journal article·2022-07

Exploring the optimal two-step selenization process to enhance the performance of ionic liquid solution based Cu2ZnSn(S,Se)4 thin film solar cells

Yajin Mi, Yanchun Yang, Guonan Cui, Junting Ren, Yanqing Liu, Xin Zhao, Xiao Tian, Tana Bao, Yiming Wang, Shuyu Li, Chengjun Zhu

Publisher page

Abstract

Two-step selenization process has been proved to control Cu 2ZnSn(S,Se) 4 (CZTSSe) crystallization growth, helping to fabricate a homogeneous large-grain structure of CZTSSe absorber. The two-step selenization process is usually composed of the low-temperature nucleation (LT) and high-temperature grain growth reaction (HT) processes. Here, an exploration of optimizing the annealing conditions at each step in the two-step process is reported to obtain the excellent structure of ionic liquid solution based Cu 2ZnSn(S,Se) 4 absorber, boosting performance of the solar cell. Based on the basic requirement of an absorber candidate for solar cells (the compact films), three effective kinds of two-step process are confirmed (LT400–10&HT540–10, LT400–10&HT550–10, and LT400–10&HT560–10). We further explore the other properties of sample prepared by one-step and these three kinds of two-step process, respectively, and the optimal two-step process can be identified as LT400–10&HT550–10, which also confirms a homogeneous large-grain structure of CZTSSe absorber. Finally, CZTSSe solar cell with the highest efficiency of 9.24% can be achieved, which can be improved 67% than one by one-step annealing process (5.54%).
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Effect of solid-H2S gas reactions on CZTSSe thin film growth and photovoltaic properties of a 12.62% efficiency device10.1039/C9TA08310C ↗
2. Band-gap-graded Cu2ZnSn(S,Se)4 drives highly efficient solar cells10.1039/D1EE03134A ↗
3. Improving carrier-transport properties of CZTS by Mg incorporation with spray pyrolysis10.1021/acsami.9b05244 ↗
4. Co-electrodeposited Cu2ZnSnS4 thin-film solar cells with over 7% efficiency fabricated via fine-tuning of the Zn content in absorber layers10.1039/C5TA09636G ↗
5. Investigation of low intensity light performances of kesterite CZTSe, CZTSSe, and CZTS thin film solar cells for indoor applications10.1039/D0TA04863A ↗
6. A new insight of In-doped Cu2ZnSn(S,Se)4 thin films for photovoltaic application10.1016/j.jallcom.2020.154492 ↗
7. Metal sulfide precursor aqueous solutions for fabrication of Cu2ZnSn(S,Se)4 thin film solar cells10.1039/C4GC01828A ↗
8. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency
9. Realization of 11.5% Efficiency Cu2ZnSn(S,Se)4 thin-film solar cells by manipulating the phase structure of precursor films10.1002/solr.202100216 ↗
10. Improvement of Cu2ZnSn(S,Se)4 solar cells by adding N,N-dimethylformamide to the dimethyl sulfoxide-based precursor ink10.1002/cssc.201803009 ↗
11. Identifying the origin of the Voc deficit of kesterite solar cells from the two grain growth mechanisms induced by Sn2+ and Sn4+ precursors in DMSO solution10.1039/D0EE03702H ↗
12. Sn4+ precursor enables 12.4% efficient kesterite solar cell from DMSO solution with open circuit voltage deficit below 0.30 V10.1007/s40843-020-1408-x ↗
13. NREL, Best Research-Cell Efficiency Chart, 〈https://www.nrel.gov/pv/assets/pdfs/best-research-cell-efficiencies-rev210726.pdf〉 (Accessed 07, 2021).
14. Ionic liquid-assisted green solution approach for high-performance Cu2ZnSn(S,Se)4 thin film solar cells10.1016/j.jpowsour.2020.228529 ↗
15. Efficient and composition-tolerant kesterite Cu2ZnSn(S,Se)4 solar cells derived from an in situ formed multifunctional carbon framework10.1002/aenm.202102298 ↗
16. Performance improvement of Cu2ZnSn(S,Se)4 thin-film solar cells by optimizing the selenization temperature10.1063/5.0053633 ↗
17. Surface defect ordered Cu2ZnSn(S,Se)4 solar cells with efficiency over 12% via manipulating local substitution10.1016/j.jechem.2021.10.035 ↗
18. Complex interplay between absorber composition and alkali doping in high-efficiency kesterite solar cells10.1002/aenm.201701760 ↗
19. Nanoscale electrical property enhancement through antimony incorporation to pave the way for the development of low-temperature processed Cu2ZnSn(S,Se)4 solar cells10.1039/C8TA11783G ↗
