Advanced tensile properties and strain rate sensitivity of titanium matrix composites reinforced with CaTiO3 particles
Source abstract
Abstract
In the present work, a novel reinforcement, i.e., CaTiO3 particles, was adopted to produce high performance Ti matrix composites (TMCs), via a powder metallurgy process followed by hot extrusion. The results revealed that the CaTiO3 particles successfully improved the strength of Ti without sacrificing the elongation to failure. In contrast with most of ceramic particles that decompose or react with Ti matrix, CaTiO3 particles remain chemically unchanged in the matrix. Importantly, unlike titanium carbide (TiC) and other chemically stable particles that are reported with sharp corner and irregular shapes, the CaTiO3 particles display a round profile that may weaken the stress concentration in the matrix. It is found that the yield strength increases from 406 MPa for pure Ti to more than 800 MPa for TMCs with only 2.5 wt% addition of CaTiO3, while maintaining the elongation to failure over 25%. The attractive mechanical property is attributed to the hardened grain boundaries and increased geometrically necessary dislocations (GNDs) caused by the CaTiO3 particles. Besides, the experimental results show that, due to the particle-induced strong dislocation pinning and GNDs hardening effect, the strain rate sensitivity was also found increased for TMCs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Titanium Alloys Microstructure and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Perspectives on titanium science and technology10.1016/j.actamat.2012.10.043 ↗
2. Advanced mechanical properties of powder metallurgy commercially pure titanium with a high oxygen concentration10.1557/jmr.2017.338 ↗
3. Microstructure and mechanical properties of SiC nanowires reinforced titanium matrix composites10.1016/j.jallcom.2019.152953 ↗
4. Advanced mechanical properties of a powder metallurgy Ti-Al-N alloy doped with ultrahigh nitrogen concentration10.1007/s11837-018-2780-9 ↗
5. Microstructure and mechanical properties of CP-Ti fabricated via powder metallurgy with non-uniformly dispersed impurity solutes10.1016/j.msea.2018.01.031 ↗
6. Reaction layers around SiC particles in Ti: an electron microscopy study10.1016/S1359-6454(99)00151-2 ↗
7. Production of titanium matrix composites reinforced with SiC particles10.1016/j.compscitech.2008.03.018 ↗
8. Recent advances in the design and fabrication of strong and ductile (tensile) titanium metal matrix composites
9. Progress on discontinuously reinforced titanium matrix composites10.1016/j.jallcom.2018.07.100 ↗
10. Size effect of B4C powders on metallurgical reaction and resulting tensile properties of Ti matrix composites by in-situ reaction from Ti–B4C system under a relatively low temperature10.1016/j.msea.2014.07.020 ↗
11. Strengthening behavior of in situ -synthesized (TiC–TiB)/Ti composites by powder metallurgy and hot extrusion10.1016/j.matdes.2016.01.092 ↗
12. Microstructure and mechanical property of in situ synthesized multiple-reinforced (TiB+TiC+La2O3)/Ti composites10.1016/j.jallcom.2007.01.087 ↗
13. High-performance Ti composites reinforced with in-situ TiC derived from pyrolysis of polycarbosilane
14. Interdependencies between graphitization of carbon nanotubes and strengthening mechanisms in titanium matrix composites10.1016/j.mtla.2018.08.015 ↗
15. Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy10.1016/j.actamat.2013.09.042 ↗
16. Effect of ceramic nanoparticle reinforcements on the quasistatic and dynamic mechanical properties of magnesium-based metal matrix composites10.1557/jmr.2013.16 ↗
17. Titanium carbide precipitation in Ti–22Nb alloy fabricated by metal injection moulding10.1179/0032589914Z.000000000153 ↗
