journal article·2021-11

Revealing grain structure development and texture evolution during elastic stress-assist aging of Mg–Zn alloys

Yongjian Wang, Liping Zhong, Yuchen Dou, Xiaofeng Zhang

Publisher page

Abstract

Abstract The evolution of grain structure and corresponding texture development of Mg alloys under the assist of multiple physical fields are interesting and meaningful topics, and are investigated in this paper in detail. The results show that the texture development of stress free (SF) aged alloy exhibits a remarkable difference in type and intensity to those of 100 MPa tensile stress (100-TS) and 100 MPa compressive stress (100-CS) aged alloys at 160 °C. In the early stage of SF aging, preferential growth of //ED grains give rise to the enhancement of //ED fiber component. The increased pinning force caused by considerable precipitates at high energy boundaries reduce the boundary mobility, and therefore lead to a weak basal texture at the end of aging. Heavily activated prismatic dislocations under the action of 100-TS aging facilitate the precipitation of secondary phases at grain boundaries and lattice rotation induced continuous static recrystallization (CSRX) in the early stage of aging, which contributes to a weak basal texture and the formation of non-fiber texture. Upon further aging, the preferential growth of pre-existing //ED grains and recrystallized grains formed by CSRX contribute the enhancement of //ED basal fiber component. In the case of 100-CS aging, the slight growth of grains and lattice rotation caused by prismatic dislocations lead to the enhancement of //ED texture component in the early stage of aging. After long-time compressive stress aging, preferential growth of //ED grains gives rise to the formation of - double fiber components.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. The role of recrystallization and grain growth in optimizing the sheet texture of magnesium alloys with calcium addition during annealing10.1016/j.jma.2019.07.010 ↗
2. Texture control by {10-12} twinning to improve the formability of Mg alloys: a review10.1016/j.jmst.2019.03.045 ↗
3. A review on the effect of rare-earth elements on texture evolution during processing of magnesium alloys10.1007/s10853-016-0371-0 ↗
4. Crystal plasticity analysis of texture development in magnesium alloy during extrusion10.1016/j.ijplas.2011.02.007 ↗
5. Texture evolution during static recrystallization of cold-rolled magnesium alloys10.1016/j.actamat.2015.12.045 ↗
6. The origin and enhancement of {0001}<112-0>texture during heat treatment of rolled AZ31B magnesium alloys10.1016/j.actamat.2015.04.043 ↗
7. Effect of deformation twinning on crystallographic texture evolution in a Mg–6.6Zn–0.2Ca (ZX70) alloy during recrystallisation10.1016/j.jallcom.2018.10.065 ↗
8. Individual effect of recrystallisation nucleation sites on texture weakening in a magnesium alloy: Part 1- double twins10.1016/j.actamat.2017.06.015 ↗
9. Current issues in magnesium sheet alloys: Where do we go from here?10.1016/j.scriptamat.2014.04.017 ↗
10. Quasi-in-situ observing the rare earth texture evolution in an extruded Mg-Zn-Gd alloy with bimodal microstructure
11. Orientational analysis of static recrystallization at compression twins in a magnesium alloy AZ3110.1016/j.msea.2009.03.045 ↗
12. Deformation microstructures and textures of some cold rolled Mg alloys10.1016/S0921-5093(04)00942-6 ↗
13. The recrystallization and texture of magnesium–zinc–cerium alloys10.1016/j.scriptamat.2008.05.021 ↗
14. Triggering rare earth texture modification in magnesium alloys by addition of zinc and zirconium10.1016/j.actamat.2013.12.015 ↗
15. Individual effect of recrystallisation nucleation sites on texture weakening in a magnesium alloy: Part 2- shear bands10.1016/j.actamat.2017.12.019 ↗
16. Effects of minor Nd and Er additions on the precipitation evolution and dynamic recrystallization behavior of Mg–6.0Zn–0.5Mn alloy
17. Enhanced age hardening response and precipitation evolution of elastic stress aged Mg–Zn alloys10.1016/j.jallcom.2020.158513 ↗
