Characteristics of (Mo-Ta-W)-C and (Nb-Ta-W)-C refractory multi-principal element carbide thin films by non-reactive direct current magnetron co-sputtering
Source abstract
Abstract
The (Mo-Ta-W)-C and (Nb-Ta-W)-C carbide thin films were prepared by non-reactive magnetron co-sputtering. The (Mo-Ta-W)-C thin films exhibited the simple BCC structure with the strip-like surface morphologies and a double-layer structure for cross sections with a columnar upper layer and an featureless lower layer. In the (Mo-Ta-W)-C thin films, the metal-metal and metal-oxygen bonds were observed with no metal-carbon bonds. The carbon-carbon bonds were observed, indicating free carbon phases existed in the (Mo-Ta-W)-C thin films. The surface roughness of (Mo-Ta-W)-C thin films was small with R a value of 3.11–3.74 nm. The hardness of (Mo-Ta-W)-C thin films was 32.6–33.5 GPa. The (Nb-Ta-W)-C thin films formed the amorphous structure. Different from (Mo-Ta-W)-C thin films, the metal-carbon bonds existed in the (Nb-Ta-W)-C thin films, except the metal-metal and metal-oxygen bonds. The C-C bonds were also observed, indicating free carbon phases existed in the (Nb-Ta-W)-C thin films. The surfaces of (Nb-Ta-W)-C thin films displayed a granular structure with Ra of 0.86–1.00 nm, and the cross sections exhibited a fine fibrous structure. The hardness values of (Nb-Ta-W)-C thin films ranged from 34.5 to 36.1 GPa with elastic modulus of 319.6–349.5 GPa. The corrosion current density and polarization resistance of (Nb-Ta-W)-C thin films were better than 304 stainless steel, indicating good anti-corrosive performance of (Nb-Ta-W)-C thin films. The (Nb 23Ta 21W 23)C 33 thin film had low reflectivity in the visible light band (300–800 nm), and high reflectivity in the near-infrared band (800–2500 nm), with the solar absorption ratio α s of 0.4577 and the infrared emissivity ε H of 0.178.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. Size effects on the mechanical properties of nanocrystalline NbMoTaW refractory high entropy alloy thin films10.1016/j.ijplas.2017.04.013 ↗
4. Effects of deposition temperature on the nanomechanical properties of refractory high entropy TaNbHfZr films10.1016/j.jallcom.2019.05.121 ↗
5. Microstructural origins of the high mechanical damage tolerance of NbTaMoW refractory high-entropy alloy thin films10.1016/j.matdes.2019.107692 ↗
6. Wettability, electron work function and corrosion behavior of CoCrFeMnNi high entropy alloy films10.1016/j.surfcoat.2020.126222 ↗
7. Irradiation resistance of multicomponent alloys10.1007/s11661-013-1994-2 ↗
8. Nanocrystalline high-entropy alloy (CoCrFeNiAl0.3) thin-film coating by magnetron sputtering10.1016/j.tsf.2017.08.006 ↗
9. Microstructures and properties of (TiCrZrVAl)N high entropy ceramics films by multi-arc ion plating10.1016/j.ceramint.2021.05.198 ↗
10. Influence of the nitrogen content on the structure and properties of MoNbTaVW high entropy alloy thin films10.1016/j.jallcom.2020.156740 ↗
11. Multicomponent TixNbCrAl nitride films deposited by dc and high-power impulse magnetron sputtering10.1016/j.surfcoat.2021.127743 ↗
12. Hard and tough (NbTaMoW)Nx high entropy nitride films with sub-stoichiometric nitrogen10.1016/j.jallcom.2021.161713 ↗
13. Synthesis and characterization of super-hard AlCrTiVZr high-entropy alloy nitride films deposited by HiPIMS10.1016/j.apsusc.2020.146529 ↗
14. Influence of N content on structure and mechanical properties of multi-component Al-Cr-Nb-Y-Zr based thin films by reactive magnetron sputtering10.1016/j.surfcoat.2020.125614 ↗
15. Multi-component (Al,Cr,Nb,Y,Zr)N thin films by reactive magnetron sputter deposition for increased hardness and corrosion resistance10.1016/j.tsf.2019.137685 ↗
