Fracture locus characteristics of Al alloy 5083 processed by equal channel angular pressing using miniaturized specimens
Source abstract
Abstract
Abstract After severe plastic deformation (SPD) processing, aluminum alloys show increased strength but low ductility. However, the ductility of the materials obtained during tensile tests does not reflect the full plastic deformation ability of the materials. This work presents the results of a more comprehensive plasticity analysis, which is applied first time to material after SPD processing. The current study considers an aluminum alloy 5083 before and after equal channel angular pressing (ECAP). The plasticity analysis was implemented based on the fracture locus, which was plotted in the space of the equivalent strain to fracture, the stress triaxiality parameter, and the Lode angle parameter using the Hosford–Coulomb (H–C) model. The parameters of the H–C model were determined using a combined experimental–numerical approach. It was found that the plasticity of the 5083 alloy strongly depended on a combination of the stress triaxiality and Lode angle parameter. However, the fracture locus of the material after ECAP processing showed slightly higher values of equivalent strain to fracture than that of the initial material. This approach makes it possible to estimate the ultimate plasticity of the materials after ECAP processing for a wide range of stress-strain states and can be used to predict fracture in plastic deformation processes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Mechanical properties of ultrafine-grained metals: new challenges and perspectives10.1002/adem.201500177 ↗
2. Twenty-five years of ultrafine-grained materials: achieving exceptional properties through grain refinement10.1016/j.actamat.2013.08.018 ↗
3. Review on superior strength and enhanced ductility of metallic nanomaterials10.1016/j.pmatsci.2018.02.002 ↗
4. The conflicts between strength and toughness10.1038/nmat3115 ↗
5. Fundamentals of superior properties in bulk nanoSPD materials10.1080/21663831.2015.1060543 ↗
6. Understanding the complete loss of uniform plastic deformation of some ultrafine-grained metallic materials in tensile straining10.1016/j.ijplas.2018.10.002 ↗
7. Multiple strengthening mechanisms in high strength ultrafine-grained Al–Mg alloys10.1016/j.msea.2019.138613 ↗
8. Effect of Mg on microstructure and mechanical properties of Al-Mg alloys produced by high pressure torsion10.1016/j.scriptamat.2018.09.033 ↗
9. Coupling of dislocations and precipitates: impact on the mechanical behavior of ultrafine grained Al–Zn–Mg alloys10.1016/j.actamat.2015.09.017 ↗
10. Mechanical behavior, deformation mechanism and microstructure evolutions of ultrafine-grained Al during recovery via annealing10.1016/j.msea.2019.138706 ↗
11. Improving the tensile ductility and uniform elongation of high-strength ultrafine-grained Al alloys by lowering the grain boundary misorientation angle10.1016/j.scriptamat.2014.01.020 ↗
12. Excellent combination of strength and ductility of Al-1.2Mn alloy with multi-scale lamellar structure10.1016/j.msea.2018.05.101 ↗
13. Influence of annealing parameters on the mechanical properties of heterogeneous lamella structured 5083 aluminum alloy10.22226/2410-3535-2019-4-556-560 ↗
14. Preparation of bulk nanolaminated aluminum alloy with high strength10.1016/j.msea.2019.138556 ↗
15. Ductility and plasticity of nanostructured metals: differences and issues10.1016/j.mtnano.2018.09.004 ↗
16. Formability of ultrafine grained metals produced by severe plastic deformation–an overview10.1002/adem.201800316 ↗
17. On the standards and practices for miniaturized tensile test – a review10.1016/j.fusengdes.2020.112006 ↗
18. Application of extended Mohr–Coulomb criterion to ductile fracture10.1007/s10704-009-9422-8 ↗
19. The effect of stress state on ductility in the moderate stress triaxiality regime of medium and high strength steels10.1016/j.ijmecsci.2012.10.003 ↗
20. Failure strain formulation via average stress triaxiality of an EH36 high strength steel10.1016/j.oceaneng.2014.09.019 ↗
21. Characterization of fracture loci in metal forming10.1016/j.ijmecsci.2014.04.003 ↗
22. Calibration of fracture locus in scope of uncoupled elastic–plastic-ductile fracture material models10.1016/j.advengsoft.2013.05.007 ↗
23. Identification of ductile damage parameters for pressure vessel steel10.1016/j.nucengdes.2015.12.014 ↗
24. Experiments on stress-triaxiality dependence of material behavior of aluminum alloys10.1016/j.mechmat.2009.11.012 ↗
25. A new approach for ductile fracture prediction on Al 2024-T351 alloy10.1016/j.ijplas.2012.01.003 ↗
26. A damage model for predicting ductile fracture with considering the dependency on stress triaxiality and Lode angle10.1016/j.euromechsol.2020.104048 ↗
27. Experimental program and numerical assessment for determination of stress triaxiality and J3 effects on AA6101-T410.1016/j.tafmec.2020.102476 ↗
