Highly N-doped and flexible carbon nanofiber membrane as cathode host for Li-Se batteries
Source abstract
Abstract
Se as an active material attracts tremendous attention because of its high volumetric capacity and better conductivity than S for rechargeable batteries. Herein, a carbon nanofiber membrane (PM-CNF) is designed and prepared as free-standing Se host by electrospinning the solution of polyacrylonitrile (PAN) and poly(styrenesulfonic acid)-melamine salt, followed by carbonization and activation process. PM-CNF shows super flexibility and high N-doping level of 8.92 % (pyrrolic-N: 2.15 % and pyridinic-N: 3.07 %), which is beneficial for ions diffusion and electrons transformation. The free-standing PM-CNF/Se cathode delivers a high reversible capacity of 570 mAh g −1 at 0.5 C, superior rate capacity of 375 mAh g −1 at 8 C, and stabile cycling over 1800 cycles. The excellent electrochemical performance can be ascribed to high Li-ion diffusion coefficient (2.99 × 10 −9 cm 2 s −1) and capacitance-contributed ratio (77.1 % at 0.1 mV s −1). The analysis of the charge/discharge process reveals that no polyselenide intermediates are observed during the first cycling process and thus the inhibited shuttle effect of polyselenides over cycling, which primarily contributes to the long cycling stability.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Pulverizing Fe2O3 nanoparticles for developing Fe3C/N-codoped carbon nanoboxes with multiple polysulfide anchoring and converting activity in Li-S batteries
2. Advances in polar materials for lithium-sulfur batteries
3. Lignin derived hierarchical porous carbon with extremely suppressed polyselenide shuttling for high-capacity and long-cycle-life lithium–selenium batteries10.1016/j.jechem.2020.07.022 ↗
4. Suppressing the shuttle effect and dendrite growth in lithium-sulfur batteries10.1021/acsnano.0c02241 ↗
5. High-performance Li-Se battery enabled via a one-piece cathode design
6. Hierarchically porous carbon from waste coffee grounds for high-performance Li–Se batteries10.1016/j.electacta.2019.134931 ↗
7. Selenium and selenium–sulfur chemistry for rechargeable lithium batteries: interplay of cathode structures, electrolytes, and interfaces10.1021/acsenergylett.6b00642 ↗
8. Two-plateau Li-Se chemistry for high volumetric capacity Se cathodes10.1002/anie.202004424 ↗
9. MOF-derived nitrogen-doped core-shell hierarchical porous carbon confining selenium for advanced lithium-selenium batteries10.1039/C9NR00924H ↗
10. Se/CNTs microspheres as improved performance for cathodes in Li-Se batteries10.1016/j.jallcom.2019.01.348 ↗
11. Polyaniline-coated selenium/carbon composites encapsulated in graphene as efficient cathodes for Li-Se batteries10.1007/s12274-017-1870-2 ↗
12. Dual-confined SeS2 cathode based on polyaniline-assisted double-layered micro/mesoporous carbon spheres for advanced Li–SeS2 battery10.1016/j.jpowsour.2020.227955 ↗
13. Melamine-based polymer networks enabled N, O, S Co-doped defect-rich hierarchically porous carbon nanobelts for stable and long-cycle Li-ion and Li-Se batteries10.1016/j.jcis.2020.06.071 ↗
14. Q. Xia, J. Hu, Q. Chen, L. Zhang, N/S Co-doped microporous carbon derived from PSSH-Melamine salt solution as cathode host for lithium-selenium batteries, J. Colloid Interface Sci., (2021).10.1016/j.jcis.2021.11.106 ↗
15. Graphite-N doped graphene quantum dots as semiconductor additive in perovskite solar cells10.1021/acsami.9b13375 ↗
16. Selenium clusters in Zn-glutamate MOF derived nitrogen-doped hierarchically radial-structured microporous carbon for advanced rechargeable Na–Se batteries10.1039/C8TA07662F ↗
