Microstructure and properties of Cu-Al-Ni-Mn-Y alloy with precipitation and effective strengthening by aging treatment
Source abstract
Abstract
The Cu-11Al-3Ni-2.5Mn-1Y alloy prepared by hot-press sintering was subjected to aging treatment at different temperatures of 350 °C, 400 °C, 450 °C, 500 °C and 550 °C, respectively. The phase composition, microstructure, mechanical and damping properties were characterized. The results show that the alloys after the ageing treatment are mainly composed of 18 R martensite and 2 H martensite. The precipitation phase begins to appear and the best comprehensive properties are obtained at the aging temperature of 450 °C. The hardness and strength values reached 347.6 HV and 642.6 MPa, respectively. The strengthening mechanisms are mainly involved in lattice distortion and dislocation increment effect caused by solution strengthening, shearing and hindering effect of precipitated phases and dislocations, fine grain strengthening effect caused by grain size reduction, and the increase of large angle grain boundary. Simultaneously, the room temperature damping reached 0.0723, which is 93 % higher than the original sample of 0.38. The improvement of damping properties is closely related to the changes in the number and size of martensite, the interfacial damping effect caused by precipitated phases, and the pinning and unpinning reaction between dislocations and precipitated phases. Therefore, alloys with both high mechanical and high damping properties can be obtained by proper aging treatment. In addition, the increase in phase transition temperature of high temperature damping properties also provides some guidance for the exploration and development of this alloy in the high temperature field.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Vibration damping mechanism of CuAlMn/polymer/carbon nanomaterials multi-scale composites10.1016/j.compositesb.2020.108266 ↗
2. Effect of heat treatment on the two internal friction peaks in a Cu–Al–Mn shape memory alloy10.1016/j.jallcom.2009.11.072 ↗
3. Effects of parent phase aging and nb element on the microstructure, martensitic transformation, and damping behaviors of a Cu–Al–Mn shape memory alloy
4. Characteristics of Cu–Al–Mn-based shape memory alloys and their applications10.1016/j.msea.2003.12.048 ↗
5. Mechanical behaviour and damping properties of Ni modified Cu–Zn–Al shape memory alloys
6. Microstructural, mechanical, and damping properties of a Cu-based shape memory alloy refined by an in situ LaB6/Al inoculant10.1007/s11661-019-05153-9 ↗
7. Effect of Ni and Mn additions on the damping characteristics of Cu-Al-Fe based high temperature shape memory alloys
8. Achieving high damping capacity and strength simultaneously in a high-zinc aluminum alloy via melt spinning and hot extrusion10.1016/j.msea.2021.142376 ↗
9. Novel laminated multi-layer graphene/Cu–Al–Mn composites with ultrahigh damping capacity and superior tensile mechanical properties10.1016/j.carbon.2021.11.055 ↗
10. Achieved improvement of damping capacity in Ti Ni shape memory alloy through He-ion irradiation10.1016/j.matchar.2021.111417 ↗
11. Internal friction of Ti–Ni–Cu ternary shape memory alloys10.1016/j.msea.2003.05.003 ↗
12. Laser powder bed fusion of the Mn-Cu alloys: printability, microstructure, and mechanical properties10.1016/j.jallcom.2021.163385 ↗
13. High-damping properties of Mn–Cu sintered alloys10.1016/j.msea.2006.05.163 ↗
14. Microstructure, mechanical properties and damping capacity of Fe-Mn-Co Alloys reinforced with graphene10.1016/j.jallcom.2022.167547 ↗
15. Effect of high strain amplitude and pre-deformation on damping property of Fe-Mn alloy10.1016/j.jallcom.2018.08.099 ↗
16. Higher damping capacity induced by negative magnetostriction of Fe-16Cr-2.5Mo-0∼0.2V alloys10.1016/j.jallcom.2020.156673 ↗
17. Magnetostriction and damping of forced vibrations in Fe-Cr-Mo-Al alloy10.1016/j.matlet.2022.131863 ↗
18. Microstructure and properties of Cu-10 wt%Fe alloy produced by double melt mixed casting and multi-stage thermomechanical treatment10.1016/j.jallcom.2019.153323 ↗
19. Potential of superelastic Cu-Al-Mn alloy bars for seismic applications10.1002/eqe.1029 ↗
20. Methods of fabricating Cu-Al-Ni shape memory alloys10.1016/j.jallcom.2018.03.390 ↗
21. Influence of Silver nanoparticles addition on the phase transformation, mechanical properties and corrosion behaviour of Cu–Al–Ni shape memory alloys10.1016/j.jallcom.2014.05.173 ↗
22. Relationship between transformation temperatures and alloying elements in Cu–Al–Ni shape memory alloys10.1007/s10973-013-3145-9 ↗
23. Effect of milling parameters on processing, microstructure and properties of Cu–Al–Ni–Ti shape memory alloys10.1179/1743290115Y.0000000002 ↗