28. An assessment of isotropic constitutive models for ductile fracture under high and low stress triaxiality10.1016/j.ijplas.2011.10.005 ↗
29. Micro-mechanical studies on the effect of the stress triaxiality and the Lode parameter on ductile damage10.1016/j.ijplas.2013.03.012 ↗
30. Extension of a shear-controlled ductile fracture model considering the stress triaxiality and the Lode parameter10.1016/j.ijsolstr.2012.10.007 ↗
31. Ductile fracture of aluminum 2024-T351 under proportional and non-proportional multi-axial loading: Bao–Wierzbicki results revisited10.1016/j.ijsolstr.2015.05.006 ↗
32. Ductile fracture experiments with locally proportional loading histories10.1016/j.ijplas.2015.08.004 ↗
33. Analysis of ductile fracture by extended unified strength theory10.1016/j.ijplas.2018.02.011 ↗
34. Fracture of an anisotropic rare-earth-containing magnesium alloy (ZEK100) at different stress states and strain rates: experiments and modeling10.1016/j.ijplas.2019.07.011 ↗
35. Coupled damage variable based on fracture locus: modelling and calibration10.1016/j.ijplas.2019.11.002 ↗
36. A comparative study of three groups of ductile fracture loci in the 3D space10.1016/j.engfracmech.2014.12.023 ↗
37. Comparative study on ductile fracture prediction of high-tensile strength marine structural steels10.1080/17445302.2020.1743552 ↗
38. On fracture locus in the equivalent strain and stress triaxiality space10.1016/j.ijmecsci.2004.02.006 ↗
39. A new model of metal plasticity and fracture with pressure and Lode dependence10.1016/j.ijplas.2007.09.004 ↗
40. Modeling the ductile fracture behavior of an aluminum alloy 5083-H116 including the residual stress effect10.1016/j.engfracmech.2012.02.014 ↗
41. Effects of the stress state on plasticity and ductile failure of an aluminum 5083 alloy10.1016/j.ijplas.2009.03.006 ↗
42. Paint-bake effect on the plasticity and fracture of pre-strained aluminum 6451 sheets10.1016/j.ijmecsci.2017.01.002 ↗
43. Calibration of the modified Mohr-Coulomb fracture model by use of localization analyses for three tempers of an AA6016 aluminium alloy10.1016/j.ijmecsci.2020.106122 ↗
44. Interactive effect of stress state and grain size on fracture behaviours of copper in micro-scaled plastic deformation10.1016/j.ijplas.2018.10.013 ↗
45. A rate-dependent Hosford-Coulomb model for predicting ductile fracture at high strain rates10.1051/epjconf/20159401080 ↗
46. Micromechanically-motivated phenomenological Hosford–Coulomb model for predicting ductile fracture initiation at low stress triaxialities10.1016/j.ijsolstr.2015.02.024 ↗
47. Ductile fracture prediction of EH36 grade steel based on Hosford–Coulomb model10.1080/17445302.2019.1565300 ↗
48. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
49. A comprehensive review on equal channel angular pressing of bulk metal and sheet metal process methodology and its varied applications10.1016/j.jmapro.2020.10.032 ↗
50. Microstructures and mechanical properties of equal channel angular pressed 5083 Al alloy10.2320/matertrans.42.1074 ↗
51. Tensile deformation characteristics of a nano-structured 5083 Al alloy10.1016/j.jallcom.2004.03.148 ↗
52. Investigation of pre-existing particles in Al 5083 alloys10.1016/j.jallcom.2017.12.329 ↗
53. Effect of the initial ECAP passes on crystal texture and residual stresses of 5083 aluminum alloy10.1007/s12613-020-2017-0 ↗
54. Control of second-phase particles in the Al-Mg-Mn alloy AA 508310.1016/j.jallcom.2016.08.070 ↗
55. Basaran · 2011
56. On the ductile enlargement of voids in triaxial stress fields∗10.1016/0022-5096(69)90033-7 ↗
57. Strain-hardening and interaction effects on the growth of voids in ductile fracture10.1016/0013-7944(71)90040-3 ↗
58. On the mechanisms of ductile failure in high-strength steels subjected to multi-axial stress-states10.1016/0022-5096(76)90024-7 ↗
59. Rupture mechanisms in combined tension and shear—experiments10.1016/j.ijsolstr.2006.09.031 ↗
60. Damage and failure at negative stress triaxialities: experiments, modeling and numerical simulations10.1016/j.ijplas.2017.12.003 ↗
61. Xue · 2007
62. Micro-tensile behavior of Mg-Al-Zn alloy processed by Equal Channel Angular Pressing (ECAP)
63. Mechanical behavior and microstructure of a thermally stable bulk nanostructured Al alloy10.1007/s11661-001-0207-6 ↗
64. Dynamic observations of deformation in an ultrafine-grained Al-Mg alloy with bimodal grain structure10.1007/s10853-008-2950-1 ↗
65. Calibration of ductile fracture criteria at negative stress triaxiality10.1016/j.ijmecsci.2016.02.001 ↗
66. A triaxiality and Lode parameter dependent ductile fracture criterion10.1016/j.engfracmech.2014.07.010 ↗
67. Rupture mechanisms in combined tension and shear-Micromechanics10.1016/j.ijsolstr.2007.01.010 ↗
68. Calibration of ductile fracture properties of a cast aluminum alloy10.1016/j.msea.2007.01.047 ↗