journal article·2023-02

Simultaneous strengthening effect of local chemical ordering and twin boundary on the medium entropy alloy CoCrNi

Yongzhi Xi, Xiaofeng Yang, Xunlu Yin, Xinxin Liu, Xiancheng Zhang, Hao Chen

Publisher page

Abstract

The interactive strengthening effect of twin boundary and local chemical ordering (LCO) structure in CoCrNi medium-entropy alloy (MEA) was investigated using molecular dynamics (MD) simulations of nanoindentation. The correlation between the two strengthening effects and the hardness was characterized. Meanwhile, underlying strengthening mechanisms were revealed. Results demonstrate that both LCO and twin boundary enhance the hardness of CoCrNi MEA. A concurrent strengthening effect appears when LCO and twin boundary are coupled for CoCrNi MEA with a stronger improvement on the hardness (12.40% at 70 K, 23.23% at 300 K, and 31.79% at 700 K). By comparing the plastic zones underneath the indentation, it is discovered that both LCO and twin boundary inhibit dislocation extension. The twin boundary provides a horizontal slipping path for dislocations. Moreover, since dislocations are pinned by Ni LCO structure on the twin plane, LCO can significantly limit the horizontal slip of dislocations on the twin plane.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. High entropy alloys: key issues under passionate debate10.1016/j.scriptamat.2020.07.010 ↗
2. Composite of medium entropy alloys synthesized using spark plasma sintering10.1016/j.scriptamat.2020.09.015 ↗
3. Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys10.1016/j.pmatsci.2018.12.003 ↗
4. Effects of cryogenic temperature and grain size on fatigue-crack propagation in the medium-entropy crconi alloy10.1016/j.actamat.2020.09.021 ↗
5. Influence of deformation induced nanoscale twinning and fcc-hcp transformation on hardening and texture development in medium-entropy crconi alloy10.1016/j.actamat.2018.07.028 ↗
6. Electrical and thermal transport properties of medium-entropy siygeysnx alloys10.1016/j.actamat.2020.08.053 ↗
7. Achieving exceptional wear resistance in a compositionally complex alloy via tuning the interfacial structure and chemistry10.1016/j.actamat.2020.02.039 ↗
8. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
9. Recovery, recrystallization, grain growth and phase stability of a family of fcc-structured multi-component equiatomic solid solution alloys10.1016/j.intermet.2013.10.024 ↗
10. Exceptional damage-tolerance of a medium-entropy alloy crconi at cryogenic temperatures10.1038/ncomms10602 ↗
11. Dislocation mechanisms and 3d twin architectures generate exceptional strength-ductility-toughness combination in crconi medium-entropy alloy10.1038/ncomms14390 ↗
12. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
13. Shape-preserving machining produces gradient nanolaminate medium entropy alloys with high strain hardening capability10.1016/j.actamat.2019.03.024 ↗
14. Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes10.1038/s41586-018-0685-y ↗
15. Short-range order and its impact on the crconi medium-entropy alloy
16. Insights into the phase diagram of the crmnfeconi high entropy alloy10.1016/j.actamat.2015.01.068 ↗
17. Direct observation of chemical short-range order in a medium-entropy alloy10.1038/s41586-021-03428-z ↗
18. Tuning element distribution, structure and properties by composition in high-entropy alloys10.1038/s41586-019-1617-1 ↗
19. Strengthening in multi-principal element alloys with local-chemical-order roughened dislocation pathways10.1038/s41467-019-11464-7 ↗
20. Tunable stacking fault energies by tailoring local chemical order in crconi medium-entropy alloys10.1073/pnas.1808660115 ↗
21. The influences of temperature and microstructure on the tensile properties of a cocrfemnni high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
22. Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized vcrmnfeconi high-entropy alloy10.1038/ncomms15719 ↗
23. Molecular dynamics simulation of bcc ta with coherent twin boundaries under nanoindentation10.1016/j.msea.2017.06.048 ↗
24. Grain size effect on the hardness of nanocrystal measured by the nanosize indenter10.1016/j.apsusc.2013.04.062 ↗
25. Effects of high entropy and twin boundary on the nanoindentation of cocrnifemn high-entropy alloy: A molecular dynamics study10.1016/j.commatsci.2021.110495 ↗
26. Molecular dynamics simulation of nanoindentation on cu/ni nanotwinned multilayer films using a spherical indenter10.1038/srep35665 ↗
27. Nanoindentation behavior of high entropy alloys with transformation-induced plasticity10.1038/s41598-019-43174-x ↗
28. Chemical short range order strengthening in a model fcc high entropy alloy10.1016/j.actamat.2020.02.041 ↗
29. Equation of state calculations by fast computing machines
30. Atomsk: A tool for manipulating and converting atomic data files10.1016/j.cpc.2015.07.012 ↗
31. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
32. Effects of lattice distortion and chemical short-range order on the mechanisms of deformation in medium entropy alloy cocrni10.1016/j.actamat.2020.08.044 ↗
33. Novel atomic-scale mechanism of incipient plasticity in a chemically complex crconi medium-entropy alloy associated with inhomogeneity in local chemical environment10.1016/j.actamat.2020.05.042 ↗
34. Dislocation structures below a nano-indent of the cocrni medium-entropy alloy
35. Chemical short-range order strengthening mechanism in cocrni medium-entropy alloy under nanoindentation10.1016/j.scriptamat.2021.114364 ↗
36. Effects of local elemental ordering on defect-grain boundary interactions in high-entropy alloys10.1016/j.jallcom.2021.161314 ↗
37. Grain boundary energy effect on grain boundary segregation in an equiatomic high-entropy alloy
38. A unified formulation of the constant temperature molecular dynamics methods10.1063/1.447334 ↗
39. Mechanical degradation due to vacancies produced by grain boundary corrosion of steel10.1016/j.actamat.2020.08.080 ↗
40. Visualization and analysis of atomistic simulation data with ovito-the open visualization tool10.1088/0965-0393/18/1/015012 ↗
41. Extracting dislocations and non-dislocation crystal defects from atomistic simulation data10.1088/0965-0393/18/8/085001 ↗
42. Automated identification and indexing of dislocations in crystal interfaces10.1088/0965-0393/20/8/085007 ↗
43. Chemical short-range ordering regulated dislocation cross slip in high-entropy alloys10.1016/j.jallcom.2022.165144 ↗
44. Atomistic insights into the deformation mechanism of a cocrni medium entropy alloy under nanoindentation10.1016/j.ijplas.2021.102997 ↗
45. Incipient plasticity and dislocation nucleation of fecocrnimn high-entropy alloy10.1016/j.actamat.2013.01.059 ↗
46. Activation volume and energy for dislocation nucleation in multi-principal element alloys10.3390/met9020263 ↗
47. Tailoring mechanical properties of a cocrni medium-entropy alloy by controlling nanotwin-hcp lamellae and annealing twins10.1016/j.msea.2018.11.143 ↗
48. Heavily twinned cocrni medium-entropy alloy with superior strength and crack resistance10.1016/j.msea.2020.139591 ↗
49. Unusual dislocation behavior in high-entropy alloys10.1016/j.scriptamat.2020.02.021 ↗
50. Plastic anisotropy and associated deformation mechanisms in nanotwinned metals10.1016/j.actamat.2012.09.052 ↗
51. Molecular dynamics simulation of effects of twin interfaces on cu/ni multilayers10.1016/j.msea.2016.01.055 ↗