journal article·2023-03

The coupling strengthening effect of in situ nanoparticles and rare earth in AA6111 matrix composites

Wei Qian, Xizhou Kai, Ran Tao, Chuang Guan, Rui Cao, Yutao Zhao

Publisher page

Abstract

Differed from the traditional aluminum alloy enhanced by single strengthening phase, a new design of AA6111–3ZrB 2-0.3Er-0.1Zr composites reinforced by in situ ZrB 2 nanoparticles and Er, Zr was proposed in this work. The coupling effect includes two aspects: the distribution of ZrB 2 particles has been significantly improved by rare earth Er and the strain field on surface of ZrB 2 particles intensified the precipitation behavior of Al 3 (Er, Zr). Besides, contributed by the coupling effect of these two different strengthening phases, a fine and uniform DRXed grain structure was obtained after hot extrusion. The YS (Yield Strength), UTS (Ultimate Tensile Strength) and EL (Elongation) of as-extruded AA6111–3ZrB 2 -0.3Er-0.1Zr composites at room temperature and 573 K were high up to 372.8 MPa, 420.5 MPa, 30.6% and 135.3 MPa, 156.7 MPa, 46.7% respectively. The coupling strengthening effect was always stronger than that strengthened by single ZrB 2 particles or Al 3(Er, Zr) precipitates. What’s more, both ZrB 2 particles and Al 3(Er, Zr) precipitates with core-shell structure belong to thermal stable phases, which was exactly the main reason why AA6111–3ZrB 2-0.3Er-0.1Zr composites could maintain the prominent performances even in high temperature environment.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Effects of nanosized TiCp on the microstructure evolution and tensile properties of an Al-Mg-Si alloy during cold rolling10.1016/j.msea.2018.11.078 ↗
2. Improvement of mechanical properties of a cryorolled Al-Mg-Si alloy through warm rolling and aging10.1016/j.jallcom.2018.11.012 ↗
3. In situ study on fracture behaviors of SiC/2A14Al composite joint:Co-construction of microstructure and mechanical properties via laser welding10.1016/j.compositesb.2022.109882 ↗
4. Interface formation and bonding control in high-volume-fraction (TiC+TiB2)/Al composites and their roles in enhancing properties10.1016/j.compositesb.2021.108605 ↗
5. Enhanced age-hardening behavior in Al–Cu alloys induced by in-situ synthesized TiC nanoparticles10.1016/j.jmst.2018.09.029 ↗
6. Enhanced mechanical properties of 6082 aluminum alloy via SiC addition combined with squeeze casting10.1016/j.jmst.2021.01.077 ↗
7. Enhancing strength and ductility of AlSi10Mg fabricated by selective laser melting by TiB2 nanoparticles10.1016/j.jmst.2021.08.030 ↗
8. Enhanced grain refinement and mechanical properties of a high–strength Al–Zn–Mg–Cu–Zr alloy induced by TiC nano–particles10.1016/j.msea.2021.140852 ↗
9. Enhancing strength-ductility synergy and mechanisms of Al-based composites by size-tunable in-situ TiB2 particles with specific spatial distribution10.1016/j.compositesb.2021.108912 ↗
10. Effect of Al-3 wt% Al2O3 master alloy fabricated by calcined kaolin on grain refinement and mechanical properties of A356 alloy10.1016/j.jallcom.2020.158512 ↗
11. Effects of ultrasonic vibration on microstructure and mechanical properties of nano-sized SiC particles reinforced Al-5Cu composites10.1016/j.ultsonch.2017.12.038 ↗
12. A developed method for producing in situ TiC/Al composites by using quick preheating treatment and ultrasonic vibration10.1016/j.compositesb.2011.11.004 ↗
13. Preparation of Al matrix nanocomposites by diluting the composite granules containing nano-SiCp under ultrasonic vibaration10.1016/j.jmst.2018.01.003 ↗
14. Effect of electric current pulses on TiB2 particle dispersion in aluminum alloy melt10.1016/j.matlet.2020.127981 ↗
15. Nano-phase transformation of composite precipitates in multicomponent Al-Mg-Si(-Sc) alloys10.1016/j.jmst.2021.09.037 ↗
16. Correlation between precipitates evolution and mechanical properties of Al-Sc-Zr alloy with Er additions10.1016/j.jmst.2021.05.031 ↗
17. Microstructure and mechanical properties of novel Al-Y-Sc alloys with high thermal stability and electrical conductivity10.1016/j.jmst.2019.08.006 ↗
18. Influence of Er content on microstructural evolution and mechanical properties of Al-2Fe alloy10.1016/j.jallcom.2021.162416 ↗
