.jpowsour.2019.02.054 ↗
42. Si-based materials derived from biomass: synthesis and applications in electrochemical energy storage10.1039/C9TA06934H ↗
43. Electrolytic silicon/graphite composite from SiO2/graphite porous electrode in molten salts as a negative electrode material for lithium-ion batteries10.1007/s12598-020-01702-z ↗
44. Multishelled [email protected] microparticles supported on 3D Cu current collectors for stable and binder-free anodes of lithium-ion batteries10.1021/acsnano.8b00703 ↗
45. Multiple network binders via dual cross-linking for silicon anodes of lithium-ion batteries10.1021/acsaem.1c02231 ↗
46. Consecutive chemical bonds reconstructing surface structure of silicon anode for high-performance lithium-ion battery
47. The role of titanium-deficient anatase TiO2 interlayers in boosting lithium-sulfur battery performance: polysulfide trapping, catalysis and enhanced lithium ion transport10.1039/C9NR10349J ↗
48. Electrochemical impedance spectroscopy study of lithium–sulfur batteries: useful technique to reveal the Li/S electrochemical mechanism10.1016/j.electacta.2020.136944 ↗
49. Rational design of the robust Janus shell on silicon anodes for high-performance lithium-ion batteries10.1021/acsami.9b01909 ↗