journal article·2022-12

Manufacturing an ultra-low-sulfur CoCrFeMnNi high-entropy alloy by slagging through induction melting with ferroalloys feedstock

Shengchao Duan, Jiyeon Kang, Jinhyung Cho, Minjoo Lee, Wangzhong Mu, Joo Hyun Park

Publisher page

Abstract

Commercial ferroalloys are used in the manufacturing of a CoCrFeMnNi high-entropy alloy (HEA) due to their price advantage and the productivity of the manufacturing process. However, elemental impurities such as sulfur in ferroalloys can undermine the mechanical properties of HEAs. Therefore, the desulfurization behavior of a CoCrFeMnNi HEA using the CaO-MgO-Al 2O 3 (CAM) slagging method with alumina or magnesia refractories and ferroalloys raw material feedstock was investigated in an induction melting furnace at 1773 K to determine how to control the cleanness of the HEA. The resulting desulfurization ratios of the alloy were approx. 47% when refined by the CaAl 2O 4-MgAl 2O 4(CA-MA)-saturated slag in an Al 2O 3 refractory, whereas 94% when refined by the CaO-MgO(C-M)-saturated slag in a MgO refractory. The overall mass transfer coefficients of sulfur for the HEA refined by the CA-MA- and C-M-saturated slags at 1773 K were k o = 1.4 × 1 0 − 6 m / s and k o = 2.0 × 1 0 − 6 m / s , respectively, which are lower than the coefficients of iron- and nickel-based alloys at the same experimental conditions. The MnS inclusion particles can precipitate in the mushy zone rather than the liquid region when the solid fraction is close to 1.0, i.e., at the final stage of the solidification. The theoretical radius of MnS increases from 0 to 1.6 µm when the sulfur content rises from 3 ppm to 60 ppm, according to the hypothesis that the mass transfer of sulfur in the HEA is the rate-controlling step.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. High-entropy alloys: a critical review10.1080/21663831.2014.912690 ↗
3. Science and technology in high-entropy alloys10.1007/s40843-017-9195-8 ↗
4. High-entropy alloy: challenges and prospects10.1016/j.mattod.2015.11.026 ↗
5. High-entropy alloys10.1038/s41578-019-0121-4 ↗
6. Fatigue behavior of high-entropy alloys: A review10.1007/s11431-017-9137-4 ↗
7. Tensile properties of high- and medium-entropy alloys10.1016/j.intermet.2013.03.018 ↗
8. High entropy alloys: a focused review of mechanical properties and deformation mechanisms10.1016/j.actamat.2019.12.015 ↗
9. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
10. Corrosion of high entropy alloys10.1038/s41529-017-0009-y ↗
11. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
12. Nanoprecipitate-strengthened high-entropy alloys10.1002/advs.202100870 ↗
13. A Co-free Cr-Fe-Ni-Al-Si high entropy alloy with outstanding corrosion resistance and high hardness fabricated by laser surface melting10.1016/j.matlet.2022.131882 ↗
14. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
15. Effects of transient thermal shock on the microstructures and corrosion properties of a reduced activation high-entropy alloy10.1016/j.jallcom.2022.165762 ↗
16. Hexagonal high-entropy alloys10.1080/21663831.2014.951493 ↗
17. Additive manufacturing of high-strength CrMnFeCoNi-based high entropy alloys with TiC addition10.1016/j.intermet.2019.04.005 ↗
18. Precipitation behavior and its impact on mechanical properties in an aged carbon-containing Al0.3Cu0.5CrFeNi2 high-entropy alloy10.1016/j.matchar.2019.109792 ↗
19. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system10.1016/j.actamat.2013.09.037 ↗
20. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
21. Significant hardening due to the formation of a sigma phase matrix in a high entropy alloy10.1016/j.intermet.2012.09.022 ↗
22. Processing, alloy composition and phase transition effect on the mechanical and corrosion properties of high entropy alloys: A review10.1016/j.jmrt.2016.03.004 ↗
23. Manufacturing methods, microstructural and mechanical properties evolutions of high-entropy alloys: A review10.1007/s12540-019-00565-z ↗
24. R.H. Eric, Chapter 1.10 - Production of Ferroalloys, in: S. Seetharaman (Ed.) Treatise on Process Metallurgy, Elsevier, Boston, 2014, pp. 477–532. https://doi.org/10.1016/B978–0-08–096988-6.00005–5.10.1016/B978-0-08-096988-6.00005-5 ↗
25. https://www.usgs.gov/centers/nmic/minerals-yearbook-metals-and-minerals#F.
26. M.M. Gasik, Chapter 1 - Introduction, in: M. Gasik (Ed.) Handbook of Ferroalloys: Theory and Technology, Butterworth-Heinemann, Oxford, 2013, pp. 3–7. https://doi.org/10.1016/B978–0-08–097753-9.00001–0.10.1016/B978-0-08-097753-9.00001-0 ↗
27. Non-metallic inclusions in different ferroalloys and their effect on the steel quality: A review10.1007/s11663-021-02259-7 ↗
28. Ferroalloy quality and steel cleanliness10.1179/030192310X12700328925787 ↗
