Heat treatment effects on the electrochemical behavior of pore-free Ti6Al4V ELI fabricated by laser powder bed fusion in fluoride-containing chloride solution
Source abstract
Abstract
The heat treatment effects on the corrosion behavior of Ti6Al4V ELI fabricated by laser powder bed fusion (LPBF) are revisited, and comprehensive microstructural characterization and statistical electrochemical tests are carried out on the pore-free microelectrodes. Compared with the heat-treated (HT, 950 ℃ for 2 h) LPBF Ti6Al4V counterparts, the as-built LPBF Ti6Al4V ELI exhibits a worse corrosion resistance in fluoride-containing chloride solution. For the LPBF Ti6Al4V ELI, the micro-galvanic potentials between the widmanstätten α and β phases (about 35 mV) encourage the formation of a thicker passive film with more titanium oxides and less cation vacancy than that in the as-built counterparts. Consequently, the as-built LPBF Ti6Al4V shows a rapid metallic dissolution rate and a high sensitivity to localized corrosion in the fluoride-contained environment with a less-protective oxide film. The underlying mechanisms for the heat treatment effects on the degradation behavior of pore-free LPBF Ti6Al4V ELI in fluoride-containing chloride solution are proposed.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
2. Metal additive manufacturing: a review of mechanical properties10.1146/annurev-matsci-070115-032024 ↗
3. Fatigue improvement of electron beam melting-fabricated biomedical Co–Cr–Mo alloy by accessible heat treatment10.1080/21663831.2017.1396506 ↗
4. Microstructure and mechanical properties of nickel-based superalloy fabricated by laser powder-bed fusion using recycled powders10.1007/s12613-020-2147-4 ↗
5. Heterogeneous microstructures and corrosion resistance of biomedical Co-Cr-Mo alloy fabricated by electron beam melting (EBM)
6. About metastable cellular structure in additively manufactured austenitic stainless steels
7. On microstructural homogenization and mechanical properties optimization of biomedical Co-Cr-Mo alloy additively manufactured by using electron beam melting
8. Network-strengthened Ti-6Al-4V/(TiC+TiB) composites: powder metallurgy processing and enhanced tensile properties at elevated temperatures10.1007/s11661-019-05244-7 ↗
9. In-situ investigation of plasticity in a Ti-Al-V-Fe (α+β) alloy: slip mechanisms, strain localization, and partitioning10.1016/j.ijplas.2021.103131 ↗
10. Slip-twinning interdependent activation across phase boundaries: an in-situ investigation of a Ti-Al-V-Fe (α+β) alloy10.1016/j.actamat.2020.116520 ↗
11. Additive manufacturing of Ti6Al4V alloy: a review10.1016/j.matdes.2018.107552 ↗
12. Additive manufacturing of titanium alloys by electron beam melting: a review10.1002/adem.201700842 ↗
13. Review on manufacture by selective laser melting and properties of titanium based materials for biomedical applications10.1179/1753555715Y.0000000076 ↗
14. Machinability of titanium alloys (Ti6Al4V and Ti555.3)10.1016/j.jmatprotec.2008.06.020 ↗
15. Current advances in enhancement of wear and corrosion resistance of titanium alloys - a review10.1080/10667857.2016.1212780 ↗
16. Corrosion of metallic materials fabricated by selective laser melting
17. Materials science: share corrosion data10.1038/527441a ↗
18. Heat treatment degrading the corrosion resistance of selective laser melted Ti-6Al-4V alloy10.1149/2.1481707jes ↗
19. Effect of annealing treatments on the microstructure, mechanical properties and corrosion behavior of direct metal laser sintered Ti-6Al-4V10.1007/s11665-017-2710-y ↗
20. Corrosion behavior of additive manufactured Ti-6Al-4V alloy in NaCl solution10.1007/s11661-017-4087-9 ↗
21. A review of corrosion of titanium grade 7 and other titanium alloys in nuclear waste repository environments10.5006/1.3280899 ↗
22. Corrosion properties of powder bed fusion additively manufactured 17-4 PH stainless steel10.5006/2365 ↗
23. Path planning strategies to optimize accuracy, quality, build time and material use in additive manufacturing: a review10.3390/mi11070633 ↗
24. Process parameters optimization for improving surface quality and manufacturing accuracy of binder jetting additive manufacturing process10.1108/RPJ-11-2014-0149 ↗
25. Effect of fluoride ions on corrosion behaviour of commercial pure titanium in artificial seawater environment10.1016/j.apsusc.2019.144759 ↗
26. The corrosion behavior of Ti6Al4V fabricated by selective laser melting in the artificial saliva with different fluoride concentrations and pH values10.1016/j.corsci.2020.109097 ↗
