Pressure-dependent microstructure evolution of Fe-based amorphous alloy powders via high-pressure gas atomization
Source abstract
Abstract
The pressure-dependent microstructure evolution of the gas-atomized Fe-based amorphous alloy powders at gas pressures in the range from 5 MPa to 8 MPa has been studied experimentally and theoretically. The results showed that the amorphous fraction and nucleation mode of particles were sensitive to the gas pressure. Specifically, at 7 MPa, the particles presented a fully amorphous structure with the maximal size class of 45–75 µm, and preferred to nucleate heterogeneously within the sphere rather than on the surface. These interesting phenomena were associated with the difference of cooling rate within droplets, reflected by the gas-liquid relative velocity at the cooling and solidification stage in the atomization process. It was also indicated that the amorphous phase underwent three stages of reactions upon devitrification with the precipitations of {Fe, Ni} and Fe 2P, α-Fe and M 23B 6 , respectively. Finally, glass-forming features of powders at different pressures have been elucidated based upon a kinetics analysis of the cooling rates of droplets and the phase selection competition. This work provides beneficial guidance for the devisal of metallic glass powder with different microstructures via gas atomization.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Glass properties and applications · Material Dynamics and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. 3D printing of bulk metallic glasses10.1016/j.mser.2021.100625 ↗
2. Crystallization in additive manufacturing of metallic glasses: a review
3. Processing metallic glasses by selective laser melting10.1016/j.mattod.2013.01.018 ↗
4. Synthesis of Fe–Cr–Mo–C–B–P bulk metallic glasses with high corrosion resistance10.1016/S1359-6454(01)00366-4 ↗
5. Crystallization prediction on laser three-dimensional printing of Zr-based bulk metallic glass10.1016/j.jnoncrysol.2017.01.038 ↗
6. Selective laser melting of Zr-based bulk metallic glasses: Processing, microstructure and mechanical properties10.1016/j.matdes.2016.09.071 ↗
7. 3D printing of Fe-based bulk metallic glass composites with combined high strength and fracture toughness10.1016/j.matdes.2018.01.061 ↗
8. 3D printing of Fe-based bulk metallic glasses and composites with large dimension and enhanced toughness by thermal spraying10.1039/C8TA00405F ↗
9. Feedstock powder processing research needs for additive manufacturing development10.1016/j.cossms.2018.01.002 ↗
10. Fe-based bulk metallic glasses: glass formation, fabrication, properties and applications10.1016/j.pmatsci.2019.01.003 ↗
11. Experimental determination of a time-temperature-transformation diagram of the undercooled Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 alloy using the containerless electrostatic levitation processing technique10.1063/1.116247 ↗
12. Beating crystallization in glass-forming metals by millisecond heating and processing10.1126/science.1201362 ↗
13. Quantitative evaluation of critical cooling rate for metallic glasses10.1016/S0921-5093(00)01446-5 ↗
14. Bulk metallic glass formation in the binary Cu–Zr system10.1063/1.1751219 ↗
15. Multiple maxima of GFA in three adjacent eutectics in Zr–Cu–Al alloy system – A metallographic way to pinpoint the best glass forming alloys10.1016/j.actamat.2005.03.012 ↗
16. Microstructure evolution of the rapidly solidified alloy powders and composite powders10.1016/j.matdes.2019.108045 ↗
17. Phase structures of gas atomized equiatomic CrFeNiMn high entropy alloy powder10.1016/j.jallcom.2020.154142 ↗
18. Increasing the amorphous yield of {(Fe0.6Co0.4) 0.75B0.2Si0.05}96Nb4 powders by hot gas atomization10.1016/j.apt.2017.11.025 ↗
19. Novel cooling rate correlations in molten metal gas atomization10.1007/s11663-019-01508-0 ↗
20. The instability and droplet size distribution of liquid-liquid coaxial swirling spray: an experimental investigation10.1016/j.expthermflusci.2016.11.014 ↗
21. Computational validation of an isentropic plug nozzle design for gas atomisation10.1016/j.commatsci.2007.07.013 ↗
22. Specific heat capacities of Fe–Co–Cr–Mo–C–B–Y bulk metallic glasses and their correlation with glass-forming ability10.1016/j.matlet.2014.12.117 ↗
23. Impact of gas pressure on particle feature in Fe-based amorphous alloy powders via gas atomization: Simulation and experiment10.1016/j.jmst.2021.06.075 ↗
24. Numerical simulation study on cooling of metal droplet in atomizing gas
25. Numerical simulation of heavy fuel oil atomization using a pulsed pressure-swirl injector10.1016/j.cjche.2020.07.053 ↗
26. Solidification behavior of undercooled Pd83Si17 and Pd82Si18 liquid droplets
27. Microstructural variations in rapidly solidified alloys10.1016/0025-5416(88)90140-1 ↗
28. Thermodynamics and kinetics of the Zr41.2Ti13.8Cu10.0Ni12.5Be22.5 bulk metallic glass forming liquid: glass formation from a strong liquid10.1016/S0022-3093(99)00133-7 ↗
29. Thermodynamics and kinetics of the undercooled liquid and the glass transition of the Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 alloy10.1063/1.359485 ↗
30. Modelling of nucleation in impulse atomized undercooled droplets10.1016/j.commatsci.2017.12.004 ↗
31. Development and applications of Fe- and Co-based bulk glassy alloys and their prospects10.1016/j.jallcom.2013.11.122 ↗
32. Lavernia · 1996
33. A numerical simulation of gas flow field effects on high pressure gas atomization due to operating pressure variation10.1016/0921-5093(95)10046-6 ↗
34. Process modeling pressure-swirl-gas-atomization for metal powder production10.1016/j.jmatprotec.2016.08.009 ↗
35. P.T. Sarjeant, R. Roy, A new approach to the prediction of glass formation, International Conference on the Characterization of Materials, Pergamon Press, Inc., Rochester, N. Y., USA, 1968, pp. 265–280.10.1016/0025-5408(68)90127-X ↗