19. Mn and Mo additions to a dilute Al-Zr-Sc-Er-Si-based alloy to improve creep resistance through solid-solution- and precipitation-strengthening10.1016/j.actamat.2020.04.022 ↗
20. Effects of Zn and Cr additions on precipitation and creep behavior of a dilute Al–Zr–Er–Si alloy10.1016/j.actamat.2019.09.055 ↗
21. The relation between mechanical properties and microstructural evolution induced by Sc microalloying in Al-20Zn-3Cu alloy10.1016/j.jallcom.2021.161719 ↗
22. Er addition to Al-Si-Mg-based casting alloy: Effects on microstructure, room and high temperature mechanical properties10.1016/j.jallcom.2017.03.076 ↗
23. Influence of cold rolling and thermal treatment on microstructure and texture evolution, and tensile behaviour of high strength Al-Co-Sc-Zr alloys10.1016/j.jallcom.2022.164427 ↗
24. Microstructure and properties of novel Al-Ce-Sc, Al-Ce-Y, Al-Ce-Zr and Al-Ce-Sc-Y alloy conductors processed by die casting, hot extrusion and cold drawing10.1016/j.jmst.2020.03.073 ↗
25. Coarsening kinetics and strengthening mechanisms of core-shell nanoscale precipitates in Al-Li-Yb-Er-Sc-Zr alloy10.1016/j.jmst.2020.05.061 ↗
26. Effect of dislocations, Al3(Sc,Zr) distribution and ageing temperature on θ′ precipitation in Al-Cu-(Sc)-(Zr) alloys10.1016/j.mtla.2020.100610 ↗
27. The effect of sc addition on microstructure and mechanical properties of as-cast Zr-containing Al-Cu alloys10.1016/j.jallcom.2022.164686 ↗
28. Improvement of particles distribution of in-situ 5 vol% TiB2 particulates reinforced Al-4.5Cu alloy matrix composites with ultrasonic vibration treatment10.1016/j.jallcom.2016.09.013 ↗
29. Preparation of hybrid particulates SiCnp and Mg2Si reinforced Al-Cu matrix composites10.1016/j.msea.2019.02.076 ↗
30. Diffusion-defining atomic-scale spinodal decomposition within nanoprecipitates10.1038/s41563-018-0209-z ↗
31. Correlative characterization of primary Al3(Sc,Zr) phase in an Al–Zn–Mg based alloy10.1016/j.matchar.2015.01.018 ↗
32. Characteristics of microstructural and mechanical evolution in 6111Al alloy containing Al3(Er,Zr) nanoprecipitates10.1016/j.matchar.2021.111310 ↗
33. Correlation between tensile properties, microstructure, and processing routes of an Al–Cu–Mg–Ag–TiB2 (A205) alloy: Additive manufacturing and casting10.1016/j.msea.2022.142989 ↗
34. Ambient- and elevated temperature properties of Sc- and Zr-modified Al–6Ni alloys strengthened by Al3Ni microfibers and Al3(Sc,Zr) nanoprecipitates10.1016/j.msea.2022.142963 ↗
35. Effect of pseudo cross-rolling on the recrystallization texture of a continuous cast Al–Mg alloy10.1016/j.scriptamat.2009.01.015 ↗
36. Dynamic dissolution and texture evolution of an Al–Cu–Mg–Ag alloy during hot rolling10.1016/j.jallcom.2020.154254 ↗
37. Ultrasonic-assisted synthesis of surface-clean TiB2 nanoparticles and their improved dispersion and capture in Al-matrix nanocomposites10.1021/am402719p ↗
38. Mechanism of Sc poisoning of Al-5Ti-1B grain refiner10.1016/j.scriptamat.2020.01.031 ↗
39. Atomic-scale investigation of the interface precipitation in a TiB2 nanoparticles reinforced Al–Zn–Mg–Cu matrix composite10.1016/j.actamat.2019.11.068 ↗
40. Ultrafine-grained Al–0.2Sc–0.1Zr alloy: The mechanistic contribution of nano-sized precipitates on grain refinement during the novel process of accumulative continuous extrusion10.1016/j.actamat.2015.08.043 ↗
41. Microstructure behavior of Al–Mg–Sc alloy processed by ECAP at elevated temperature10.1016/j.actamat.2007.10.029 ↗
42. Effects of Er and Zr additions on precipitation and recrystallization of pure aluminum10.1016/j.scriptamat.2012.09.026 ↗
43. Effects of nanosized particles on microstructure and mechanical properties of an aged in-situ TiB2/Al-Cu-Li composite10.1016/j.msea.2018.11.032 ↗
44. Microstructures and properties of Al–Zn–Mg–Mn alloy with trace amounts of Sc and Zr10.1016/j.msea.2014.08.024 ↗
45. Effects of texture component, dislocation evolution and precipitation on the creep resistance of T5-treated Al-Mg-Si alloy with different Cu contents10.1016/j.matchar.2022.111981 ↗
46. Enhancing creep formability and comprehensive property in Al–Mg–Si alloy by combinatorial pre-ageing and large pre-deformation10.1016/j.msea.2021.141967 ↗
47. Superior creep resistance of 0.3 wt% nano-sized TiCp/Al-Cu composite10.1016/j.msea.2017.05.101 ↗