17. Understanding the interactions between lithium polysulfides and N-doped graphene using density functional theory calculations10.1016/j.nanoen.2016.04.053 ↗
18. Superresilient hard carbon nanofabrics for sodium-ion batteries10.1002/smll.201906883 ↗
19. Graphitic carbon nitride (g-C3N4)-derived N-rich graphene with tuneable interlayer distance as a high-rate anode for sodium-ion batteries
20. Polyacrylonitrile-derived nanostructured carbon materials10.1016/j.progpolymsci.2019.02.003 ↗
21. Effects of annealing temperature on electrochemical performance of SnSx embedded in hierarchical porous carbon with N-carbon coating by in-situ structural phase transformation as anodes for lithium ion batteries10.1016/j.jmst.2020.12.068 ↗
22. High temperature oxidative resistance of polyacrylonitrile-methylmethacrylate copolymer powder converting to a carbonized monolith10.1016/j.eurpolymj.2011.10.006 ↗
23. Unraveling the nature of excellent potassium storage in small-molecule Se@peapod-like N-doped carbon nanofibers10.1002/adma.202003879 ↗
24. Encapsulation of SeS2 into nitrogen-doped free-standing carbon nanofiber film enabling long cycle life and high energy density K-SeS2 battery10.1021/acsnano.9b00980 ↗
25. Controlled architectures of poly(acrylonitrile-co-itaconic acid) for efficient structural transformation into carbon materials10.1016/j.carbon.2013.12.068 ↗
26. Polyacrylonitrile-based nanofibers—a state-of-the-art review10.1016/j.progpolymsci.2011.07.001 ↗
27. Porous Si@SiOx@N-rich carbon nanofibers as anode in lithium‐ion batteries under high temperature10.1002/celc.201901111 ↗
28. Amorphous, crystalline and crystalline/amorphous selenium nanowires and their different (de)Lithiation mechanisms10.1021/acs.chemmater.5b02753 ↗
29. High-performance method of carbon nanotubes modification by microwave plasma for thin composite films preparation10.1039/C7RA04707J ↗
30. Estimation of swelling characteristics of expansive soils with influence of clay mineralogy
31. Chemically activated hollow carbon nanospheres as a high-performance anode material for potassium ion batteries10.1039/C8TA09751H ↗
32. New insight into the confinement effect of microporous carbon in Li/Se battery chemistry: a cathode with enhanced conductivity
33. Covalent selenium embedded in hierarchical carbon nanofibers for ultra-high areal capacity Li-Se batteries10.1016/j.isci.2020.100919 ↗
34. Plasma treatment for nitrogen-doped 3D graphene framework by a conductive matrix with sulfur for high-performance Li-S batteries10.1002/smll.201804347 ↗
35. Free-standing nitrogen-doped graphene paper as electrodes for high-performance lithium/dissolved polysulfide batteries10.1002/cssc.201402329 ↗
36. Nitrogen, sulfur co-doped hierarchically porous carbon as a metal-free electrocatalyst for oxygen reduction and carbon dioxide reduction reaction10.1021/acsami.0c06506 ↗
37. Three-dimensional hierarchical graphene-CNT@Se: a highly efficient freestanding cathode for Li–Se batteries10.1021/acsenergylett.6b00015 ↗
38. Interface engineering of MXene composite separator for high-performance Li-Se and Na-Se batteries
39. Carbon coated amorphous bimetallic sulfide hollow nanocubes towards advanced sodium ion battery anode10.1016/j.carbon.2019.05.048 ↗
40. Self-formed channel boosts ultrafast lithium ion storage in Fe3O4@nitrogen-doped carbon nanocapsule10.1021/acsami.9b16184 ↗
41. High-rate, long-term performance of LTO-pillared silicon/carbon composites for lithium-ion batteries anode under high temperature10.1016/j.jallcom.2019.06.023 ↗
42. Three-dimensional hierarchical C-Co-N/Se derived from metal-organic framework as superior cathode for Li-Se batteries10.1016/j.jpowsour.2017.07.065 ↗