High-rate lithium storage and kinetic investigations of a cubic Mn2SnO4@Carbon nanotube composite anode
Source abstract
Abstract
Abstract To solve battery performance problems, the development of novel materials with excellent electrochemical properties is urgently needed. In this study, a facile hydrothermal method was used to synthesize tri-component Mn2SnO4 anchored on carbon nanotubes (Mn2SnO4@MWCNTs) composite materials with cubic particles and high porosity. The structure and composition of the composite materials were analyzed using microscopic techniques. The composite anode material has a high lithium storage capacity of 1120 mAh g−1 (@ 0.05 C) and good stability at high rates of up to 10.0 C. The kinetic properties during the electrochemical reaction were also investigated. The synergistic effects of the composite anode enable faster charge transfer as evidenced by impedance spectroscopy, which shows that the composite electrode has a charge transfer resistance of 56 Ω, whereas that of the bare Mn2SnO4 electrode is 88 Ω. The enhanced electrochemical performance of the Mn2SnO4@MWCNTs anode is attributed to the mesoporous structure and the addition of MWCNTs, which enable faster insertion/extraction of Li+ ions into/from the material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Carbon-coated V2O5 nanocrystals as high performance cathode material for lithium ion batteries10.1021/cm202812z ↗
2. High-performance anode materials for rechargeable lithium-ion batteries10.1007/s41918-018-0001-4 ↗
3. Quantifying the factors limiting rate performance in battery electrodes10.1038/s41467-019-09792-9 ↗
4. A nanocomposite of SnO2 and single-walled carbon nanohorns as a long life and high capacity anode material for lithium ion batteries10.1039/c1ra00267h ↗
5. Controlled synthesis of SnO2@carbon core-shell nanochains as high-performance anodes for lithium-ion batteries10.1039/c1jm11364j ↗
6. SnO2-coated multiwall carbon nanotube composite anode materials for rechargeable lithium-ion batteries10.1016/j.electacta.2010.08.078 ↗
7. Facile preparation of porous Mn2SnO4/Sn/C composite cubes as high performance anode material for lithium-ion batteries10.1021/acs.jpcc.5b11935 ↗
8. Mesoporous TiO2-Sn@C core-shell microspheres for Li-ion batteries10.1039/c3cc40671g ↗
9. Uniformly dispersed Sn-MnO@C nanocomposite derived from MnSn(OH)6 precursor as anode material for lithium-ion batteries
10. In situ deposition of hierarchical architecture assembly from sn-filled cnts for lithium-ion batteries10.1021/am401442v ↗
11. Graphene networks anchored with Sn@Graphene as lithium ion battery anode10.1021/nn406105n ↗
12. One-pot synthesis of tin-embedded carbon/silica nanocomposites for anode materials in lithium-ion batteries10.1021/nn303570s ↗
13. Simple synthesis of metallic Sn nanocrystals embedded in graphitic ordered mesoporous carbon walls as superior anode materials for lithium ion batteries10.1016/j.jpowsour.2012.07.047 ↗
14. Ultrafine tin nanocrystallites encapsulated in mesoporous carbon nanowires: scalable synthesis and excellent electrochemical properties for rechargeable lithium ion batteries10.1039/c0cc03385e ↗
15. Uniform nano-Sn/C composite anodes for lithium ion batteries10.1021/nl303823k ↗
16. A high-capacity cathode for lithium batteries consisting of porous microspheres of highly amorphized iron fluoride densified from its open parent phase10.1002/aenm.201200209 ↗
17. Facile preparation of porous FeF3 nanospheres as cathode materials for rechargeable lithium-ion batteries10.1016/j.jpowsour.2013.02.026 ↗
18. Use of X-ray photoelectron spectroscopy to study bonding in Cr, Mn, Fe, and Co compounds10.1063/1.1678348 ↗
19. Electrochemical degradation of 4-chlorophenol at nickel-antimony doped tin oxide electrode10.1016/j.chemosphere.2006.04.061 ↗
20. Preparation of Mn2SnO4 nanoparticles as the anode material for lithium secondary battery10.1016/j.materresbull.2008.05.006 ↗
21. Preparation of carbon-coated NiCo2O4@ SnO2 hetero-nanostructures and their reversible lithium storage properties10.1002/smll.201400152 ↗
22. One-step calcination-free synthesis of multicomponent spinel assembled microspheres for high-performance anodes of Li-ion batteries: a case study of MnCo2O410.1021/am404862v ↗
23. Bismuth oxide: a new lithium-ion battery anode10.1039/c3ta12655b ↗
24. Highly stable and reversible lithium storage in SnO2 nanowires surface coated with a uniform hollow shell by atomic layer deposition10.1021/nl502192p ↗
25. Controlled synthesis of hierarchical CoxMn3−xO4 array micro-/nanostructures with tunable morphology and composition as integrated electrodes for lithium-ion batteries10.1039/C3EE41181H ↗
26. Co2SnO4 nanocrystals anchored on graphene sheets as high-performance electrodes for lithium-ion batteries10.1016/j.electacta.2014.11.018 ↗
27. Selective formation of carbon-coated, metastable Amorphous ZnSnO3 nanocubes containing mesopores for use as high-capacity lithium-ion battery10.1002/smll.201400371 ↗
28. High performance arsenic: multiwall carbon nanotube composite anodes for Li-ion batteries10.1149/2.1311707jes ↗
29. Galvanostatic intermittent titration and performance based analysis of LiNi0.5Co0.2Mn0.3O2 cathode10.1149/2.1701713jes ↗
30. Determination of the kinetic parameters of mixed-conducting electrodes and application to the system Li3Sb10.1149/1.2133112 ↗