journal article·2022-10

Effects of hot-rolling on secondary electron yield properties of Cu-2.7Be alloy

Daibo Zhu, Qin Zeng, Yang Liu, Chenbo Li, Liwei Lu, Tan Han, Guilan Xie, Xin Shu

Publisher page

Abstract

The effects of hot-rolling on the secondary electron property evolution of activated Cu-2.7Be sheets were investigated in this study. The microstructures of both pristine and activated Cu-2.7Be alloys subjected to different hot-rolling temperatures were characterized. Their phase compositions were found to comprise an α matrix and eutectoid phases ( α + γ ). Using electron back-scattered diffraction, the initial average grain size ( d 0) was found to vary from 6.45 μm to 15.63 μm as the hot-rolling temperature increased from 680 °C to 830 °C. Scanning electron microscopy and X-ray photoelectron spectroscopy studies of the activated Cu-2.7Be sheets revealed that the amount of BeO increased with a decrease in the average grain size, resulting in the enhancement of the peak secondary electron emission yield. Scanning Kelvin probe force microscopy measurements confirmed that the main contributor to the BeO enhancement was the α matrix, while transmission electron microscopy analysis showed that BeO formed preferentially from sub-grain boundaries, indicating the importance of grain boundaries for BeO formation. Moreover, the peak secondary electron yield ( δ m) exhibited a linear relationship with d 0 −0.5 similar to the Hall-Petch relation. The results in this study will be important for enhancing the secondary electron yield of Cu-Be dynodes used in photomultiplier tubes and electron multipliers.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electron and X-Ray Spectroscopy Techniques · ZnO doping and properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Precipitation behavior, microstructure and properties of aged Cu-1.7 wt% Be alloy10.1016/j.jallcom.2018.09.296 ↗
2. Influence of ageing process on sound velocity in C17200 copper–beryllium alloy10.1016/j.jallcom.2010.06.128 ↗
3. Influence of microstructure on the Young’s modulus in a Cu-2Be (wt%) alloy10.1016/j.jallcom.2017.09.121 ↗
4. Precipitation behavior and properties of aged Cu-0.23Be-0.84Co alloy10.1016/j.jallcom.2015.10.290 ↗
5. Influence of the substrate temperature on the microstructure and electron-induced secondary electron emission properties of MgO/Au composite film10.1016/j.materresbull.2018.01.002 ↗
6. Microstructural characterization of MgO thin films grown by radio-frequency sputtering. Target and substrate-temperature effect10.1063/1.1558964 ↗
7. Synthesis, characterization, and crystal structures of aryl-substituted ferrocenylpyrimidines by site-selective stepwise couplings of 2,4,6-trichloropyrimidine10.1007/s00706-013-1142-0 ↗
8. Secondary electron emission properties of double-layer B-doped diamond films10.1016/j.diamond.2020.107826 ↗
9. Secondary electron emission performance of the surface Ni-doped MgO-Au thin film under continuous electron bombardment10.1016/j.matlet.2020.128452 ↗
10. Experimental research on influence of gas adsorption on secondary electron emission of copper surface
11. Activation of silver‐magnesium and copper‐beryllium dynodes10.1063/1.1723236 ↗
12. Preparation and characteristics of a channel electron multiplier10.1063/1.1685497 ↗
13. Activation treatment study of Cu-Be alloy and its secondary electron emission characteristics10.5702/massspec1953.18.994 ↗
14. Surface analysis of Cu–Be dynode10.1116/1.570643 ↗
15. Surface composition and morphology vs secondary-electron yield of Be–Cu dynodes10.1116/1.568716 ↗
16. The BeCu (Beryllium-Copper) system
17. Effects of changing hot rolling direction on microstructure, texture and mechanical properties of Cu-2.7Be sheets10.1007/s11665-018-3292-z ↗
