Formation mechanism of ceramic/metal composite spherical magnetic abrasive prepared via gas-solid atomization
Source abstract
Abstract
In order to prepare good magnetic abrasive particles (MAPs) and make it play a better role in magnetic abrasive finishing (MAF), an experimental investigation on the formation mechanism of Al 2O 3 /Fe-based composite spherical MAPs prepared via gas-solid atomization is presented. The morphology of MAPs and the distribution of Al 2O 3 abrasives inside and outside the iron matrix were characterized by scanning electron microscopy and energy-dispersive spectroscopy. The breaking mechanism of gas-solid two-phase flow to molten metal was analyzed by comparing with the metal powder prepared via gas atomization. The formation mechanism of MAPs was studied by analyzing and calculating the mutual movement and cooling process between Al 2O 3 abrasive and metal droplet. The results show that the breaking mechanism of gas-solid two-phase flow to molten metal is quite different from that of pure gas. Under the same experimental conditions, the average particle size of MAPs prepared by gas-solid atomization is smaller than that of metal powders prepared by gas atomization. After observing the surface and cross-section of MAP, it is found that Al 2O 3 abrasives are only evenly and densely distributed on the surface of iron matrix, and there is almost no Al 2O 3 abrasives inside the iron matrix. The calculation shows that in the process of MAPs’ formation, the time of Al 2O 3 abrasive moving from the inside to the surface of the droplet is less than that of droplet cooling.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced materials and composites · Erosion and Abrasive Machining
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Modeling of material removal in ultrasonic assisted magnetic abrasive finishing process10.1016/j.ijmecsci.2017.07.023 ↗
2. Metastable austenitic stainless steel tool for magnetic abrasive finishing10.1016/j.cirp.2011.03.119 ↗
3. Enhanced magnetic abrasive polishing of non-ferrous metals utilizing a permanent magnet10.1016/j.ijmachtools.2009.01.013 ↗
4. Fabrication of precision meso-scale diameter ZrO2 ceramic bars using new magnetic pole designs in ultra-precision magnetic abrasive finishing10.1016/j.ceramint.2020.04.022 ↗
5. A newly developed media for magnetic abrasive finishing process: material removal behavior and finishing performance10.1016/j.jmatprotec.2018.05.007 ↗
6. Study on the inner surface finishing of tubing by magnetic abrasive finishing10.1016/j.ijmachtools.2004.06.014 ↗
7. Comprehensive performance evaluation of the magnetic abrasive particles10.1007/s00170-013-4783-6 ↗
8. A novel magnetic field-assisted mass polishing of freeform surfaces10.1016/j.jmatprotec.2019.116552 ↗
9. Study the characteristics of magnetic finishing with gel abrasive10.1016/j.ijmachtools.2009.07.009 ↗
10. New spherical magnetic abrasives with carried diamond particles for internal finishing of capillary tubes10.1016/j.diamond.2008.01.100 ↗
11. Achieving in-situ alloy-hardening core-shell structured carbonyl iron powders for magnetic abrasive finishing10.1016/j.matdes.2021.110198 ↗
12. Processing performance of Al2O3/Fe-based composite spherical magnetic abrasive particles10.1016/j.jmmm.2021.167811 ↗
13. Study on cylindrical magnetic abrasive finishing using unbonded magnetic abrasives10.1016/S0890-6955(01)00153-5 ↗
14. Design, preparation and characterization of iron nitride magnetic abrasives10.1016/j.jallcom.2018.09.389 ↗
15. Preparation of white alumina spherical composite magnetic abrasive by gas atomization and rapid solidification10.1016/j.scriptamat.2011.05.021 ↗
16. New iron-based SiC spherical composite magnetic abrasive for magnetic abrasive finishing10.3901/CJME.2013.02.377 ↗
17. Influence of process conditions on preparation of CBN/Fe-based spherical magnetic abrasive via gas atomization10.1016/j.ceramint.2021.08.010 ↗
18. Preparation and characterization of spherical diamond magnetic abrasive powder by atomization process10.1016/j.diamond.2019.107658 ↗
19. Fabrication of A356 composite reinforced with micro and nano Al2O3 particles by a developed compocasting method and study of its properties10.1016/j.jallcom.2011.08.105 ↗
20. Degradation mechanism of 6063 aluminium matrix composite reinforced with TiC and Al2O3 particles10.1016/j.jallcom.2020.157838 ↗
21. Corrosion, optimization and surface analysis of Fe-Al2O3-CeO2 metal matrix nanocomposites10.1177/09544062211047844 ↗
22. Chen · 1985
23. Thermal atomization during droplet impingement on superhydrophobic surfaces: influence of Weber number and micropost array configuration10.1016/j.ijheatmasstransfer.2020.120559 ↗
24. Rebound of self-lubricating compound drops10.1126/sciadv.aay3499 ↗
25. Criterion of gas and solid dual-phase flow atomization crash in molten metal10.1016/S1003-6326(14)63049-1 ↗
26. Coalescence and break-up of drops in two-phase flows10.1016/0301-9322(84)90017-X ↗
27. Molecular nature of the drag force10.1016/j.molliq.2021.116466 ↗
28. Viscosity of molten iron and steel
29. Numerical treatment of rapid solidification10.1007/BF02667341 ↗
30. Spray casting: an integral model for process understanding and control10.1016/0921-5093(91)90665-A ↗
31. Modelling of droplet dynamic and thermal histories during spray forming—I. individual droplet behaviour10.1016/0956-7151(93)90039-U ↗
32. Prediction of dendrite arm spacing for low alloy steel casting processes10.1007/BF02915668 ↗