A SECM study of redox activity on Al-Mg-Si alloy in organic/aqueous solution
Source abstract
Abstract
Abstract SECM (Scanning electrochemical microscopy) coupled with either an organic solution or a neutral aqueous solution was applied to investigate the localized corrosion mechanism of Al-Mg-Si alloy. SEM (Scanning Electron Microscopy) and EDS (Energy Dispersive Spectroscopy) experiments were used to clarify how intermetallic may influence its cathodic activity. In the SECM tests, FcMeOH (Ferrocene methanol) was used as a redox mediator in both two solutions. The SECM results obtained from the organic system reveal some possible sites susceptible to corrosion attack. These sites are composed of large intermetallic particles. Combining with the SECM test conducted in the aqueous system, these sites also show high redox activity. The SECM experiments also reveal that MgSi intermetallic particles after 24-h corrosion show as strong cathodic activity as Al(Fe, Mn)Si.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Aluminum Alloy Microstructure Properties · Anodic Oxide Films and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Corrosion mechanism of Al, Al-Zn and Al-Zn-Sn alloys in 3wt% NaCl solution10.1016/j.corsci.2014.07.018 ↗
2. Electrochemical evaluation of sodium metabisulfite as environmentally friendly inhibitor for corrosion of aluminum alloy 6061 in a chloride solution10.1016/j.jallcom.2015.01.003 ↗
3. Corrosion performance of high pressure die-cast Al-Si-Mg-Zn alloys in 3.5 wt% NaCl solution10.1016/j.jallcom.2018.12.313 ↗
4. Effects of pH and chloride concentration on pitting corrosion of AA6061 aluminum alloy10.1016/j.corsci.2008.03.006 ↗
5. Growth mechanism of anodic oxide films on pure aluminium in aqueous acidic and alkaline solutions10.1007/s100080050081 ↗
6. Effects of applied anodic potential and pH on the repassivation kinetics of pure aluminium in aqueous alkaline solution10.1007/s100080050135 ↗
7. Corrosion mechanism of pure aluminium in aqueous alkaline solution10.1007/s100080050203 ↗
8. The influence of MgSi particle reactivity and dissolution processes on corrosion in Al-Mg-Si alloys10.1016/j.electacta.2008.05.078 ↗
9. Influence of second phase particles on initial electrochemical properties of AA7010-T7610.1016/j.electacta.2007.09.004 ↗
10. Study of passivation of Al and Al–Sn alloys in borate buffer solutions using electrochemical impedance spectroscopy10.1016/S0013-4686(02)00246-3 ↗
11. Fluorescence and near-field scanning optical microscopy for investigating initiation of localized corrosion of Al 202410.1149/1.1393960 ↗
12. Integrated AFM and SECM for in situ studies of localized corrosion of Al alloys10.1016/j.electacta.2006.12.073 ↗
13. In situ SECM mapping of pitting corrosion in stainless steel using submicron Pt ultramicroelectrode and quantitative spatial resolution analysis10.1016/j.corsci.2018.08.014 ↗
14. Galvanic coupling effects on the corrosion behavior of the 6061 aluminum alloy used in research nuclear reactors10.1016/j.jnucmat.2020.152440 ↗
15. A SECM study of heterogeneous redox activity at AA2024 surfaces10.1149/1.1593041 ↗
16. Visualization and characterization of electroactive defects in the native oxide film on aluminium10.1039/b201539k ↗
17. Impurities induced localized corrosion between copper and tantalum nitride during chemical mechanical planarization10.1149/1.2364309 ↗
18. Formation and characterisation of a chromate conversion coating on AA6060 aluminium10.1016/j.corsci.2004.08.012 ↗
19. Formation of amorphous precipitates in a corroded over-aged Al-Mg-Si alloy10.1016/j.apsusc.2021.149329 ↗
20. Electrochemical behavior and localized corrosion associated with Mg2Si particles in Al and Mg alloys10.1149/2.002201eel ↗