journal article·2023-02

Cocklebur-like ZnSe-VO2@rGO nanostructures as host to boost the performance of lithium-sulfur batteries

Chenyuan Zhao, Yuxiang Zhou, Tianyu Shi, Haihong Yin, Changqing Song, Lin Qin, Zhiliang Wang, Haibao Shao, Ke Yu

Publisher page

Abstract

Although lithium sulfur batteries (LSBs) have high theoretical capacity and energy density, low conductivity of sulfur and the discharge species (Li 2S 2, Li 2 S), the polysulfide shuttle and the large volume change hinder the commercialization of LSBs. To tackle the problem, we hydrothermally prepared a special cocklebur-like ZnSe-VO 2 @rGO nanostructure, in which graphene oxide (GO) is active in inducing thorn-like VO 2 nanorods grown on carambola-like VO 2 nanostructures. In this structure, the polar VO 2 and ZnSe quantum dots (QDs) have strong chemical adsorption that can catalyze the polysulfide conversion and alleviate the shuttle effect; besides, the thorn-like VO 2 nanorods act like numerous tentacles that capture polysulfides by increasing the contact area, and the reduced graphene oxide (rGO) nanosheets not only buffer the volume change, but also enhance the conductivity of the framework and improve the ion and electron transfer. Boosted by the synergetic effects of VO 2 , rGO and ZnSe QDs, the ZnSe-VO 2@rGO/S cathode achieves a high specific capacity of 1026.1 mA h g −1 at 0.2 C and 712.3 mA h g −1 at 2 C. Good cyclic stability was obtained as well, with a high reversible capacity of 820 mA h g −1 and high retention of 89.1 % after cycling at 0.5 C for 150 cycles. Such outstanding performance indicated its good potential for use in advanced LSBs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advanced battery technologies research · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Review of multifunctional separators: stabilizing the cathode and the anode for alkali (Li, Na, and K) metal-sulfur and selenium batteries10.1021/acs.chemrev.1c00838 ↗
2. Recent advances and strategies toward polysulfides shuttle inhibition for high-performance Li-S batteries10.1002/advs.202106004 ↗
3. Electrochemical kinetic modulators in lithium-sulfur batteries: from defect-rich catalysts to single atomic catalysts10.1002/eem2.12250 ↗
4. Nanotechnology for sulfur cathodes10.1021/acsnano.1c01999 ↗
5. Advances in the development of single-atom catalysts for high-energy-density lithium-sulfur batteries10.1002/adma.202200102 ↗
6. Guanine-assisted N-doped ordered mesoporous carbons as efficient capacity decaying suppression materials for lithium-sulfur batteries10.1016/j.jmst.2021.06.016 ↗
7. Free-standing 3D nitrogen-doped graphene/Co4N aerogels with ultrahigh sulfur loading for high volumetric energy density Li-S batteries10.1016/j.jallcom.2022.163625 ↗
8. Anchoring Mo2C nanoparticles on vertical graphene nanosheets as a highly efficient catalytic interlayer for Li-S batteries10.1016/j.cej.2021.134306 ↗
9. Catalytic cobalt phosphide Co2P/carbon nanotube nanocomposite as host material for high performance lithium-sulfur battery cathode10.1016/j.jallcom.2020.156289 ↗
10. Implanting single Zn atoms coupled with metallic co nanoparticles into porous carbon nanosheets grafted with carbon nanotubes for high-performance lithium-sulfur batteries10.1002/adfm.202200424 ↗
11. Cobalt oxyhydroxide decorating hollow carbon sphere: a high-efficiency multi-functional material for Li-S batteries and alkaline electrocatalysis10.1016/j.cej.2022.135790 ↗
12. Constructing a multifunctional mesoporous composite of metallic cobalt nanoparticles and nitrogen-doped reduced graphene oxides for high-performance lithium-sulfur batteries10.1002/cey2.168 ↗