16. Effect of nitrogen content on microstructure and corrosion resistance of sputter-deposited multicomponent (TiNbZrTa)Nx films10.1016/j.surfcoat.2020.126485 ↗
17. FeMnNiCoCr-based high entropy alloy coatings: Effect of nitrogen additions on microstructural development, mechanical properties and tribological performance10.1016/j.apsusc.2019.145101 ↗
18. Characteristics of (TiAlCrNbY)C films deposited by reactive magnetron sputtering10.1016/j.surfcoat.2009.10.049 ↗
19. Characterization of multi-principal-element (TiZrNbHfTa)N and (TiZrNbHfTa)C coatings for biomedical applications10.1016/j.jmbbm.2012.02.020 ↗
20. Deposition and characterization of multi-principal-element (CuSiTiYZr)C coatings10.1016/j.apsusc.2013.07.152 ↗
21. Effects of substrate temperature and carbon content on the structure and properties of (CrCuNbTiY)C multicomponent coatings10.1016/j.surfcoat.2014.07.044 ↗
22. Synthesis and characterization of multicomponent (CrNbTaTiW)C films for increased hardness and corrosion resistance10.1016/j.matdes.2018.03.068 ↗
23. Insight into the structure and tribological and corrosion performance of high entropy (CrNbSiTiZr)C films: First-principles and experimental study10.1016/j.surfcoat.2021.127468 ↗
24. M. View, Handbook of Monochromatic XPS Spectra, 2004.
25. XPS study of the surface composition modification of nc-TiC/C nanocomposite films under in situ argon ion bombardment10.1016/j.tsf.2011.01.200 ↗
26. Deposition and characterization of nanostructured metal/carbon composite films10.1016/j.surfcoat.2003.10.077 ↗
27. Tribological and mechanical properties of nanocrystalline-TiC/a-C nanocomposite thin films10.1116/1.3294717 ↗
28. Microstructure and mechanical properties of Mo-Ta-W refractory multi-principal element alloy thin films for hard protective coatings10.1016/j.surfcoat.2021.128005 ↗
29. Microstructure, mechanical properties and corrosion resistance of high-level hard Nb-Ta-W and Nb-Ta-W-Hf multi-principal element alloy thin films10.1016/j.jallcom.2022.166000 ↗
30. Effects of CH4 flow ratio on the structure and properties of reactively sputtered (CrNbSiTiZr)Cx coatings10.1016/j.matchemphys.2017.08.002 ↗
31. Effects of nitrogen content on microstructures and mechanical properties of (AlCrTiZrHf)N high-entropy alloy nitride films
32. Enhancing corrosion resistance, hardness, and crack resistance in magnetron sputtered high entropy CoCrFeMnNi coatings by adding carbon10.1016/j.matdes.2021.109711 ↗
33. Influence of deposition temperature and amorphous carbon on microstructure and oxidation resistance of magnetron sputtered nanocomposite CrC films10.1016/j.apsusc.2014.03.014 ↗
34. Structure and bonding in amorphous iron carbide thin films10.1088/0953-8984/27/4/045002 ↗
35. Transition metal carbides (WC, Mo2C, TaC, NbC) as potential electrocatalysts for the hydrogen evolution reaction (HER) at medium temperatures10.1016/j.ijhydene.2014.12.076 ↗
36. Solid-solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗
37. High strength bulk amorphous alloys with low critical cooling rates (Overview)10.2320/matertrans1989.36.866 ↗
38. Microstructures and properties of high-entropy alloy films and coatings: a review10.1080/21663831.2018.1434248 ↗
39. In vitro biocompatibility of Si alloyed multi-principal element carbide coatings10.1371/journal.pone.0161151 ↗
40. A study on the quantitative determination of through-coating porosity in PVD-grown coatings10.1016/j.apsusc.2004.03.213 ↗
41. Microstructure, mechanical properties and corrosion performance of Fe44Cr15Mo14Co7C10B5Si5 thin film metallic glass deposited by DC magnetron sputtering10.1016/j.jnoncrysol.2019.119718 ↗