High performance aluminum foam-graphite dual-ion batteries and failure analysis
Source abstract
Abstract
Abstract In this work, we develop an aluminum foam-graphite dual-ion battery (Al foam-G DIB) with graphite cathode and Al foam anode, which both are environmentally friendly and low-cost electrode materials. Due to the high specific surface area and robust porous structure of the 3D Al foam, the Al foam-G DIB delivers a higher specific capacity and displays much better cycling stability than Al foil-G DIB. Moreover, the structural evolution of the Al foam anode over cycling is monitored, and the failure mechanism of Al foam-G DIB is discussed. The results demonstrate that the Al anode undergoes severe pulverizing and cracking due to volume change caused by charging and discharging, which is the main reason leading to capacity decay. The Al foam anode undergoes less structural crack compared with the Al foil anode due to the 3D robust porous characteristic, resulting in much better durability. Furthermore, it’s observed that the Al foam-G DIB displays better cycling stability at a higher current rate than that with a lower current rate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. MXene/Si@SiOx@C layer-by-layer superstructure with autoadjustable function for superior stable lithium storage10.1021/acsnano.8b08821 ↗
2. Double-shell Li-rich layered oxide hollow microspheres with sandwich-like carbon@spinel@layered@spinel@carbon shells as high-rate lithium ion battery cathode10.1016/j.nanoen.2019.02.040 ↗
3. Uniform distribution of alloying/dealloying stress for high structural stability of an Al anode in high-areal-density lithium-ion batteries10.1002/adma.201900826 ↗
4. One to one comparison of graphite-blended negative electrodes using silicon nanolayer embedded graphite versus commercial benchmarking materials for high energy lithium ion batteries10.1002/aenm.201700071 ↗
5. Ion-and electron-conductive buffering layer-modified Si film for use as a high-rate long-term lithium-ion battery anode10.1002/cssc.201801822 ↗
6. Practical challenges in employing graphene for lithium-ion batteries and beyond10.1002/smtd.201700099 ↗
7. Carbon foam with microporous structure for high performance symmetric potassium dual-ion capacitor10.1016/j.jechem.2019.08.013 ↗
8. A flexible dual-ion battery based on sodium-ion quasi-solid-state electrolyte with long cycling life10.1002/adfm.201906770 ↗
9. Secondary battery
10. Secondary electrical energy storage device and electrode therefor
11. Dual intercalating molten electrolyte batteries10.1149/1.2055041 ↗
12. Electrochemistry of room-temperature chloroaluminate molten salts at graphitic and nongraphitic electrodes10.1007/BF00243740 ↗
13. (EMIm)+(PF6)− ionic liquid unlocks optimum energy/power density for architecture of nanocarbon-based dual-ion battery10.1002/aenm.201601378 ↗
14. Carbon-based dual-ion battery with enhanced capacity and cycling stability10.1002/celc.201801108 ↗
15. A new dual-ion battery based on amorphous carbon10.1016/j.scib.2019.08.021 ↗
16. In situ dilatometric study of the binder influence on the electrochemical intercalation of bis(trifluoromethanesulfonyl) imide anions into graphite10.1016/j.electacta.2017.10.042 ↗
17. A novel aluminum-graphite dual-ion battery10.1002/aenm.201502588 ↗
18. Research progress on negative electrodes for practical Li-ion batteries: beyond carbonaceous anodes10.1002/aenm.201402225 ↗
19. Strategies towards low-cost dual-ion batteries with high performance10.1002/anie.201814294 ↗
20. Germanium-based high-performance dual-ion batteries10.1039/C9NR08783D ↗
21. Flexible interface design for stress regulation of a silicon anode toward highly stable dual-ion batteries10.1002/adma.201908470 ↗
22. High-performance lithium-ion-based dual-ion batteries enabled by few-layer MoSe2/nitrogen-doped carbon10.1021/acssuschemeng.9b06815 ↗
23. Conversion/alloying pseudocapacitance-dominated perovskite KZnF3 anode for advanced lithium-based dual-ion batteries10.1002/chem.201905105 ↗
24. Dual-ion battery using graphitic carbon and Li4Ti5O12: suppression of gas formation and increased cyclability10.1016/j.electacta.2019.135238 ↗
25. Tetraethylammonium tetrafluoroborate additives for suppressed gas formation and increased cycle stability of dual-ion battery10.1016/j.electacta.2020.135711 ↗
26. A bipolar and self-polymerized phthalocyanine complex for fast and tunable energy storage in dual-ion batteries10.1002/ange.201904242 ↗
27. Dendrite-free deposition on lithium anode toward long-life and high-stable Li-graphite dual-ion battery10.1039/C9CC03175H ↗
28. Dendrite-free lithium anode enables the lithium-graphite dual-ion battery with much improved cyclic stability10.1021/acsaem.8b01764 ↗
29. Development of safe and sustainable dual-ion batteries through hybrid aqueous/nonaqueous electrolytes10.1002/aenm.201902709 ↗
30. Hybrid aqueous/nonaqueous water-in-bisalt electrolyte enables safe dual ion batteries10.1002/smll.201905838 ↗
31. Quasi-solid-state dual-ion sodium metal batteries for low-cost energy storage
32. All carbon dual ion batteries
33. Phosphorus-doped porous hollow carbon nanorods for high-performance sodium based dual-ion battery10.1039/C9TA11246D ↗
34. High-performance rechargeable zinc-based dual-ion batteries10.1039/C9SE00744J ↗
35. A Review on the features and progress of dual-ion batteries10.1002/aenm.201703320 ↗
36. Nature of FeSe2/N-C anode for high performance potassium ion hybrid capacitor10.1002/aenm.201903277 ↗
37. Dual-graphite cells based on the reversible intercalation of bis(trifluoromethanesulfonyl)imide anions from an ionic liquid electrolyte10.1039/C4EE01873G ↗
38. LiNi0.5Mn1.5O4 porous nanorods as high-rate and long-life cathodes for Li-ion batteries10.1021/nl401072x ↗
39. Higher, stronger, better…a review of 5 volt cathode materials for advanced lithium-ion batteries10.1002/aenm.201200068 ↗
40. Anion secondary batteries utilizing a reversible BF4 insertion/extraction two-dimensional Si material10.1039/c4ta00456f ↗
41. Dual-ion cells based on the electrochemical intercalation of asymmetric fluorosulfonyl-(trifluoromethanesulfonyl) imide anions into graphite10.1016/j.electacta.2014.03.070 ↗
42. Synthesis and enhanced electrochemical performance of Li2CoPO4F cathodes under high current cycling10.1039/c2cp41624g ↗
43. ZnS-Sb2S3@C core-double shell polyhedron structure derived from metal-organic framework as anodes for high performance sodium ion batteries10.1021/acsnano.7b03321 ↗
44. Flower-like vanadium suflide/reduced graphene oxide composite: an energy storage material for aluminum-ion batteries10.1002/cssc.201702270 ↗
45. Solubility of lithium salts formed on the lithium ion battery negative electrode surface in organic solvents10.1149/1.3239850 ↗