20. Significantly improving the crystal growth of a Cu2ZnSn(S,Se)4 absorber layer by air-annealing a Cu2ZnSnS4 precursor thin film10.1021/acsami.0c12630 ↗
21. Phase-separation-induced crystal growth for large-grained Cu2ZnSn(S,Se)4 thin film10.1021/acsami.8b10749 ↗
22. CZTSSe solar cell with an efficiency of 10.19% based on absorbers with homogeneous composition and structure using a novel two-step annealing process10.1016/j.solener.2020.07.016 ↗
23. A high-efficiency (12.5%) kesterite solar cell realized by crystallization growth kinetics control over aqueous solution based Cu2ZnSn(S,Se)410.1039/D1TA09024K ↗
24. High-efficiency Cu2ZnSn(S,Se)4 solar cells fabricated through a low-cost solution process and a two-step heat treatment10.1002/pip.2810 ↗
25. Large-grain spanning monolayer Cu2ZnSnSe4 thin-film solar cells grown from metal precursor
26. The effect of S/(S+Se) ratios on the formation of secondary phases in the band gap graded Cu2ZnSn(S,Se)4 thin film solar cells10.1016/j.jallcom.2019.04.118 ↗
27. Device characteristics of band gap tailored 10.04% efficient CZTSSe solar cells sprayed from water-based solution10.1021/acsami.9b12565 ↗
28. Se-assisted performance enhancement of Cu2ZnSn(S,Se)4 quantum-dot sensitized solar cells via a simple yet versatile synthesis10.1021/acs.inorgchem.9b02154 ↗
29. Selenate precursor for synthesis of CZTSSe: performance as thin film solar cell10.1016/j.jallcom.2019.03.208 ↗
30. Boosting the electrical properties of Cu2ZnSn(S,Se)4 solar cells via low amounts of Mg substituting Zn10.1021/acsaem.0c02121 ↗
31. Novel symmetrical bifacial flexible CZTSSe thin film solar cells for indoor photovoltaic applications10.1038/s41467-021-23343-1 ↗
32. Nanoscale charge transport and local surface potential distribution to probe the defect passivation in Cr-substituted earth abundant CZTS absorber layer10.1016/j.jallcom.2020.157160 ↗
33. Effects of selenization conditions on microstructure evolution in solution processed Cu2ZnSn(S,Se)4 solar cells10.1016/j.solmat.2019.03.024 ↗
34. Achieving low VOC-deficit characteristics in Cu2ZnSn(S,Se)4 solar cells through improved carrier separation10.1021/acsami.0c16936 ↗
35. Flexible Cu2ZnSn(S,Se)4 solar cells with over 10% efficiency and methods of enlarging the cell area10.1038/s41467-019-10890-x ↗
36. Mechanism of enhanced power conversion efficiency of Cu2ZnSn(S,Se)4 solar cell by cadmium surface diffusion doping10.1016/j.jallcom.2021.160160 ↗
37. High-efficiency (LixCu1-x)2ZnSn(S,Se)4 kesterite solar cells with lithium alloying10.1002/aenm.201801191 ↗
38. Defect characterisation in Cu2ZnSnSe4 kesterites via resonance Raman spectroscopy and the impact on optoelectronic solar cell properties10.1039/C9TA03625C ↗
39. Ag incorporation with controlled grain growth enables 12.5% efficient kesterite solar cell with open circuit voltage reached 64.2% Shockley-Queisser limit10.1002/adfm.202101927 ↗
40. Defect engineering in earth-abundant Cu2ZnSn(S,Se)4 photovoltaic materials via Ga3+-doping for over 12% efficient solar cells10.1002/adfm.202010325 ↗
41. Effect of Cd on cation redistribution and order-disorder transition in Cu2(Zn,Cd)SnS410.1039/C9TA09572A ↗
42. Upper limit to the photovoltaic efficiency of imperfect crystals from first principles10.1039/D0EE00291G ↗
43. Enhancing electrical properties of Cu2ZnSn(S,Se)4 thin films via trace Co incorporation10.1016/j.matchemphys.2021.124318 ↗
44. Influence of extra trace Mn-doping on the properties of Cu2ZnSn(S,Se)4 absorber layer
45. Progress and prospects of CZTSSe/CdS interface engineering to combat high open-circuit voltage deficit of kesterite photovoltaics: a critical review10.1039/D0TA06450E ↗
46. Efficiency improvement of flexible Cu2ZnSn(S,Se)4 solar cells by window layer interface engineering10.1021/acsaem.1c03149 ↗
47. Strengthening the properties of earth-abundant Cu2ZnSn(S,Se)4 photovoltaic materials via cation incorporation with Ni10.1021/acsaem.1c03687 ↗
48. 9.63% efficient flexible Cu2ZnSn(S,Se)4 solar cells fabricated via scalable doctor-blading under ambient conditions10.1039/D1TA07073H ↗
49. Kesterite solar-cells by drop-casting of inorganic sol-gel inks10.1016/j.solener.2020.07.093 ↗
50. Evolution of morphology and composition during annealing and selenization in solution-processed Cu2ZnSn(S,Se)410.1021/acs.chemmater.7b03313 ↗