18. The precipitation behaviors, martensite transformation and superelasticity in the aged Ni-rich TiNi alloy with the assist of super-high stress10.1016/j.intermet.2018.10.015 ↗
19. Effect of grain boundaries on the preferential orientation distribution of θ′ precipitates in stress-aged Al–2Cu alloy bicrystals10.1016/j.jallcom.2019.04.264 ↗
20. A three-dimensional characterization method for the preferentially oriented precipitation of Ω-phase in stress-aged Al–Cu–Mg–Ag single crystal10.1016/j.matchar.2019.04.035 ↗
21. Different precipitation hardening behaviors of extruded Mg–6Gd–1Ca alloy during artificial aging and creep processes10.1016/j.msea.2018.01.003 ↗
22. Modelling recrystallization textures driven by intragranular fluctuations implemented in the viscoplastic self-consistent formulation10.1016/j.actamat.2018.11.002 ↗
23. Texture evolution during dynamic recrystallization in a magnesium alloy at 450°10.1016/j.actamat.2013.12.025 ↗
24. Effect of circumferential strain rate on dynamic recrystallization and texture of Mg-13Gd-4Y–2Zn-0.5Zr alloy during rotary backward extrusion10.1016/j.jma.2019.12.012 ↗
25. Normal and abnormal grain growth in magnesium: experimental observations and simulations10.1016/j.jmst.2020.01.014 ↗
26. Texture and mechanical behavior evolution of age-hardenable Mg–Nd–Zn extrusions during aging treatment10.1016/j.msea.2011.09.011 ↗
27. Creep behaviors of hot compressed Mg–4Y–2Nd–0.2Zn–0.5Zr alloy with and without aging10.1016/j.msea.2017.10.014 ↗
28. Analysis of abnormal texture formation and strengthening mechanism in an extruded Mg–Gd–Y–Zn–Zr alloy10.1016/j.jmst.2019.11.021 ↗
29. Abnormal grain growth induced by sub-boundary-enhanced solid-state wetting: Analysis by phase-field model simulations10.1016/j.actamat.2008.10.030 ↗
30. Investigation of PrismSlip in Warm-Rolled AZ31 Alloy10.1007/s11661-011-0800-2 ↗
31. Orientation dependent behavior of tensile-creep deformation of hot rolled Ti65 titanium alloy sheet10.1016/j.jmst.2020.10.021 ↗
32. The texture dependence of strength in slip and twinning predominant deformations of Mg–3Al–1Zn alloy10.1016/j.msea.2018.01.064 ↗
33. Distribution characteristics of in-grain misorientation axes in cold-rolled commercially pure titanium and their correlation with active slip modes10.1007/s11661-010-0410-4 ↗
34. Twin recrystallization mechanisms and exceptional contribution to texture evolution during annealing in a magnesium alloy10.1016/j.actamat.2016.12.058 ↗
35. Role of starting texture and deformation modes on low-temperature shear formability and shear localization of Mg–3Al–1Zn alloy10.1016/j.actamat.2014.12.006 ↗
36. Elevated-temperature deformation mechanisms and tensile ductility10.1007/s11837-999-0008-8 ↗
37. Deformation mechanisms in h.c.p. metals at elevated temperatures—I. Creep behavior of magnesium10.1016/0001-6160(81)90034-1 ↗
38. Deformation mechanisms in h.c.p. metals at elevated temperatures—II. Creep behavior of a Mg-0.8% Al solid solution alloy10.1016/0001-6160(82)90009-8 ↗
39. Basal slip mediated tension twin variant selection in magnesium WE43 alloy10.1016/j.actamat.2019.03.018 ↗
40. Development of low-alloyed and rare-earth-free magnesium alloys having ultra-high strength10.1016/j.actamat.2018.03.002 ↗
41. Effects of initial texture on the three-dimensional creep anisotropic behaviors of dilute Mg–Y binary alloy sheets10.1016/j.msea.2019.138336 ↗
42. Precipitation and hardening in magnesium alloys10.1007/s11661-012-1217-2 ↗
43. The role of the Zn/Nd ratio in the microstructural evolution of the Mg-Zn-Nd system during static recrystallization: grain boundary partitioning of solutes10.1016/j.scriptamat.2017.01.033 ↗
44. Pinning force from multiple second-phase particles in grain growth10.1016/j.commatsci.2014.06.030 ↗
45. Low-energy, mobile grain boundaries in magnesium10.1038/srep21393 ↗
46. Grain growth and texture evolution during annealing in an indirect-extruded Mg–1Gd alloy10.1016/j.jallcom.2013.09.028 ↗