29. Effect of LCFeCr alloy additions on the non-metallic inclusion characteristics in Ti-containing ferritic stainless steel10.1007/s11663-021-02296-2 ↗
30. Three-dimensional investigations of inclusions in ferroalloys10.1002/srin.201300157 ↗
31. Inclusions in wrought superalloys: a review10.1007/s42243-021-00617-y ↗
32. Manufacturing of high entropy alloys10.1007/s11837-015-1540-3 ↗
33. Influence of manufacturing conditions on inclusion characteristics and mechanical properties of FeCrNiMnCo alloy10.3390/met10101286 ↗
34. Pitting at inclusions of the equiatomic CoCrFeMnNi alloy and improving corrosion resistance by potentiodynamic polarization in H2SO410.1016/j.corsci.2021.109748 ↗
35. Microstructure and corrosion behavior of FeCrNiCoMnx (x = 1.0, 0.6, 0.3, 0) high entropy alloys in 0.5 M H2SO410.1016/j.corsci.2021.109694 ↗
36. Properties of 713LC compacts, hot isostatically pressed at supersolidus temperatures10.1520/JTE10145J ↗
37. H-phase sulphocarbides and sulphur in nickel-base superalloys10.1179/030716974803288040 ↗
38. Mechanisms of reactive element Y on the purification of K4169 superalloy during vacuum induction melting10.1007/s12613-018-1617-4 ↗
39. Effect of slag composition on the deoxidation and desulfurization of Inconel 718 superalloy by ESR type slag without deoxidizer addition10.1007/s11663-019-01729-3 ↗
40. Investigation of desulfurization of Inconel 718 superalloys by ESR type slags with different TiO2 content10.1016/j.jmrt.2019.01.027 ↗
41. Effect of fluorspar and industrial wastes (red mud and ferromanganese slag) on desulfurization efficiency of molten steel10.1007/s11663-020-01889-7 ↗
42. Effect of silicon on the desulfurization of Al-killed steels: Part I. Mathematical model10.1007/s11663-013-9813-0 ↗
43. Mechanism of yttrium in deep desulfurization of NiCoCrAlY alloy during vacuum induction melting process10.1007/s12598-018-1103-1 ↗
44. Estimation of sulfide capacities of multicomponent slags using optical basicity10.2355/isijinternational.53.761 ↗
45. Effect of slag chemistry on the desulfurization kinetics in secondary refining processes10.1007/s11663-017-0948-2 ↗
46. Desulfurization behavior and mechanism of CaO-saturated slag10.1016/S1006-706X(16)30121-2 ↗
47. Microstructure evolution and mechanical property of directionally solidified CoCrFeMnNi high entropy alloy10.1016/j.intermet.2020.106723 ↗
48. F.D. Richardson, Physical chemistry of melts in metallurgy, Academic Press, New York, 1974.
49. Effect of white mud addition on desulfurization rate of molten steel10.1007/s11663-021-02343-y ↗
50. Sulphide capacities of CaO-Al2O3-MgO and CaO-Al2O3-SiO2 Slags10.2355/isijinternational.33.36 ↗
51. Desulfurization behavior of Incoloy® 825 superalloy by CaO-Al2O3-MgO-TiO2 slag10.1007/s11663-021-02338-9 ↗
52. Deo · 1993
53. Measuring and modelling of density for selected CaO-Al2O3-MgO slags10.17159/2411-9717/2015/v115n8a14 ↗
54. Estimation of the viscosities of binary metallic melts using Gibbs energies of mixing10.1007/BF02650079 ↗
55. Chen · 2010
56. Characterization of non-metallic inclusions and their influence on the mechanical properties of a FCC single-phase high-entropy alloy10.1016/j.jallcom.2018.05.339 ↗
57. Mn–Se interactions at the cathode interface during the electrolytic-manganese process10.1016/j.hydromet.2012.07.006 ↗
58. C. Wagner, Thermodynamics of Alloys, Addison-Wesley Press, Cambridge, MA, 1952.
59. Thermodynamic Data for Steelmaking, The 19th Committee in Steelmaking, The Japan Society for Promotion of Science
60. The thermodynamic behavior of sulfur in molten nickel and nickel-base alloys10.1007/BF02644259 ↗
61. Insights into the phase diagram of the CrMnFeCoNi high entropy alloy10.1016/j.actamat.2015.01.068 ↗
62. Evolution of MnS and MgO·Al2O3 inclusions in AISI M35 steel during electroslag remelting10.1007/s42243-021-00698-9 ↗
63. Gulliver · 1922
64. Bemerkungen zur Schichtkristallbildung10.1515/ijmr-1942-340303 ↗
65. Mathematical model for prediction of composition of inclusions formed during solidification of liquid steel10.2355/isijinternational.49.1819 ↗
66. Extraction, thermodynamic analysis, and precipitation mechanism of mns-tin complex inclusions in low-sulfur steels10.1007/s11661-016-3463-1 ↗
67. Guo · 2013
68. Characteristics of BN precipitation and growth during solidification of BN free-machining steel10.1007/s11663-014-0146-4 ↗
69. Precipitation and growth of MnS inclusion in an austenitic hot-work die steel during ESR solidification process10.1051/metal/2018114 ↗
70. Mechanism of MnS precipitation on Al2O3–SiO2 inclusions in non-oriented silicon steel10.1007/s12540-018-0141-4 ↗
71. Effect of oxide particles on MnS precipitation in low S steels10.2355/tetsutohagane1955.78.11_1697 ↗
72. Effect of S content on the MnS precipitation in steel with oxide nuclei10.2355/isijinternational.36.1014 ↗