13. Notes in accordions-organized MXene equipped with CeO2 for synergistically adsorbing and catalyzing polysulfides for high-performance lithium-sulfur batteries10.1016/j.jechem.2022.02.046 ↗
14. Hollow carbon nanospheres coated by delta-MnO2 as S host to enhance the catalytic conversion of polysulfides in Li-S batteries10.1016/j.apsusc.2022.152498 ↗
15. Phosphorus-doped metal-organic framework-derived CoS2 nanoboxes with improved adsorption-catalysis effect for Li-S batteries10.1021/acsami.1c00494 ↗
16. Regulating the d band in WS2@NC hierarchical nanospheres for efficient lithium polysulfide conversion in lithium-sulfur batteries10.1016/j.jechem.2020.08.011 ↗
17. Embedding cobalt atom clusters in CNT-wired MoS2 tube-in-tube nanostructures with enhanced sulfur immobilization and catalyzation for Li-S batteries10.1002/smll.202102710 ↗
18. Coupling highly dispersed Sb2S3 nanodots with nitrogen/sulfur dual-doped porous carbon nanosheets for efficient immobilization and catalysis of polysulfides conversion10.1016/j.cej.2020.127688 ↗
19. Building flexibly porous conductive skeleton inlaid with surface oxygen-dominated MXene as an amphiphilic nanoreactor for stable Li-S pouch batteries10.1016/j.ensm.2022.02.006 ↗
20. N-doped carbon-embedded TiN nanowires as a multifunctional separator for Li-S batteries with enhanced rate capability and cycle stability10.1016/j.jechem.2020.08.050 ↗
21. Conductive Fe2N/N-rGO composite boosts electrochemical redox reactions in wide temperature accommodating lithium-sulfur batteries
22. Facile synthesis of Fe3C nano-particles/porous biochar cathode materials for lithium sulfur battery10.1016/j.jallcom.2020.157024 ↗
23. Lithium-sulfur battery cathode design: tailoring metal-based nanostructures for robust polysulfide adsorption and catalytic conversion10.1002/adma.202008654 ↗
24. Propelling the polysulfide phase transformation of lithium-sulfur battery by VO2-rGO10.1016/j.jallcom.2019.06.232 ↗
25. V2C/VO2 nanoribbon intertwined nanosheet dual heterostructure for highly flexible and robust lithium-sulfur batteries10.1039/D1TA05693J ↗
26. VO2 nanostructures for batteries and supercapacitors: a review10.1002/smll.202006651 ↗
27. Nitrogen-doped sheet VO2 modified separator to enhanced long-cycle performance lithium-sulfur battery10.1016/j.jpowsour.2021.230040 ↗
28. Vanadium dioxide plates reduced graphene oxide as sulfur cathodes for efficient polysulfides trap in long-life lithium-sulfur batteries10.1016/j.jcis.2022.09.028 ↗
29. Anion-doped cobalt selenide with porous architecture for high-rate and flexible lithium-sulfur batteries10.1002/smtd.202100649 ↗
30. Identifying the evolution of selenium-vacancy-modulated MoSe2 precatalyst in lithium-sulfur chemistry10.1002/anie.202109291 ↗
31. ZnSe/N-doped carbon nanoreactor with multiple adsorption sites for stable lithium-sulfur batteries10.1021/acsnano.0c06112 ↗
32. A special core-shell ZnS-CNTs/S@NH cathode constructed to elevate electrochemical performances of lithium-sulfur batteries10.1016/j.jcis.2021.04.063 ↗
33. Carambola-shaped VO2 nanostructures: a binder-free air electrode for an aqueous Na-air battery10.1039/C6TA09375B ↗
34. Synthesis of photoactivated highly fluorescent Mn2+-doped ZnSe quantum dots as effective lead sensor in drinking water10.1016/j.materresbull.2020.111121 ↗
35. Synthesis of nanostructured hollow microspheres of vanadium (III, V) oxides10.17586/2220-8054-2020-11-5-572-577 ↗
36. Graphene oxide sheets-induced growth of nanostructured Fe3O4 for high-performance anode material of lithium ion batteries10.1039/C5TA01617G ↗
37. Vanadium dioxide cathodes for high-rate photo-rechargeable zinc-ion batteries