18. Microstructure and mechanical evolution of Cu-2.7Be sheets via annealing10.3390/met10020241 ↗
19. Activation treatment effects on characteristics of BeO layer and secondary electron emission properties of an activated Cu-Be alloy10.1016/j.apsusc.2015.06.189 ↗
20. Correlations of plasma parameters and properties of magnetron sputtered TiN films10.1051/epjap/2012120108 ↗
21. Role of grain size and particle velocity distribution in secondary electron emission in space plasmas10.1029/93JA02014 ↗
22. Surface characterization determined from the secondary electron emission coefficient upon ion bombardment
23. Improving the mechanical behavior of an ultraflne grained Cu-6.4vol% NbC nanocomposite by hot rolling10.1016/j.matlet.2020.127456 ↗
24. Hot rolling process for texture development and grain refinement of n-type Bi2Te3 alloys10.1016/j.matlet.2021.130278 ↗
25. Effects of secondary β and γ phases on the work function properties of Cu–Be alloys10.1007/s00339-015-9271-4 ↗
26. Grain refinement kinetics and strengthening mechanisms in Cu–0.3Cr–0.5Zr alloy subjected to intense plastic deformation10.1016/j.msea.2015.12.038 ↗
27. Wear resistance and electroconductivity in copper processed by severe plastic deformation10.1016/j.wear.2013.06.001 ↗
28. XPS of cold pressed multilayered and freestanding delaminated 2D thin films of Mo2TiC2Tz and Mo2Ti2C3Tz (MXenes)10.1016/j.apsusc.2019.07.049 ↗
29. Capacity fading mechanism of Li2O loaded NiFe2O4 /SiO2 aerogel anode for lithium-ion battery: ex-situ XPS analysis
30. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
31. Melanin system composition analyzed by XPS depth profiling
32. First principles study of native defects in BeO10.1016/j.phpro.2012.03.675 ↗
33. The adsorption and dissociation of N2O on CuO(111) surface: the effect of surface structures10.1016/j.susc.2020.121596 ↗
34. CO-tolerant Pt–BeO as a novel anode electrocatalyst in proton exchange membrane fuel cells10.3390/catal6050068 ↗
35. Three newly developed BeO-based OSL dosimeters10.1016/j.jlumin.2021.118528 ↗
36. Effect of film thickness on the temperature dependence of thermal conductivity for diamond/BeO composites10.1016/j.ceramint.2015.06.020 ↗
37. Advanced silicon-on-insulator: crystalline silicon on atomic layer deposited beryllium oxide10.1038/s41598-017-13693-6 ↗
38. A study of highly crystalline novel beryllium oxide film using atomic layer deposition10.1016/j.jcrysgro.2011.08.040 ↗
39. Electrochemical properties of intermetallic phases and common impurity elements in magnesium alloys10.1149/1.3523229 ↗
40. Corrosion behavior characterization of as extruded Mg-8Li-3Al alloy with minor alloying elements (Gd, Sn and Cu) by scanning Kelvin probe force microscopy
41. Electronegativities of the elements10.1063/1.1742493 ↗
42. A TEM investigation of naturally formed oxide films on pure magnesium10.1016/S0010-938X(97)00037-1 ↗
43. Quantitative analysis on surface potentials of impurities and intermetallic compounds dispersed in Mg alloys using scanning Kelvin probe force microscopy and ultraviolet photoelectron spectroscopy
44. Work function and secondary emission studies of various Cu crystal faces10.1063/1.323329 ↗
45. Effects of secondary β and γ phases on the work function properties of Cu–Be alloys10.1007/s00339-015-9271-4 ↗
46. Generic relation between the electron work function and Young’s modulus of metals10.1063/1.3614475 ↗
47. Ultrafine grains and the Hall-Petch relationship in an Al-Mg-Si alloy processed by high-pressure torsion10.1016/j.msea.2011.10.074 ↗
48. Grain size distribution effects on the corrosion behaviour of materials10.1016/j.corsci.2012.04.040 ↗
49. Revealing the relationship between grain size and corrosion rate of metals10.1016/j.scriptamat.2010.08.035 ↗