journal article·2023-02

Effects of processing routes on recrystallization texture development and magnetic properties of 0.10 mm ultrathin non-oriented electrical steel sheets for high-frequency application

Zhi-Hong Li, Guo-Dong Wang, Hai-Tao Liu

Publisher page

Abstract

Fabricating ultrathin non-oriented electrical steels (NOES) sheets has been a challenge because the severe plastic deformation inevitably results in undesirable texture such as intensive γ-fiber (<111>//ND). In the present work, both one-stage rolling route with severe plastic deformation and two-stage rolling route combining different rolling process and the intermediate annealing were used to prepare 0.10 mm-thick 3.1Si-0.8Al NOES. A rare phenomenon was found that severe plastic deformation in one-stage rolling route split the orientations of α (<110>//RD) grains through deformation banding and caused lattice curvature, exhibiting the similar microstructure characteristic and stored energy distribution as the deformed γ-grains. As a result, dominant α*-fiber ({1 1 h} <1 2 1/h>) and relatively soft α-fiber textures besides sharp γ-fiber recrystallization texture were formed, which seriously deteriorated the magnetic induction and led to high magnetic anisotropy. By comparison, the two-stage rolling route favored the development of shear bands and increased the final grain size. As the second rolling reduction decreased, detrimental γ- and α*‐fiber recrystallization textures were significantly weakened, whereas λ-fiber (<001>//ND) and {117}<291> recrystallization textures were enhanced. Besides, the final grain size was gradually increased. Therefore, the magnetic induction was continuously improved and the core loss was gradually decreased. Another new finding was that magnetic anisotropy was simultaneously improved as a result of the occurrence of {117}<291> texture and the weakening of α*-fiber texture. The recrystallization mechanism of specific texture components was investigated in detail.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties and Applications · Magnetic properties of thin films · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. M. Tietz, F. Herget, G. von Pfingsten, S. Steentjes, K. Telger, K. Hameyer, Effects and advantages of high-strength non grain oriented (NGO) electrical steel for traction drives, in: 2013 3rd International Electric Drives Production Conference (2013) 1–6.10.1109/EDPC.2013.6689721 ↗
2. Technical problems for core loss reduction of high-speed motor10.4028/www.scientific.net/MSF.915.3 ↗
3. Effect of frequency on the iron losses of 0.5% and 1.5% Si nonoriented electrical steels10.1109/TMAG.2006.879897 ↗
4. High-permeability and thin-gauge non-oriented electrical steel through twin-roll strip casting10.1016/j.matdes.2017.09.051 ↗
5. M. Enokizono, Necessary condition for development of high efficiency, high density and high-speed motor, in: 2019 IEEE Workshop on Electrical Machines Design, Control and Diagnosis, 1 (2019) 89–64.10.1109/WEMDCD.2019.8887835 ↗
6. How non-conventional machining affects the surface integrity and magnetic properties of non-oriented electrical steel10.1016/j.matdes.2021.110051 ↗
7. Effects of Sn addition on core loss and texture of non-oriented electrical steels10.1016/S1006-706X(10)60033-7 ↗
8. Texture and magnetic properties improvement of a 3% Si non-oriented electrical steel by Sb addition10.1016/j.jmmm.2012.11.009 ↗
9. The effect of copper precipitates on the recrystallization textures and magnetic properties of non-oriented electrical steels10.1016/j.jallcom.2013.11.010 ↗
10. Dependence of recrystallization behavior and magnetic properties on grain size prior to cold rolling in high silicon non-oriented electrical steel10.1016/j.jallcom.2021.161576 ↗
