Grain boundary engineering process for nano reinforced aluminum matrix composites
Source abstract
Abstract
It is challenging to obtain a balance of strength and ductility for alloys and their composites. They are expected to exhibit good comprehensive properties by adjusting the grain boundary character and/or introducing twin structures. However, for coarse grained aluminum with high stacking fault energies, twin structures are rarely found. In this study, a grain boundary engineering process was carried out on coarse grained aluminum containing nano-reinforcements via an alternated compression deformation, followed by an annealing treatment. The effects of the thermo-mechanical process and alloy elements on the microstructures of the composites were analyzed. The mechanical properties and inter-granular corrosion properties of the composites were evaluated. Twin structures could be generated in these alloys. After thermo-mechanical process, the composites exhibited good plasticity as well as higher strength. A Σ3 twin boundary hindered inter-granular corrosion crack propagation . The formation mechanism of the twin structures and the strengthening mechanism are discussed.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Microstructure and mechanical properties of aluminum alloy matrix composite reinforced with nano-particle MgO10.1016/j.jallcom.2009.04.117 ↗
2. Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles10.1038/nature16445 ↗
3. Structural effects on grain boundary segregation, hardening and fracture
4. Twinning-related grain boundary engineering10.1016/j.actamat.2004.05.031 ↗
5. Mechanisms of grain boundary engineering10.1016/j.actamat.2005.11.046 ↗
6. The interaction mechanism of screw dislocations with coherent twin boundaries in different face-centred cubic metals10.1016/j.scriptamat.2005.11.072 ↗
7. Twinning effects on strength and plasticity of metallic materials10.1557/mrs.2016.67 ↗
8. Interfacial plasticity governs strain rate sensitivity and ductility in nanostructured metals10.1073/pnas.0611097104 ↗
9. Epitaxial nanotwinned Cu films with high strength and high conductivity10.1063/1.2969409 ↗
10. Evolution of grain boundary character distributions in alloy 825 tubes during high temperature annealing: Is grain boundary engineering achieved through recrystallization or grain growth?10.1016/j.matchar.2016.11.016 ↗
11. A grain boundary engineering approach to promote special boundaries in Pb-base alloy10.1016/S0921-5093(02)00919-X ↗
12. Effect of grain boundary engineering on the microstructure and mechanical properties of copper containing austenitic stainless steel10.1016/j.msea.2014.11.053 ↗
13. stacking fault of aluminum for multilayered TiB2/Al-Ni composite by roll bonding process10.1016/j.msea.2011.12.016 ↗
14. Deformation twinning in nanocrystalline Al by molecular-dynamics simulation10.1016/S1359-6454(02)00318-X ↗
15. A nucleation mechanism of deformation twins in pure aluminum10.1016/j.actamat.2009.06.014 ↗
16. Quasicontinuum study on formation of fivefold deformation twin in nanocrystalline aluminum10.1016/j.scriptamat.2009.12.005 ↗
17. Exploring the possibility of deformation twinning in pure aluminum10.1007/s40195-016-0436-8 ↗
18. High-velocity projectile impact induced 9R phase in ultrafine-grained aluminium10.1038/s41467-017-01729-4 ↗
19. Deformation twins formed in nanocrystalline materials10.4028/www.scientific.net/MSF.503-504.125 ↗
20. Deformation twin in Al-4.8wt% Mg10.1016/0001-6160(88)90242-8 ↗
21. On the role of twinning in the recrystallization of aluminium10.1016/1359-6462(96)00105-4 ↗
22. Precipitation twinning10.1016/j.actamat.2007.05.007 ↗
23. Nanocrystals Get twins10.1126/science.1085577 ↗
24. Effect of grain boundary characteristic on intergranular corrosion and mechanical properties of severely sheared Al-Zn-Mg-Cu alloy10.1016/j.msea.2018.06.097 ↗
25. Preparation of MgAl2O4-coated Al2O3np and migration of ceramic nanoparticles during ultrasonic processing of aluminum matrix composites10.3390/coatings10111039 ↗
26. Texture evolution in twin-roll strip cast non-oriented electrical steel with strong Cube and Goss texture10.1016/j.actamat.2020.08.048 ↗
27. Solid-liquid interface dynamics during solidification of Al 7075-Al2O3np based metal matrix composites10.1016/j.matdes.2016.01.042 ↗
28. T1 precipitate band and particle stimulated nucleation in 2195 Al-Cu-Li alloy during hot deformation10.1016/j.jallcom.2022.164716 ↗
29. Yu · 2013
30. Ab initio calculations of the generalized stacking fault energy in aluminium alloys10.1016/j.scriptamat.2011.01.034 ↗
31. Boundaries and interfaces in ultrafine grain composites10.1016/j.actamat.2011.08.005 ↗
32. Formation of ∑3{110} incoherent twin boundaries through geometrically necessary boundaries in an Al-8Zn alloy subjected to one pass of equal channel angular pressing10.1016/j.jallcom.2018.05.168 ↗
33. Deformation induced microtwins and stacking faults in aluminum single crystal10.1103/PhysRevLett.101.115505 ↗
34. A nucleation mechanism of deformation twins in pure aluminum10.1016/j.actamat.2009.06.014 ↗
35. Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy10.1016/j.actamat.2013.09.042 ↗
36. Effect of twins on the storage capacity of dislocations in submicron-crystalline pure copper
37. Strong crystal size effect on deformation twinning10.1038/nature08692 ↗
38. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗
39. Hall-Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
40. A tri-modal aluminum based composite with super-high strength10.1016/j.scriptamat.2005.05.004 ↗