journal article·2023-06

Cu1.81S-doped carbon modified copper foam as current collector for high-performance lithium metal batteries

Yunxing Su, Shuai Liu, Jing Shi, Minghua Huang, Zhicheng Shi, Huanlei Wang, Ting Wang

Publisher page

Abstract

Lithium metal battery has shown extraordinary promise for electrochemical energy storage due to high theoretical capacity and low reduction potential. However, its energy density improvement and commercial application are seriously limited by the inevitable formation of dendrites and dead lithium and the infinite change of electrode volume during repeated charge-discharge processes. In this work, a three-dimensional Cu foam decorated with a lithophilic sulfide doped carbon layer (Cu 1.81 S-C@CF) is used as an advanced 3D host for long-life lithium metal anode. The average current density is effectively reduced and the volume change is accommodated by the three-dimensional porous structure. Moreover, the effects of different reaction temperature and time on surface morphology and structure of lithophilic layer on 3D current collector is also systemically studied. The Cu 1.81S-doped carbon layer prepared at a deposition temperature of 800 °C for 2 h (Cu 1.81 S-C@CF-800–2) exhibits excellent lithium dendrite inhibition ability. The symmetrical battery with Cu 1.81S-C@CF-800–2 as a lithium host could operate for over 6000 h with a low overpotential (about 14.9 mV) without intense voltage fluctuation. Moreover, the Li@Cu 1.81S-C@CF-800–2 full battery matched with LiCoO 2 (LCO) cathode exhibits a high initial capacity of 142.78 mAh g −1 and excellent capacity retention of 96.4% at 0.2 C, with an average CE of 99.6% over 120 cycles. This work not only successfully prepares a long-life lithium metal anode, but also provides a new strategy for preparing and optimizing lithophilic layer of 3D current collectors.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Three-dimensional holey-graphene/niobia composite architectures for ultrahigh-rate energy storage10.1126/science.aam5852 ↗
2. Alumina-supported Mn(II), Co(II), Ni(II) and Cu(II) bis(2-hydroxyanil)acetylacetone complexes as catalysts for the oxidation of cyclohexene with tert-butylhydroperoxide10.1016/S1381-1169(03)00128-6 ↗
3. Synthesis and characterization of host (nanodimensional pores of zeolite-Y)–guest [unsaturated 16-membered octaaza–macrocycle manganese(II), cobalt(II), nickel(II), copper(II), and zinc(II) complexes] nanocomposite materials10.1246/cl.2005.1444 ↗
4. Poly (ethylene oxide) based solid polymer electrolyte improved by multifunctional additives of poly (acrylamide) and LiI10.1016/j.electacta.2023.142062 ↗
5. Dendrite‐free reverse lithium deposition induced by ion rectification layer toward superior lithium metal batteries10.1002/adfm.202104081 ↗
6. Bifunctional 3D hierarchical hairy foam toward ultrastable lithium/sulfur electrochemistry10.1002/adfm.202004650 ↗
7. Formulating energy density for designing practical lithium–sulfur batteries10.1038/s41560-022-01001-0 ↗
8. M. Wang, Z. Bai, T. Yang, C. Nie, X. Xu, Y. Wang, J. Yang, S. Dou, N. Wang, Advances in high sulfur loading cathodes for practical lithium‐sulfur batteries, Adv. Energy Mater., 2022.10.1002/aenm.202201585 ↗
9. Redox mediator with the function of intramolecularly disproportionating superoxide intermediate enabled high‐performance Li–O2 batteries10.1002/aenm.202270050 ↗
10. High-energy-density metal-oxygen batteries: lithium-oxygen batteries vs sodium-oxygen batteries10.1002/adma.201606572 ↗
11. Electronic “bridge” construction via Ag intercalation to diminish catalytic anisotropy for 2D tin diselenide cathode catalyst in lithium–oxygen batteries
12. Competitive nucleation and growth behavior in Li–Se batteries10.1039/D1EE03619J ↗
13. State-of-the-art and future challenges in high energy lithium-selenium batteries
14. High-performance all-solid-state Li–Se batteries induced by sulfide electrolytes10.1039/C8EE01621F ↗
15. Regulating uniform Li plating/stripping via dual‐conductive metal‐organic frameworks for high‐rate lithium metal batteries
16. How lithium dendrites form in liquid batteries10.1126/science.aay8672 ↗
17. Advanced porous carbon materials for high-efficient lithium metal anodes10.1002/aenm.201700530 ↗
18. Titanium nitride hollow nanospheres with strong lithium polysulfide chemisorption as sulfur hosts for advanced lithium-sulfur batteries10.1007/s12274-018-2017-9 ↗
19. Lithium metal anodes for rechargeable batteries10.1039/C3EE40795K ↗
20. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
21. Progress on lithium dendrite suppression strategies from the interior to exterior by hierarchical structure designs10.1002/smll.202000699 ↗
22. Constructing conformal interface by semiliquid Li metal10.1016/j.joule.2019.06.019 ↗
23. Interface engineering for lithium metal anodes in liquid electrolyte10.1002/aenm.202001257 ↗
24. Ionogel electrolytes for high‐performance lithium batteries: a review
25. Recent progress on flexible lithium metal batteries: composite lithium metal anodes and solid-state electrolytes10.1016/j.ensm.2020.04.032 ↗