24. Ageing behavior in the Cu–10wt%Al and Cu–10wt%Al–4wt%Ag alloys10.1016/j.jallcom.2008.05.072 ↗
25. Microstructure and properties of Cu–Al–Ni shape memory alloy strips prepared via hot densification rolling of argon atomized powder preforms10.1016/j.msea.2011.09.046 ↗
26. Cyclic stress-strain response of directionally solidified polycrystalline Cu-Al-Ni shape memory alloys10.1016/j.jallcom.2017.04.234 ↗
27. Studies on the effect of grain refinement and thermal processing on shape memory characteristics of Cu–Al–Ni alloys10.1088/0964-1726/14/5/013 ↗
28. Effect of Sm doping on the microstructure, mechanical properties and shape memory effect of Cu-13.0Al-4.0Ni alloy10.3390/ma14144007 ↗
29. Effect of Ta addition on microstructures, mechanical and damping properties of Cu–Al–Mn–Ti alloy10.1016/j.jmrt.2021.10.031 ↗
30. Effects of alloying, heat treatment and nanoreinforcement on mechanical properties and damping performances of Cu–Al-based alloys: A review10.1515/ntrev-2021-0101 ↗
31. Effect of Y on microstructure, damping properties and mechanical properties of Cu-Al-Ni-Mn alloy10.1016/j.matlet.2021.131170 ↗
32. Effects of aging on the structure and damping behaviors of a novel porous CuAlMn shape memory alloy fabricated by sintering–dissolution method10.1016/j.msea.2014.07.080 ↗
33. Effect of aging on the structure and transformation behavior of Cu–12Al–3.5Ni–0.7Ti–0.05RE high temperature shape memory alloy10.1007/s12540-019-00376-2 ↗
34. X-phase precipitation in aging of Cu–Al–Ni–xTi shape memory alloys and its influence on phase transition behavior10.1007/s10973-015-4894-4 ↗
35. Strong heating rate-dependent deterioration of shape memory effect in up/step quenched Cu-based alloys: A ductile Cu Al Mn alloy as an example10.1016/j.actamat.2016.04.004 ↗
36. Effect of composition and ageing on damping characteristics of Cu–Al–Mn shape memory alloys10.1016/j.msea.2007.05.073 ↗
37. Effects of aging on a spray-formed Cu-Al-Ni-Mn-Nb high temperature shape memory alloy10.1016/j.msea.2019.03.024 ↗
38. Abnormal grain growth in annealing cast Cu–Al–Mn–V alloys and their superelasticity10.1088/1361-665X/ab0b73 ↗
39. Ageing study of Cu–Al–Be hypoeutectoid shape memory alloy10.1016/j.matchar.2010.07.009 ↗
40. A re-investigation: Effect of powder metallurgy parameters on the physical and mechanical properties of aluminium matrix composites
41. Deformation behavior of superalloy powder compact under hot isostatic pressing10.1002/adem.202000534 ↗
42. Microstructures and properties of graphene nanoplatelets reinforced Cu/Ti3SiC2/C nanocomposites with efficient dispersion and strengthening achieved by high-pressure torsion10.1016/j.matchar.2022.112308 ↗
43. Effect of precipitation during parent phase aging on the microstructure and properties of a refined CuAlMn shape memory alloy10.1016/j.msea.2018.09.037 ↗
44. Microstructure and superelasticity control by rolling and heat treatment in columnar-grained Cu-Al-Mn shape memory alloy10.1016/j.msea.2017.04.085 ↗
45. Effect of trace silicon addition on microstructure and properties of a Cu–0.26Cr–0.14Mg alloy10.1016/j.msea.2021.142511 ↗
46. Structural changes of tempered martensitic 9%Cr–2%W–3%Co steel during creep at 650°C10.1016/j.msea.2011.12.020 ↗
47. The evolution of microstructure and properties of a Cu–Ti–Cr–Mg–Si alloy with high strength during the multi-stage thermomechanical treatment10.1016/j.msea.2020.140510 ↗
48. Effect of stress-aging treatment on the mechanical and corrosion properties of Al−Zn−Mg−Cu alloy10.1016/j.msea.2022.142791 ↗
49. Effect of rapid solidification on mechanical properties of Cu-Al-Ni shape memory alloys10.1007/BF00540706 ↗
50. A shape-memory alloy for high-temperature applications
51. Microstructure analysis and low-cycle fatigue behavior of spray-formed Al–Li alloy 2195 extruded plate10.1016/j.msea.2018.11.053 ↗
52. Microstructural evolution, damping and tensile mechanical properties of multilayer Zn–22Al alloy fabricated by accumulative roll bonding (ARB)10.1016/j.msea.2022.142911 ↗
53. Transition from many domain to single domain martensite morphology in small-scale shape memory alloys10.1016/j.actamat.2013.06.003 ↗
54. Evaluation of shape memory effect and damping characteristics of Cu–Al–Be–Mn shape memory alloys10.1016/j.pisc.2016.04.041 ↗
55. Influence of chemical composition on the damping characteristics of Cu–Al–Ni shape memory alloys10.1016/j.matchemphys.2010.09.077 ↗
56. Simultaneous improvement of strength and damping capacities of Mg-8Li-6Y–2Zn alloy by heat treatment and hot rolling10.1016/j.jallcom.2022.167027 ↗
57. Effect of Ti addition on the damping and mechanical properties of solid-solution FeCrCoNi alloys10.1016/j.jallcom.2022.166060 ↗
58. Synergizing mechanical properties and damping capacities in a lightweight Al-Zn-Li-Mg-Cu alloy10.1016/j.jallcom.2021.161285 ↗