journal article·2022-04

Thermal deformation behavior of GO/CeO2 in-situ reinforced Cu30Cr10W electrical contact material

Shengli Liang, Meng Zhou, Yi Zhang, Shuang Liu, Xu Li, Baohong Tian, Yongfeng Geng, Yijie Ban, Yanlin Jia, Yong Liu, Alex A. Volinsky

Publisher page

Abstract

Cu30Cr10W and GO/CeO 2 -Cu30Cr10W composites were fabricated by the spark plasma sintering (SPS). The isothermal compression tests of the Cu30Cr10W and GO/CeO 2 -Cu30Cr10W composites were carried out on the Gleeble-1500 thermo-mechanical simulator under the deformation temperatures of 600–900 °C and strain rates of 0.001–1 s −1. The effects of graphene doped CeO 2 on the thermal deformation behavior and microstructure of the composites were investigated. The results show that a trace amount of Cr 7C 3 layers/nanoparticles was in-situ formed at the interface between graphene and metal matrix, and the interfacial adhesion of composites improved significantly. The Cr particles grew in strip shape perpendicular to the compression direction, and the edge of tungsten carbide particles deformed slightly. With the increased of deformation temperature from 700 ℃ to 900 ℃, the texture component changed to fiber texture. In addition, the constitutive equations of the three composites were obtained. Compared with Cu30Cr10W composites, the addition of GO/CeO 2 and the accompanying twinning mechanism increased the flow stress, and the activation energy increased by 8.4% and 33.1%, respectively. Furthermore, the hot working performance is obviously improved.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Electrical Contact Performance and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. High strength and conductivity copper matrix composites reinforced by in-situ graphene through severe plastic deformation processes10.1016/j.jallcom.2020.156703 ↗
2. Processing, characterization and properties of copper-based composites strengthened by low amount of alumina particles10.1016/j.powtec.2014.08.051 ↗
3. Synthesis and characterization of copper–alumina metal matrix composite by conventional and spark plasma sintering10.1016/j.jallcom.2011.11.136 ↗
4. Experimental study on tribological properties of Cu-Al2O3 nanocomposite hybridized by graphene nanoplatelets10.1016/j.ceramint.2019.08.220 ↗
5. The compressibility of Cu/SiCp powder prepared by high-energy ball milling10.1016/j.jmatprotec.2007.07.038 ↗
6. Wear resistance of WC particle reinforced copper matrix composites and the effect of porosity10.1016/j.msea.2005.11.036 ↗
7. Microstructure evolution, electrical conductivity and mechanical properties of dual-scale Cu5Zr/ZrB2 particulate reinforced copper matrix composites
8. Spark plasma sintering of copper matrix composites reinforced with TiB2 particles10.3390/ma13112602 ↗
9. Strength and electrical conductivity behavior of nanoparticles reaction on new alumina dispersion-strengthened copper alloy10.1016/j.jallcom.2019.05.271 ↗
10. Investigation of arc erosion mechanism for tin dioxide-reinforced silver-based electrical contact material under direct current10.1007/s11664-020-08193-9 ↗
11. Synthesis of Ce-doped NiAl LDH/RGO composite as an efficient photocatalyst for photocatalytic degradation of ciprofloxacin10.1016/j.jece.2021.105405 ↗
12. General overview of graphene: Production, properties and application in polymer composites10.1016/j.mseb.2016.10.004 ↗
13. Reinforcement with graphene nanosheets in aluminum matrix composites10.1016/j.scriptamat.2012.01.012 ↗
14. Graphene and Graphene Oxide: Synthesis, Properties, and Applications10.1002/adma.201001068 ↗
15. Less defective fluorine-containing graphene with good dispersity: Preparation, characterization, and application in transparent conductive thin film10.1016/j.carbon.2017.01.021 ↗
16. Mechanical properties and thermal conductivity of graphene reinforced copper matrix composites10.1016/j.powtec.2016.06.045 ↗
17. Low-temperature preparation of magnetically separable Fe3O4@ZnO-RGO for high-performance removal of methylene blue in visible light10.1016/j.jallcom.2019.153366 ↗