18. Impacts of trace carbon on the microstructure of as-sintered biomedical Ti-15Mo alloy and reassessment of the maximum carbon limit10.1016/j.actbio.2013.10.034 ↗
19. A study on anomalous yield drop behaviour in modified beta titanium alloys10.1080/14786435.2019.1687950 ↗
20. Heterogeneous materials: a new class of materials with unprecedented mechanical properties10.1080/21663831.2017.1343208 ↗
21. High tensile-strength and ductile titanium matrix composites strengthened by TiB nanowires10.1016/j.scriptamat.2017.08.007 ↗
22. In situ preparation of TiB nanowires for high-performance Ti metal matrix nanocomposites10.1016/j.jallcom.2017.11.238 ↗
23. Laser deposition-additive manufacturing of TiB-Ti composites with novel three-dimensional quasi-continuous network microstructure: Effects on strengthening and toughening10.1016/j.compositesb.2017.09.019 ↗
24. Toughening of aluminum matrix nanocomposites via spatial arrays of boron carbide spherical nanoparticles10.1016/j.actamat.2015.09.057 ↗
25. The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials10.1016/j.pmatsci.2017.10.004 ↗
26. Strain rate effects in the ultrafine grain and nanocrystalline regimes—influence on some constitutive responses10.1007/s10853-006-0700-9 ↗
27. Residual stress and its effect on the mechanical properties of Y-doped Mg alloy fabricated via back-pressure assisted equal channel angular pressing (ECAP-BP)10.1016/j.msea.2016.05.067 ↗
28. Abnormal grain growth induced by cyclic heat treatment in Fe-Mn-Al-Ni superelastic alloy10.1016/j.matdes.2016.04.011 ↗
29. Abnormal grain growth in commercially pure titanium during additive manufacturing with electron beam melting10.1016/j.mtla.2019.100281 ↗
30. Tensile properties of Al matrix composites reinforced with in situ devitrified Al84Gd6Ni7Co3 glassy particles10.1016/j.jallcom.2013.04.190 ↗
31. Particle-reinforced aluminum matrix composites produced from powder mixtures via friction stir processing10.1016/j.compscitech.2011.01.013 ↗
32. Microstructure and mechanical properties of SiC particle reinforced magnesium composites processed by injection molding10.1016/j.msea.2011.04.088 ↗
33. Rate sensitivity and work-hardening behavior of an advanced Ti-Al-N alloy under uniaxial tensile loading10.1016/j.msea.2018.12.066 ↗
34. Precipitation behavior of silicide and synergetic strengthening mechanisms in TiB-reinforced high-temperature titanium matrix composites during multi-directional forging10.1016/j.jallcom.2021.159051 ↗
35. Hall-Petch relationship in Mg alloys: a review10.1016/j.jmst.2017.07.022 ↗
36. Enhanced Hall-Petch strengthening in graphene/Cu nanocomposites10.1016/j.jmst.2021.02.013 ↗
37. Hall-Petch relations and strengthening of Al-ZnO composites in view of grain size relative to interparticle spacing10.1016/j.scriptamat.2018.04.042 ↗
38. Perspective on hetero-deformation induced (HDI) hardening and back stress10.1080/21663831.2019.1616331 ↗
39. Local strain rate sensitivity of single α phase within a dual-phase Ti alloy10.1016/j.actamat.2016.01.057 ↗
40. An in-situ study on deformation and cracking initiation in oxygen-doped commercial purity titanium10.1016/j.mechmat.2020.103519 ↗
41. Intrinsic anisotropy of strain rate sensitivity in single crystal alpha titanium10.1016/j.actamat.2016.07.044 ↗
42. Nano-sized twins induce high rate sensitivity of flow stress in pure copper10.1016/j.actamat.2005.01.031 ↗
43. Micro-compression studies of face-centered cubic and body-centered cubic high-entropy alloys: size-dependent strength, strain rate sensitivity, and activation volumes10.1016/j.msea.2020.139429 ↗
44. Theory of tensile test10.1016/0001-6160(67)90211-8 ↗
45. Clyne · 1993 · 256
46. ASB induced phase transformation in high oxygen doped commercial purity Ti10.1016/j.msea.2021.142321 ↗
47. Micro-compression of high oxygen doped single-crystal titanium along different orientations10.1016/j.msea.2021.142449 ↗