27. Influence of fluoride ion on the electrochemical behaviour of β-Ti alloy for dental implant application10.1016/j.corsci.2010.01.008 ↗
28. Phase separation in Ti-6Al-4V alloys with boron additions for biomedical applications: scanning kelvin probe force microscopy investigation of microgalvanic couples and corrosion initiation10.1007/s11837-017-2378-7 ↗
29. Heat treatment effects on the hydrogen embrittlement of Ti6Al4V fabricated by laser beam powder bed fusion
30. Validation of corrosion rates measured by the Tafel extrapolation method10.1016/j.corsci.2005.05.046 ↗
31. Increasing of the corrosion resistance of the Ti6Al4V alloy by high thickness anodic oxidation10.1007/BF00701236 ↗
32. Insight into the mechanism of alloying elements (Sn, Be) effect on copper corrosion during long-term degradation in harsh marine environment10.1016/j.apsusc.2018.06.029 ↗
33. Influence of temperature on the electrochemical and passivation behavior of 2507 super duplex stainless steel in simulated desulfurized flue gas condensates10.1016/j.corsci.2017.01.016 ↗
34. Enhancing the surface integrity and corrosion resistance of Ti-6Al-4V titanium alloy through cryogenic burnishing10.1007/s00170-016-9000-y ↗
35. Semiconductive properties of titanium anodic oxide films in McIlvaine buffer solution10.1016/j.corsci.2005.10.013 ↗
36. The history of the Point Defect Model for the passive state: a brief review of film growth aspects10.1016/j.electacta.2010.11.005 ↗
37. Passivity - the key to our metals-based civilization10.1351/pac199971060951 ↗
38. Electrochemical investigation and ab initio computation of passive film properties on copper in anaerobic sulphide solutions10.1016/j.corsci.2016.12.010 ↗
39. The passivity of selective laser melted 316L stainless steel10.1016/j.apsusc.2019.144495 ↗
40. The passivity of Type 316L stainless steel in borate buffer solution10.1016/j.jnucmat.2008.06.014 ↗
41. Passivity of 316L stainless steel in borate buffer solution studied by Mott-Schottky analysis, atomic absorption spectrometry and X-ray photoelectron spectroscopy10.1016/j.corsci.2010.07.013 ↗
42. Passive film on 2205 duplex stainless steel studied by photo-electrochemistry and ARXPS methods10.1016/j.corsci.2018.10.020 ↗
43. Passivation and electrochemical behavior of 316L stainless steel in chlorinated simulated concrete pore solution10.1016/j.apsusc.2016.12.180 ↗
44. Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L10.1016/j.actamat.2020.07.063 ↗
45. Heat treatment effects on the metastable microstructure, mechanical property and corrosion behavior of Al-added CoCrFeMnNi alloys fabricated by laser powder bed fusion10.1016/j.jmst.2022.08.018 ↗
46. Electrochemical behaviour of high nitrogen stainless steel in acidic solutions10.1016/j.corsci.2009.02.026 ↗
47. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
48. The passive oxide films growth on 316L stainless steel in borate buffer solution measured by real-time spectroscopic ellipsometry10.1016/j.apsusc.2015.05.165 ↗
49. Comparison of the corrosion behavior of pure titanium and its alloys in fluoride-containing sulfuric acid10.1016/j.corsci.2015.11.003 ↗
50. Influence of fluoride content on the barrier layer formation and titanium dissolution in ethylene glycol-water electrolytes10.1016/j.electacta.2012.05.093 ↗
51. Study of the corrosion behavior of titanium and some of its alloys for biomedical and dental implant applications10.1016/S0022-0728(99)00260-0 ↗
52. Submicron lamellar porous structure formed by selective dissolution of Ti-Al alloy10.1016/j.matdes.2016.02.096 ↗
53. Mechanism of stress relaxation and phase transformation in additively manufactured Ti-6Al-4V via in situ high temperature XRD and TEM analyses10.1016/j.actamat.2020.02.056 ↗
54. The anisotropic corrosion behaviour of wire arc additive manufactured Ti-6A1–4 V alloy in 3.5% NaCl solution10.1016/j.corsci.2018.03.047 ↗
55. Distinction in corrosion resistance of selective laser melted Ti-6Al-4V alloy on different planes10.1016/j.corsci.2016.06.009 ↗
56. The corrosion behavior of Ti6Al4V fabricated by selective laser melting in the artificial saliva with different fluoride concentrations and pH values10.1016/j.corsci.2020.109097 ↗
57. Different corrosion behaviors between alpha and beta phases of Ti6Al4V in fluoride-containing solutions: Influence of alloying element Al10.1016/j.corsci.2020.108605 ↗
58. Effects of applied potential on stable pitting of 304 stainless steel10.1016/j.corsci.2015.01.034 ↗