18. Graphene oxide effects on the properties of Al2O3-Cu/35W5Cr composite10.1016/j.jmst.2019.08.014 ↗
19. Effects of Cr addition on the constitutive equation and precipitated phases of copper alloy during hot deformation10.1016/j.matdes.2020.108613 ↗
20. EBSD analysis of hot deformation behavior of Cu-Ni-Co-Si-Cr alloy10.1016/j.matchar.2020.110656 ↗
21. Deformation behavior at room temperature of W-80vol% Cu composite10.1016/j.ijrmhm.2004.01.002 ↗
22. One-step synthesis of reduced graphene oxide based ceric dioxide modified with cadmium sulfide (CeO2/CdS/RGO) heterojunction with enhanced sunlight-driven photocatalytic activity10.1016/j.jcis.2021.03.034 ↗
23. Effect of in situ graphene-doped nano-CeO2 on microstructure and electrical contact properties of Cu30Cr10W contacts10.1515/ntrev-2021-0031 ↗
24. Synthesis of graphene: Potential carbon precursors and approaches10.1515/ntrev-2020-0100 ↗
25. Competition between dynamic recovery and recrystallization during hot deformation for TC18 titanium alloy10.1016/j.msea.2015.03.071 ↗
26. Effects of Ce and Y addition on microstructure evolution and precipitation of Cu-Mg alloy hot deformation10.1016/j.jallcom.2018.12.022 ↗
27. Thermal deformation behavior of the Al2O3-Cu/(W,Cr) electrical contacts10.1016/j.vacuum.2019.03.054 ↗
28. Effect of Ti addition on microstructure evolution and precipitation in Cu-Co-Si alloy during hot deformation10.1016/j.jallcom.2019.153518 ↗
29. Hot deformation behavior and workability characteristic of a fine-grained Mg-8Sn-2Zn-2Al alloy with processing map10.1016/j.jmst.2018.12.001 ↗
30. Hot deformation behavior of Cu–0.6Cr–0.03Zr alloy during compression at elevated temperatures10.1016/j.msea.2013.01.059 ↗
31. Effect of Ce addition on microstructure evolution and precipitation in Cu-Co-Si-Ti alloy during hot deformation10.1016/j.jallcom.2020.155666 ↗
32. Effects of Ce addition on the Cu-Mg-Fe alloy hot deformation behavior10.1016/j.vacuum.2018.06.006 ↗
33. Interface structure and strengthening behavior of graphene/CuCr composites10.1016/j.carbon.2018.03.018 ↗
34. Gibbs energies of formation of chromium carbides10.1007/BF02651941 ↗
35. Thermodynamic investigations of Cr3C2 and reassessment of the Cr-C system10.1007/s11661-004-0273-7 ↗
36. Dynamic recrystallisation and precipitation behavior of high strength and highly conducting Cu-Ag-Zr-alloys10.1016/j.msea.2013.12.051 ↗
37. Deformation microstructures, strengthening mechanisms, and electrical conductivity in a Cu-Cr-Zr alloy10.1016/j.msea.2015.01.065 ↗
38. Influence of phosphorus on hot deformation microstructure of a Ni-Fe-Cr based alloy
39. Effect of initial state on hot deformation and dynamic recrystallization of Ni-Fe based alloy GH984G for steam boiler applications10.1016/j.jallcom.2019.05.022 ↗
40. Excellent mechanical properties and high electrical conductivity of Cu-Co-Si-Ti alloy due to multiple strengthening10.1016/j.msea.2021.141639 ↗
41. Constitutive modeling and prediction of hot deformation flow stress under dynamic recrystallization conditions10.1016/j.mechmat.2015.02.014 ↗
42. Effect of strain rate upon plastic flow of steel10.1063/1.1707363 ↗
43. On the mechanism of hot deformation10.1016/0001-6160(66)90207-0 ↗
44. Microstructural development in Mg alloy AZ31 during hot working10.1016/S1359-6462(97)00344-8 ↗
45. Strength and structure under hot-working conditions10.1179/095066069790138056 ↗
46. Load transfer strengthening in carbon nanotubes reinforced metal matrix composites via in-situ tensile tests10.1016/j.compscitech.2015.03.009 ↗
47. Y. Gu, L.L. Hu, Effect of graphene addition on microstructure and properties of graphene/copper composite, IOP Conf. Ser: Earth. Environ. Sci. 651, 2021: 032002.10.1088/1755-1315/651/3/032002 ↗
48. Fabrication of graphene/copper nanocomposites via in-situ delamination of graphite in copper by accumulative roll-compositing10.1016/j.compositesb.2021.108850 ↗
49. Significantly enhancing the strength ductility combination of Mg-9Al alloy using multi-walled carbon nanotubes10.1016/j.jallcom.2019.03.243 ↗