26. In situ study of dendritic growth in lithium/PEO-salt/lithium cells10.1016/S0013-4686(97)10055-X ↗
27. Graphene anchored on Cu foam as a lithiophilic 3D current collector for a stable and dendrite-free lithium metal anode10.1039/C8TA02810A ↗
28. Very high surface capacity observed using Si negative electrodes embedded in copper foam as 3D current collectors10.1002/aenm.201301718 ↗
29. Lithiophilic Ti3C2Tx-modified Cu foam by electrophoretic deposition for dendrite-free lithium metal anodes10.1021/acsaem.1c04035 ↗
30. Cuprite-coated Cu foam skeleton host enabling lateral growth of lithium dendrites for advanced Li metal batteries10.1016/j.ensm.2018.12.007 ↗
31. Oxidation of cyclohexene with tert-butylhydroperoxide and hydrogen peroxide catalyzed by alumina-supported manganese(II) complexes10.1016/S1381-1169(02)00045-6 ↗
32. Lotus-root-like carbon fibers embedded with Ni-Co nanoparticles for dendrite-free lithium metal anodes
33. Lithiophilic Ni3S2 layer decorated nickel foam (Ni3S2@Ni foam) with fast ion transfer kinetics for long-life lithium metal anodes10.1016/j.cej.2022.138384 ↗
34. Superlithiophilic N, S-codoped carbon on Ni foam as a stable 3D host for dendrite-free Li metal anodes
35. Scalable dry production process of a superior 3D net-like carbon-based iron oxide anode material for lithium-ion batteries10.1002/anie.201707647 ↗
36. Ultra‐high fluorine enhanced homogeneous nucleation of lithium metal on stepped carbon nanosheets with abundant edge sites10.1002/aenm.202103123 ↗
37. Metal/nanocarbon layer current collectors enhanced energy efficiency in lithium-sulfur batteries10.1016/j.scib.2017.09.007 ↗
38. Redistributing Li-ion flux and homogenizing Li-metal growth by N-doped hierarchically porous membranes for dendrite-free Lithium metal batteries10.1016/j.ensm.2021.02.015 ↗
39. Advanced Li metal anode by fluorinated metathesis on conjugated carbon networks10.1039/D0EE02827D ↗
40. CoO nanofiber decorated nickel foams as lithium dendrite suppressing host skeletons for high energy lithium metal batteries10.1016/j.ensm.2018.05.017 ↗
41. ZnO nanoarray-modified nickel foam as a lithiophilic skeleton to regulate lithium deposition for lithium-metal batteries10.1039/C9TA00862D ↗
42. Sandwiched Li plating between lithiophilic-lithiophobic gradient silver@fullerene interphase layer for ultrastable lithium metal anodes10.1016/j.cej.2021.132156 ↗
43. Magnetic field responsive microspheres with tunable structural colors by controlled assembly of nanoparticles10.1039/D1RA09028C ↗
44. Surface modification of carbon fiber cloth with graphene oxide through an electrophoresis method for lithium metal anode10.1016/j.carbon.2022.12.034 ↗
45. Realizing stable lithium deposition by in situ grown Cu2S nanowires inside commercial Cu foam for lithium metal anodes10.1039/C8TA10341K ↗
46. Reactivity of transition metal (Co, Ni, Cu) sulphides versus lithium: The intriguing case of the copper sulphide10.1016/j.solidstatesciences.2006.01.013 ↗
47. Synthesis and characterization of CeO 2 nanoparticles via hydrothermal route10.1016/j.jiec.2014.05.046 ↗
48. Electrochemical hydrogen storage capacity and optical properties of NiAl2O4/NiO nanocomposite synthesized by green method10.1016/j.ijhydene.2016.10.132 ↗
49. Flexible ligand synthesis, characterization and catalytic oxidation of cyclohexane with host (nanocavity of zeolite-Y)/guest (Mn(II), Co(II), Ni(II) and Cu(II) complexes of tetrahydro-salophen) nanocomposite materials10.1016/j.micromeso.2008.03.015 ↗
50. CdS-Cu1.81S heteronanorods with continuous sublattice for photocatalytic hydrogen production10.1016/j.apcatb.2021.120909 ↗
51. Spatially confined “edge‐to‐edge” strategy for achieving compact Na+/K+ storage: constructing hetero‐Ni/Ni3S2 in densified carbons
52. Insights into impacts of Co3O4-CeO2 nanocomposites on the electrochemical hydrogen storage performance of g-C3N4: Pechini preparation, structural design and comparative study10.1016/j.jallcom.2022.166564 ↗
53. Core-shell sulfur@polypyrrole composites as high-capacity materials for aqueous rechargeable batteries10.1039/c2nr33590e ↗
54. Tri-functional copper sulfide as sulfur carrier for high-performance lithium-sulfur batteries10.1149/2.0871707jes ↗
55. Protein-modified SEI formation and evolution in Li metal batteries10.1016/j.jechem.2022.06.017 ↗
56. Bi nanoparticles in situ encapsulated by carbon film as high-performance anode materials for Li-ion batteries10.1016/j.jechem.2022.01.026 ↗
57. Stabilized and almost dendrite-free Li metal anodes by in situ construction of a composite protective layer for Li metal batteries10.1021/acsami.1c20826 ↗
58. Fast ion transport at solid–solid interfaces in hybrid battery anodes10.1038/s41560-018-0096-1 ↗
59. Stable lithium anode enabled by biphasic hybrid SEI layer toward high-performance lithium metal batteries10.1016/j.cej.2021.133570 ↗
60. Highly active cluster structure manganese‐based metal organic frameworks (Mn‐MOFs) like corals in the sea synthesized by facile solvothermal method as gas electrode catalyst for lithium‐oxygen batteries10.1002/er.4954 ↗