Atmospheric oxidation of NbTi superconductor
Source abstract
Abstract
Abstract Nb–47 wt% Ti is the workhorse alloy of the superconducting magnet industry. Fabrication of “perfect” superconducting joints with electrical resistance values 10 − 12 Ω is necessary to operate the magnets in persistent-mode without a power supply, enabling the generation of the high stability magnetic fields required for MRI and NMR applications. Many jointing techniques involve exposure of the highly-reactive metallic filaments to air, and it is well known that exposures of more than a few minutes prevent successful superconducting joint formation. Here we present the first fundamental study of the oxidation kinetics and chemistry of the oxide layers on a superconducting NbTi alloy. We use angle-resolved x-ray photoelectron spectroscopy (AR-XPS) to analyse both the earliest stages of oxidation by gas dosing with pure oxygen in UHV, and also oxidation under industrially relevant conditions by exposure of clean surfaces to laboratory air for timescales up to an hour. The reaction layer is found to be a mixed Nb/Ti oxide, with little change in the Nb:Ti ratio with depth. The oxide formation follows logarithmic growth kinetics, increasing to a limiting thickness of 3.7 ± 0.3 nm after extended exposure to air.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electron and X-Ray Spectroscopy Techniques · Semiconductor materials and devices · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Melhem · 2011
2. Superconducting materials for large scale applications10.1109/JPROC.2004.833673 ↗
3. Persistent joint development for high field NMR10.1109/77.783267 ↗
4. R. F. Thornton, Superconducting Joint for Superconducting Wires and Coils and Method of of Forming, patent US4907338.
5. Analysis for formation of current path in the superconducting joint between Nb-Ti wires with the solder matrix replacement method10.1088/0953-2048/28/4/045019 ↗
6. L174/88: Off. J. Eur. Union. Vol 54, 2011 (doi:10.3000/17252555.L_2011.174.eng).
7. L4/61: Off. J. Eur. Union. Vol 57, 2014 (doi:10.3000/197677.L_2014.004.eng).
8. Superconducting joint between multifilamentary wires 1. Joint-making and results10.1016/0011-2275(76)90262-9 ↗
9. Electrical properties of cold-pressing welded NbTi persistent joints10.1016/j.cryogenics.2013.09.011 ↗
10. Evaluation of solders for superconducting magnetic shield10.1109/20.133563 ↗
11. Angle-resolved XPS and AES: depth-resolution limits and a general comparison of properties of depth-profile reconstruction methods10.1016/0368-2048(94)02270-4 ↗
12. Initial oxide-film growth on Mg-based MgAl alloys at room temperature10.1016/j.actamat.2008.05.020 ↗
13. Growth kinetics and mechanism of the initial oxidation of Al-based Al-Mg alloys10.1016/j.corsci.2010.03.028 ↗
14. XPS study of oxides formed on the surface of high-purity iron exposed to air10.1002/1096-9918(200008)30:1<372::AID-SIA721>3.0.CO;2-R ↗
15. On the natural Nb2O5 growth on Nb at room temperature10.1016/0039-6028(84)90661-7 ↗
16. Atmospheric oxidation of a Nb-Zr alloy studied with XPS10.1016/S0010-938X(03)00139-2 ↗
17. Low temperature oxidation of Nb and of Nb-compounds in relation to superconducting application10.1016/0022-5088(88)90336-0 ↗
18. Angle-resolved X-ray photoelectron spectroscopy study of the oxides on Nb surfaces for superconducting r.f. cavity applications10.1016/S0169-4332(02)01238-2 ↗
19. An X-ray photoelectron spectroscopy sputter profile study of the native air-formed oxide film on titanium10.1016/S0169-4332(98)00927-1 ↗
20. ARXPS and high energy XPS characterisation of titanium surfaces for medical implants10.1002/sia.2778 ↗
21. Über einen die erzeugung und verwandlung des lichtes betreffenden heuristischen gesichtspunkt10.1002/andp.19053220607 ↗
22. Hartree-Slater subshell photoionization cross-sections at 1254 and 1487 eV10.1016/0368-2048(76)80015-1 ↗
23. Film thickness measurements of SiO2 by XPS10.1002/sia.740210107 ↗
24. An esca method for determining the oxide thickness on aluminum-alloys10.1002/sia.740150109 ↗
25. Measurement of oxide film growth on Mg and Al surfaces over extended periods using XPS10.1016/S0039-6028(97)00054-X ↗
26. Lee · 1999
27. (Supplementary material [online]).
28. N. Fairley, CasaXPS Manual 2.3.15, Casa Software Limited.
29. Quantitative analysis of the inelastic background in surface electron spectroscopy10.1002/sia.740110902 ↗
30. van der Heide · 2012
31. High-temperature oxidation of titanium10.1016/0022-5088(67)90017-3 ↗
32. Auger and X-ray photoelectron spectroscopic and electrochemical characterization of titanium thin film electrodes10.1016/0039-6028(77)90007-3 ↗
33. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
34. Auger and Coster-Kronig broadening effects in the 2p and 3p photoelectron spectra from the metals 22Ti-30Zn10.1088/0305-4608/11/8/025 ↗
35. ESCA studies of some niobium compunds10.1016/0022-3697(75)90132-8 ↗
36. Deplacement chimique ESCA dans la serie des oxydes du niobium10.1016/0368-2048(77)85032-9 ↗
37. Biesinger
38. Comparative study of the native oxide on 316l stainless steel by XPS and ToF-SIMS10.1116/1.4927319 ↗
39. Calculations of electron inelastic mean free paths. V. Data for 14 organic compounds over the 50–2000 eV range10.1002/sia.740210302 ↗
40. Angle-resolved XPS studies of oxides at NbN , NbC , and Nb surfaces10.1002/sia.740100502 ↗
41. Thickness determination of uniform overlayers on rough substrates by angle-dependent XPS10.1016/0169-4332(95)00014-3 ↗
42. Surface roughness effects in quantitative XPS: magic angle for determining overlayer thickness10.1016/S0169-4332(97)00007-X ↗
43. Theory of formation of very thin oxide films on metals10.1063/1.1726791 ↗
44. Theory of the oxidation of metals10.1088/0034-4885/12/1/308 ↗
45. The effect of niobium on the oxidation behaviour of titanium in N2/20% O2 atmospheres10.1016/S0921-5093(00)00754-1 ↗
46. M. Delheusy, A. Stierle, N. Kasper, R. P. Kurta, A. Vlad, H. Dosch, C. Antoine, A. Resta, E. Lundgren, J. Andersen, X-ray investigation of subsurface interstitial oxygen at Nb/oxide interfaces, Appl. Phys. Lett. 92 (10).10.1063/1.2889474 ↗
47. The identification and characterisation of mixed oxidation states at oxidised titanium surfaces by analysis of X-ray photoelectron spectra10.1039/f19878300351 ↗