38. N-doped C@ZnSe as a low cost positive electrode for aluminum-ion batteries: better electrochemical performance with high voltage platform of similar to 1.8 V and new reaction mechanism10.1016/j.electacta.2021.137790 ↗
39. Ti3C2Tx/rGO porous composite films with superior electromagnetic interference shielding performances10.1016/j.carbon.2020.12.084 ↗
40. Construction of reduced graphene oxide wrapped yolk-shell vanadium dioxide sphere hybrid host for high-performance lithium-sulfur batteries10.1039/D0DT02275F ↗
41. Graphene/VO2 hybrid material for high performance electrochemical capacitor10.1016/j.electacta.2013.08.158 ↗
42. Electrochemical investigation of thermically treated graphene oxides as electrode materials for vanadium redox flow battery10.1016/j.apenergy.2015.02.073 ↗
43. The precursor compound of two types of ZnSe magic-sized clusters10.1007/s12274-021-3503-z ↗
44. Confining ultrafine ZnSe nanoparticles in N,Se-codoped carbon matrix using a direct solid state reaction approach for boosting sodium storage performance10.1016/j.jallcom.2020.155703 ↗
45. A unique morphology and interface dual-engineering strategy enables the holey C@VO2 cathode with enhanced storage kinetics for aqueous Zn-ion batteries10.1039/D1TA00892G ↗
46. Conductive and catalytic triple-phase interfaces enabling uniform nucleation in high-rate lithium-sulfur batteries10.1002/aenm.201802768 ↗
47. Ultrafine Co3Se4 nanoparticles in nitrogen-doped 3D carbon matrix for high-stable and long-cycle-life lithium sulfur batteries10.1002/aenm.201904273 ↗
48. Synchronous immobilization and conversion of polysulfides on a VO2-VN binary host targeting high sulfur load Li-S batteries10.1039/C8EE01402G ↗
49. Terminal sulfur atoms formation via defect engineering strategy to promote the conversion of lithium polysulfides10.1016/j.jmst.2021.06.050 ↗
50. Enabling immobilization and conversion of polysulfides through a nitrogen-doped carbon nanotubes/ultrathin MoS2 nanosheet core-shell architecture for lithium-sulfur batterie10.1039/C9TA03227D ↗
51. Emerging catalysts to promote kinetics of lithium-sulfur batteries10.1002/aenm.202002893 ↗
52. Vanadium dioxide- reduced graphene oxide binary host as an efficient polysulfide plague for highperformance lithium- sulfur batteries10.1039/C8TA10422K ↗
53. Rational construction of a CNTs@VO2 nanosheets modified separator for enhancing the performance of lithium-sulfur batteries10.1039/D2DT00421F ↗
54. The combination of intercalation and conversion reactions to improve the volumetric capacity of the cathode in Li-S batteries10.1039/C8TA11375K ↗
55. Preparation of mesohollow and microporous carbon nanofiber and its application in cathode material for lithium-sulfur batteries10.1016/j.jallcom.2014.04.073 ↗
56. 3D CoS2/rGO aerogel as trapping-catalyst sulfur host to promote polysulfide conversion for stable Li-S batteries10.1016/j.jallcom.2021.159780 ↗
57. Co nanoparticles anchored on the Co-N-x active centers grafted nitrogen-doped graphene with enhanced performance for lithium-sulfur battery10.1016/j.jallcom.2021.161552 ↗
58. Fe, Co-bimetallic doped C3N4 with in-situ derived carbon tube as sulfur host for anchoring and catalyzing polysulfides in lithium-sulfur battery10.1016/j.jallcom.2021.159883 ↗
59. Mg-Al layered double hydroxides modified N-doped porous carbon nanofibers film as cathodic interlayer for high performance Li-S batteries10.1016/j.jallcom.2021.160073 ↗
60. Vanadium dioxide-graphene composite with ultrafast anchoring behavior of polysulfides for lithium-sulfur batteries10.1021/acsami.8b02920 ↗
61. MOFs-derived nitrogen-doped carbon interwoven with carbon nanotubes for high sulfur content lithium-sulfur batteries10.1016/j.apsusc.2019.143773 ↗