11. Effect of hot band grain size on development of textures and magnetic properties in 2.0% Si non-oriented electrical steel sheet10.1016/j.jmmm.2015.08.010 ↗
12. A quasi in-situ EBSD study of the nucleation and growth of Goss grains during primary and secondary recrystallization of a strip-cast Fe-6.5 wt% Si alloy10.1016/j.jallcom.2020.158550 ↗
13. Non-oriented electrical steel with core losses comparable to grain-oriented electrical steel10.1016/j.jmmm.2019.165597 ↗
14. Texture control during the manufacturing of nonoriented electrical steels10.1155/2008/173083 ↗
15. Ultrathin-gauge high silicon non-oriented electrical steel with high permeability and low core loss fabricated by optimized two-stage cold rolling method
16. Strain-induced grain boundary migration in {112}<111>/{100}<001>and {123}<634>/{100}<001>aluminum bicrystals10.1016/j.msea.2011.08.020 ↗
17. Bunge · 1982
18. S. Suwas, R.K. Ray, Representation of texture (2014) 11–38.10.1007/978-1-4471-6314-5_2 ↗
19. Overview on basic types of hot rolling textures of steels10.1002/srin.200300194 ↗
20. Strong {100}<012>-{411}<148>recrystallization textures in heavily hot-rolled non-oriented electrical steels10.1016/j.matlet.2019.126844 ↗
21. On {h,1,1}<1/h,1,2>, the recrystallisation texture of heavily cold rolled BCC steel10.4028/www.scientific.net/MSF.467-470.269 ↗
22. Evolution of cube texture in strip-cast non-oriented silicon steels10.1016/j.scriptamat.2014.05.019 ↗
23. Strong cube recrystallization texture in silicon steel by twin-roll casting process10.1016/j.actamat.2014.05.020 ↗
24. The evolution of cube ({001}<100>) texture in non-oriented electrical steel10.1016/j.actamat.2019.12.024 ↗
25. Effect of annealing temperature on magnetic properties of cold rolled high silicon steel thin sheet10.1016/j.jallcom.2009.10.118 ↗
26. Deformation banding and recrystallization of α fibre components in heavily rolled IF steel10.1016/j.actamat.2004.05.017 ↗
27. Texture evolution during recrystallization and grain growth in heavily cold-rolled Fe-3%Si alloy10.2355/isijinternational.ISIJINT-2018-268 ↗
28. Occurrence of shear bands in rotated Goss ({110}<110>) orientations of metals with bcc crystal structure10.1016/j.scriptamat.2012.08.017 ↗
29. Dillamore · Met. Sci. · 1979 · 13 · 7310.1179/msc.1979.13.2.73 ↗
30. Influence of grain size and texture prior to warm rolling on microstructure, texture and magnetic properties of Fe-6.5 wt% Si steel10.1016/j.jmmm.2018.01.036 ↗
31. Electron microscope observations on the annealing processes occurring in cold-worked silver10.1080/14786436008241221 ↗
32. On the theory of normal and abnormal grain growth10.1016/0001-6160(65)90200-2 ↗
33. Disparity in recrystallization of α- & γ-fibers and its impact on Cube texture formation in non-oriented electrical steel10.1016/j.actamat.2021.117141 ↗
34. Effects of initial microstructure and texture on microstructure, texture evolution and magnetic properties of non-oriented electrical steel10.1016/j.jmmm.2016.01.018 ↗
35. Advances in the production of high-silicon electrical steel by thermomechanical processing and by immersion and diffusion annealing10.1016/j.jallcom.2003.09.070 ↗
36. Fabrication of high permeability non-oriented electrical steels by increasing<001>recrystallization texture using compacted strip casting processes10.1016/j.jmmm.2014.08.052 ↗
37. Texture evolution in twin-roll strip cast non-oriented electrical steel with strong Cube and Goss texture10.1016/j.actamat.2020.08.048 ↗
38. Anisotropy of power losses in textured soft magnetic materials10.1063/1.363764 ↗
39. S.K. Chang, Magnetic anisotropies and textures in high-alloyed non-oriented electrical steels, ISIJ Int. 47 (3) 466–471.10.2355/isijinternational.47.466 ↗
40. Texture evolution in experimental grades of high-silicon electrical steel10.1016/j.physb.2006.06.019 ↗